EM-TECHNIK Series 1C
The flexible tube is pressed onto the connecting sleeve integrated onto the connector body. The flexible tube is secured using a clamping ring (1A) or a sealing ring and a cutting ring (1C), locking is via a knurled nut (1A/1C).
1) Thread manufactured without seam => High tightness, long term stability
2) Hexagon manufactured according to DIN
3) Sealed by PTFE sealing ring => Maximum media resistance
4) Connector available in PA, PP, PVDF, PFA => High media resistance
5) Thread manufactured according to DIN, USAS or JIS => Various connection options
6) Connecting sleeve manufactured without seam => High tightness, long term stability
7) Cutting ring made of PEEK => Optimum guard against pull-off forces
The connection principle used in the Series 1C from EM-TECHNIK entails pushing the firm flexible tube or the plastic pipe onto an integrated connecting sleeve and using a sealing ring to produce a tight fit. The tube is secured in place by a cutting ring, which is forced against the tube by a knurled nut. The more the knurled nut is screwed onto the connector body, the more the cutting ring wedges the flexible tube or pipe. Screwing on the knurled nut causes a shear force to act via the cutting ring, which intensifies the contact pressure. The result is a tight, friction-locked connection which can be released at any time and minimizes the dead volume.