| | (t).jpg) | Liquid Low Flow Meters
Rheotherm® flow meters for low liquid flow reliably measure low flow rates with unique nonintrusive, no-moving-parts sensor designs. These instruments have been used in numerous applications for more than three decades. They have been used for critical measurements in chemical, aerospace, water/wastewater, and nuclear applications, to name a few of the industries Intek serves.
Flow rates from a few GPM down to 1 gallon/year, in hazardous and non-hazardous locations, can be accurately measured. Visit our web site or contact our sales engineering team to learn more.
| |
| | .jpg) | Hazardous Location Operation
Rheotherm® flow meters and flow switches can be installed in hazardous areas using Intek's proprietary, FM approved intrinsically safe barrier. With the sensor installed in the hazardous location, the electronics and the ISB can be located either in a non-hazardous remote area, or within the hazardous area if installed in a NEMA 7 explosion-proof housing. A purged enclosure may also be used in some areas.
With these options, Rheotherm flow meters and flow switches are suitable for operation in the following types of hazardous locations:
- Class I, Division 1, Groups A, B, C, and D
- Class II, Division 1, Groups E, F, and G
- Class III, Division 1
| |
