 | Products / Services: |  |
| Click on a category to see this company's product/service line for the chosen category. | ||
 |  |
| Aalborg Instruments | Orangeburg, NY | |
| |||||||||
| * Click on an image to enlarge it in a new window * | |||||||||
.jpg) | In Line Flow Meters V Meters are designed with uniquerotatable scales of dual air-water direct reading graduationsshowing SCFM and L/min (air), as well as GPMand LPM (water) markings. Heavy-duty flow meters are fully enclosed in a brushed stainlesssteel case. Ideal for industrial applications with flow rates of up to116 GPM / 440 L/min and 250 SCFM /7080 L/min. Used for flowmeasurements of liquids (water) and gases (air). Made entirely of PTFE, PFA, and PCTFE, theModel F flow meter is excellent for high-purityapplications or use with corrosive liquids. Additional Info: http://www.aalborg.com/index.php/main_page/product_overview_list   | ||||||||
.jpg) | KITS Designed especially for the laboratory these kits offer a diverse economical way of acquiring flow measurement capabilities. Since all 150 mm flow tubes in this catalog are interchangeable, additional flow tubes may be added later (see flow tables, pages 43 to 49). A handy selection of flow meters is presented in kit form. THREE TYPES OF KITS ARE OFFERED ✓ Aluminum Flow Meter Kit. ✓ Stainless Steel Flow Meter Kit. ✓ PTFE Flow Meter Kit. For non-corrosive fluids use the Aluminum Kit. For corrosives consider the Stainless Steel Kit. For corrosive applications at lower pressure orfor high purity fluid service specify the PTFE Kit. | ||||||||
.jpg) | GAS PROPORTIONERS BACK PRESSURE COMPENSATED To blend two or three gases in homogeneous infinitely variable concentrations, directly at the end use point, this Model G Gas Proportioner is unsurpassed in convenience and economy. Gas proportioners pay for themselves since they eliminate the need for expensive custom blended gas mixtures. Design Features ✓ Blending of two or three gases withgas proportioners obviates the need for: ✓ ORDERING FIXED GAS MIXTURES. ✓ CONTAMINATION FROM REUSABLE GAS CYLINDERS. ✓ POTENTIALLY INACCURATE MIXTURES BY GAS SUPPLIERS. ✓ Rib-guided or fluted metering tubesfacilitate stable, accurate readings. ✓ OPTIGRADTM scales minimize parallaxand eye fatigue. ✓ Interchangeability of flow tubesand floats. ✓ Simple means of panel mounting. | ||||||||
.jpg){kind=small} | PX MULTIPLE TUBE FLOW METERS Px Meters are convenient for applications where several streams of gases or liquids are to be metered in individual channels or manifolded. Design Features ✓ Rib-guided or fluted metering tubes facilitate stable, accurate readings. ✓ Interchangeability of flow tubes and floats. ✓ Manifolding at inlet or outlet. ✓ Ease of installation and exchange of flow tubes. ✓ "Non-rotating" adapter feature -glass flow tubes are preventedfrom turning during the tighteningphase of the assembly procedure. ✓ OPTIGRADTM scales minimizeparallax and eye fatigue. ✓ Chemical compatibility. ✓ Simple means of panel mounting. Meters may be supplied with built-in needle valves (CVTM), high precision metering valves (MFVTM) with "non-rising stems", or with no valves. Generally for gas metering, it is recommended that valves are positioned at inlets (bottom) for liquids valves may be positioned either at outlets (top) or inlets. | ||||||||
.jpg){kind=small} | MULTIPLE TUBE-PTFE GLASS FLOW METERS Tx Model TX Multiple Tube Meters are ideal for applications where several streams of corrosive gases or liquids are to be metered in individual channels or as a controlled mixer in manifolded models. Design Features ✓ Constructed of inert materials:Borosilicate Glass, PTFE and PCTFE. ✓ Chemical inert wetted partswithin mechanically rigid frame. ✓ Rib-guided or fluted metering tubesfacilitate: stable, accurate readings. ✓ OPTIGRADTM scales minimizeparallax and eye fatigue. ✓ Simple means of panel mounting. ✓ Interchangeability of flow tubesand floats. ✓ Conveniently overlapping flowranges available in both standardmillimeter and direct reading scales. For vacuum service it is recommended that meters are ordered with valves at the outlet. | ||||||||
.jpg){kind=small} | SINGLE TUBE FLOW METERS Designed for low flow rates, the Model P Flow Meter is a precision instrument embodying the inherent simplicity, versatility and economy of the classical rotameter. It is particularly suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, liquid and gas measurement in laboratories, pilot plants, flow and level indicating,etc. Design Features ✓ Rib-guided or fluted metering tubesfacilitate stable, accurate readings. ✓ Magnifier lens in front shield to enhanceread ing resolution. ✓ Interchangeability of flow tubes and floats. ✓ Ease of installation and exchange offlow tubes. ✓ "Non-rotating" adapter feature - glassflow tubes are prevented from turningduring the tightening phase of theassembly procedure. ✓ OPTIGRADTM scales minimize parallaxand eye fatigue. ✓ Chemical compatibility. ✓ Simple means of panel mounting. Meters are available with built-in needle valves (CVTM), high precision metering valves (MFVTM) with "non-rising stems", or with no valves. The higher cost of MFVTM valves is justified whenever high sensitivity control and resolution are desirable particularly in conjunction with metering tubes of very low flow rates. | ||||||||
.jpg) | Model T Single Tube PTFE/Glass Flow Meters accommodate low flow rate measurement. Design Features
Model T Single Flow Tube PTFE Meter, designed for low flowrates, is a precision instrument embodying the inherent simplicity, versatility and economy of the classical Variable Area meter. It is particularly suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, liquid and gas measurement in laboratories, pilot plants, and flow and level indicating. 150 mm meters are anailable with built-in needle valves (CV™) or high precision valves (HRT™). Shipped completely assembled, flow meters include standard mounting fittings in a choice of materials, side plates, thick protective magnifying front shield and back plate, optional built-in control valve, and flow tubes selected from the Flow Capacities tables. Panel mounting style is convertible to bench mounting through the use of the optional acrylic tripod with a built-in spirit leveler and leveling screws. | ||||||||
.jpg) | Seamless Bodied Flanged Rotameter Aalborg®'s expanded M Meter line includes the Flanged M Style Rotameter. It distinguishes itself from other OEM models due to its seamless brushed stainless steel body. The result is safe, armored construction preferred for industrial applications performed under heavy-duty, harsh conditions. Accuracy ±3% FS. M Meters are well-suited to industrial applications including:
Design Features: • Solid Body – No screws or welding. • Thick polycarbonate safety shields. • Fluted or plain tapered tubes. • Direct reading metric and English system scales. • Unique design facilitates easy maintenance and cleaning. • Accuracy ±3% FS. This heavy-duty flow meter is ideal for industrial applications with flow rates up to 116 GMP/440 L/min and 250 SCFM/ 7080 L/min and is used with industrial air and water service. Aalborg®'s Flanged M Style Meters are graduated for direct reading. Models are equipped with flanged end fittings for easy in-line installation. Wetted parts include borosilicate glass flow tubes, Viton® o-rings, and 316 stainless steel fittings, guide rods, floats, and float stops. For the Flanged M Style Meter's Specifications and Materials of Construction, visit Aalborg®'s online catalog. www.aalborg.com +1.845.770.3000 | ||||||||
.jpg){kind=small} | PTFE, PFA, and PCTFE Flow Meter The Model F In Line Flow Meter is made entirely of PTFE, PFA, and PCTFE. It is excellent for high-purity applications or for use with corrosive liquids. Units are available with a standard valve to monitor and control flow with or without a valve to just monitor flow. Design Features
| ||||||||
| |
