Products / Services:
 Click on a category to see this company's product/service line for the chosen category. 
  
 
Advanced Antivibration Components - AACNew Hyde Park, NY
 
E-mailE-mail CompanyComputer and GlobeVisit WebsitePhone
Phone: 516-328-3662
 
* Click on an image to enlarge it in a new window *
 VIBRATION ISOLATORS
 
Advanced Antivibration Components offers a wide selection of Vibration Isolators. To view our complete selection, please visit our website. Thank you.
Get a Quote
 
   
 SPRING MOUNTS
Elliptic Leaf Type
 
LEAVES:
304 Stainless Steel*
 
WASHERS:
Nylon and Stainless Steel
 
DAMPING COMPOUND:
Polymer
 
TEMPERATURE RANGE:
+50°F to +86°F (+10°C to +30°C)
• NATO APPROVED NAVAL "X" MOUNTS
 

Get a Quote
 
   
 SPRING MOUNTS
Damped Type – To 200 lbs.
 
BASE PLATE:
Mild Steel
 
SPRING:
High-Tensile Steel - Phosphated & Dyed Black
 
ISOLATOR:
Knitted Stainless Steel Mesh
 
END CAP:
Cast Light Alloy
 
TEMPERATURE RANGE:
-94°F to +347°F (-70°C to +175°C)
 
APPLICATIONS:
  • MEDIUM-HEAVY INDUSTRIAL EQUIPMENT
  • OPTICAL EQUIPMENT
  • LABORATORY EQUIPMENT
  • CORROSIVE ENVIRONMENT
  • STAINLESS STEEL MESH
  • FOR LOADS OF 60 TO 200 POUNDS (27 TO 90 kgf)

 
CHARACTERISTICS:
Lateral to vertical stiffness ratio approximately 1:1.
Elastic Limit corresponds to a maximum load in
compression of .042 oz. (1.2 g) and radially .007 oz. (0.2 g).
Damping factor c/co .10 to .15
 
MOUNTING:
Must be loaded vertically through its axis.
Get a Quote
 
   
 SPRING MOUNTS
Silicone Gel Type
 
STUDS:
Brass
 
BODY:
Silicone Gel
 
SPRING:
Piano Wire Type B, Nickel Plated
 
TEMPERATURE RANGE:
-40°C to +200°C (-40°F to +392°F)
  • DAMPS LOW FREQUENCY VIBRATIONS
  • VERTICAL VIBRATIONS DAMPED WITHOUT HORIZONTAL DEFLECTION
  • TO BE USED IN COMPRESSION ONLY
Get a Quote
 
   
 STEEL SPRING AND PAD MOUNTS
To 4.4 lbs
 
MOUNTING BASE:
Aluminum Alloy, Anodized
 
RETAINING CAPS:
Aluminum Alloy, Anodized
 
SPRING & CENTER TUBE:
Stainless Steel
 
ISOLATOR:
Knitted Stainless Steel Pads
 
FOR LOADS OF:
.24 to 4.4 Pounds (0.11 to 2 kgf)
 
TEMPERATURE RANGE:
-94°F to +347°F (-70°C to +175°C)
 
APPLICATIONS:
  • LIGHT ELECTRONICS & MECHANICAL EQUIPMENT
  • HIGH FREQUENCY ENVIRONMENTS
  • CORROSIVE ENVIRONMENT
  • STAINLESS STEEL PADS

DYNAMIC CHARACTERISTICS:
Natural frequency = 15 to 25 Hz vertical
= 12 to 20 Hz radial
 
Allowable max. movement on mount = ±.012 (0.3)
Transmissibility between 3:1 and 4:1
 
LOADING LIMITATIONS:
Mechanical resistance is equal to 10 G of continuous acceleration.
Get a Quote
 
   
 STEEL SPRING AND MESH MOUNTS
To 10 lbs.
 
HOUSING:
Aluminum Alloy, Anodized
 
EYELETS:
Brass, Tin Plated
 
ISOLATOR:
Stainless Steel Spring and Mesh
 
FOR LOADS OF:
.5 to 10 Pounds (0.25 to 4.6 kgf)
 
TEMPERATURE RANGE:
-94°F to +347°F (-70°C to +175°C)
 
APPLICATIONS:
  • AIRCRAFT
  • MARINE
  • MOBILE
  • ROTATING MACHINES

  • CORROSIVE ENVIRONMENT
  • STAINLESS STEEL MESH

 
DYNAMIC CHARACERISTICS:
Ratio between transverse and axial stiffness (vertical) approximately 1:2.5
Natural frequency = 7 to 11 Hz vertical and 4.5 to 7 Hz transverse depending on load, for a displacement
input ± .014 (0.35).
Maximum displacement input ± .016 (0.4).
Transmissibility ≤4:1.
Conforms to MIL-E-5400
 
LOADING LIMITATIONS:
Prior to abutting snubber, load corresponding to a continuous acceleration of at least 2 G. Loads corresponding to at least 10 G may be accepted without subsequently affecting the mount performance. Maximum displacement of the suspended unit under limiting loads ± .197 (5).
Get a Quote
 
   
 STEEL MESH MOUNTS
To 1598 lbs.
 
HOUSING:
Machined Casting
Center and Cup Washer are Zinc Plated and Gold Passivated Mild Steel
 
ISOLATOR:
Stainless Steel Mesh
 
FOR LOADS OF:
77 to 1598 Pounds (35 to 725 kgf)
 
TEMPERATURE RANGE:
-94°F to +347°F (-70°C to +175°C)
 
APPLICATIONS:
Primarily developed for heavy-duty applications where severe shock forces are encountered, these mounts are especially recommended for vehicle and marine installations where there are high starting torques or reversals of loads. They are capable of withstanding compression loads as high as ten times the static loads and are used for isolating marine fans, mobile engines, generators, instrument consoles and general machine tools such as lathes, milling machines, slotters, broachers, etc.
  • CORROSIVE ENVIRONMENT
  • STAINLESS STEEL MESH

 
CHARACERISTICS:
Although normally intended to be used in compression, they will accept accidental tensile loads. The mounts should be fixed to the floor for loads in excess of 220 lb. (99.8 kgf) or when working conditions require it. They will accept compressive loads at least five times the static load.
Get a Quote
 
   
 SPRING MOUNTS
Pedestal Type
 
MOUNTING PLATES:
Steel, Zinc Plated
 
SPRINGS:
Spring Steel Wire
 
TEMPERATURE RANGE:
-76°F to +302°F (-60°C to +150°C)
• ALL METAL
Get a Quote
 
   
 CABLE ISOLATORS
3/16" Cable Dia
 
CABLE:
Stainless Steel (MIL-W-83420)
 
RETAINING BARS:
Aluminum Alloy 6061-T6; Iridited (MIL-C-5541)
 
RETAINING CLIPS:
Stainless Steel
  • ISOLATION PROTECTION IN ALL AXES
  • RESISTS CORROSION
  • MAINTENANCE–FREE
Get a Quote
 
   
 CIRCULAR CABLE ISOLATORS
3/32" & 1/8" Cable Dia.
 
CABLE:
Stainless Steel
 
MOUNTING PLATES:
Aluminum
 
TEMPERATURE RANGE:
-65°F to +200°F (-54°C to +93°C)
 
APPLICATIONS:
  • COMPUTERS
  • ELECTRONICS, MEDICAL EQUIPMENT
  • AVIONICS
  • GENERATORS, MOTORS & PUMPS

 
FEATURES:
  • Maintenance-free
  • Long life
  • Corrosion-resistant
  • Absorbs heavy loads with minimum deflection
  • Isolation protection in all axes
  • Compact, low profile
Get a Quote