Industrial Magnetics, Inc. | Boyne City, MI |
| |||||||||
* Click on an image to enlarge it in a new window * | |||||||||
PowerLift® Magnets PowerLift® Rare Earth Lifting Magnets - Designed for Thick, Non-Flexing Material These compact, yet powerful, Rare Earth lift magnets can be used on flat or round surfaces and contain an internal release on/off device that does not contact or damage the surface of the part being lifted. Permanent magnetic lifts also eliminate the fear of dropping the load being lifted due to power failures.
Lock On & Off Features The new handle on the PowerLift® Rare Earth lift magnet features a positive lock-on and lock-off mechanism that requires the operator to manually switch between the two states. This prevents the handle from being turned only "partially on" and giving the operator a false sense of security that the magnet is holding safely, or from being accidentally bumped to the "off" position, dropping the load pre-maturely. NEW! VERTICAL LIFT ADAPTER Lift Thick, Non-Flexing, Vertically Oriented Material Applications:
Benefits:
The Vertical Lift Adapter(VLA), combined with an IMI PowerLift® magnet, lifts ferrous metal sheets, plates, rounds or billets from horizontal to vertical orientation or vise versa. The VLA is ideal for loading steel plate into vertical storage racks and for lifting plate steel, rounds or billets to machining centers or cutting tables. The Vertical Lift Adapter can be used on various flat steel plates or round shapes and allows the operator to lift loads up to 4 feet wide. The Vertical Lift Adapter also has convenient, built-in forklift brackets to move and handle steel in a horizontal orientation. The Vertical Lift Adapter is currently available for use with the PNL0800 and PNL1600. For additional models, or steel billet lifting applications, please contact our inside sales department at 888.582.0823. To view our complete selection of Lifting Magnets click on the link below. Additional Info: http://www.magnetics.com/products.asp?ProductParent=Lifts | |||||||||
Sheet Handlers Protect workers from cuts, slivers, nicks & burns! Use the Magnetic Sheet Handler for steel sheets, plates, hot or oily parts. Increase productivity No electricity required Handle sheets stacked horizontally or vertically To view our complete selection of Lifting Magnets click on the link below. Additional Info: http://www.magnetics.com/products.asp?ProductParent=Lifts | |||||||||
Transporter® Cylinder Actuated Magnets Our patented Transporter® utilizes a powerful, rare earth permanent magnet to pick and place heavy, non-flexing steel items, such as truck frames, or other rigid parts in automated transfer or manually operated material handling applications. The Transporter® offers increased material handling safety and a significant reduction over vacuum cups in shop air costs. Ideal for applications in the Automotive, Appliance and Office Furniture industries, the Transporter® represents a new generation of tooling technology. Available in many standard and custom configurations to best suit the needs of your application. To view our complete selection of Permanent Magnets click on the link below. Additional Info: http://www.magnetics.com/search.asp | |||||||||
TriggerLift® Hand held lift allows strong grip of parts with an easy to use trigger release.
To view our complete selection of Permanent Magnets click on the link below. Additional Info: http://www.magnetics.com/search.asp | |||||||||
Parts Retrievers Remove steel parts from bins, boxes, kegs, tables or floors.
To view our complete selection of Hand Magnets click on the link below. Additional Info: http://www.magnetics.com/products.asp?ProductParent=Hand%20Tools | |||||||||
Long Reach Retrievers MX3000WAH Lightweight, long reach retriever with a Ceramic magnet at a 45 degree angle. MM06X38 Collapsible, long retriever for narrow areas. Ceramic magnet is 1-3/8" sq. by 6" long. To view our complete selection of Hand Magnets click on the link below. Additional Info: http://www.magnetics.com/products.asp?ProductParent=Hand%20Tools | |||||||||
Flexible Magnetic Strips Flexible magnetic strips are made of a Ferro Magnetic powder mixed with a polymer bonding. These high energy strips resist demagnetization and will not chip, crack or shatter. Mag-Mate's flexible magnetic rubber is magnetized with two or more poles along the length of the face, creating concentrated strength on the face of the magnet.
Flexible Magnets are great for signage and labeling steel shelves, drawers, file cabinets, magnetic white boards, doors, trays, machinery, etc. Use our adhesive backed magnetic strips to stick to your existing paper, cardboard, wood, plastic or metal label or sign and turn them into a magnetic version which will stick to any steel surface. If you already have adhesive labels of your own, our plain back version will suffice. Additional Info: http://www.magnetics.com/product.asp?ProductID=39 | |||||||||
Flexible Magnetic Sheets
Additional Info: http://www.magnetics.com/product.asp?ProductID=40 | |||||||||
Flexible Magnetic Pre-Cut Sheets
Additional Info: http://www.magnetics.com/product.asp?ProductID=41 | |||||||||
Magnetic Grates Magnetic Grate Separators, sometimes called "hopper magnets", deliver ferrous tramp metal separation in bins, chutes, drawers, hoppers and circular enclosures. IMI's Round Style magnetic grates are constructed with one inch diameter magnetic tubes placed on two inch (2") centers in heavy duty 1/8" thick x 2" wide stainless steel framing. The round style magnetic grates are available in 16 standard diameters ranging from 4" to 36" with either Ceramic or Rare Earth magnetic construction. Special sizes are also available. Each round magnetic grate can be equipped with diverters. See tech sheet for styles. IMI's Square Style magnetic grate separators are also constructed with 1" dia. magnetic tubes placed on 2" centers in heavy duty 1/8" thick x 2" wide stainless steel framing. Standard models are available to order online. Request tech sheet or contact IMI for additional ordering options. Additional Info: http://www.magnetics.com/product.asp?ProductID=90 | |||||||||
Dip Tank Magnets This heavy duty Ceramic, filtration magnet retrieves tools, parts, key rings, fishing tackle & more!
Additional Info: http://www.magnetics.com/product.asp?ProductID=25 | |||||||||
Hump Magnet Ideal for ferrous tramp metal separation in gravity systems, IMI Hump Magnet separators are adaptable to either round pipe or rectangular chute transfer lines. The Hump magnet employs two heavy duty diverter-equipped Spout Magnets, which are positioned so that the offset flow of product flowing through the hump is forced into the magnetic fields. The hinged magnets are gasketed and clamped tightly to the hump housing for maximum product and dust containment during processing operations. They also swing open for easy removal of captured tramp metal. Ruggedly constructed from stainless steel with a welded flange mounting system to fit either chute or pipe applications, IMI Hump separators are available in nine standard sizes with Custom sizes available upon request. Additional Info: http://www.magnetics.com/product.asp?ProductID=86 | |||||||||
Heavy Duty Retriever Designed for retrieving broken drill bits from oil and water wells, the Heavy Duty Retriever captures metal objects from any wet or dry area that requires large lifting capacity in a small package. A powerful Rare Earth permanent magnet is encased in a Stainless Steel housing for a long, non-corrosive life. The large lifting lug allows for fast attachment to chains, rope, slings, cable, etc. The Heavy Duty Retriever magnet measures 3" diameter by 5-3/4" high and weights approximately 5 lbs. Additional Info: http://www.magnetics.com/product.asp?ProductID=130 | |||||||||
Granulator Plate Magnet Protect your plastic regrind operation from tramp metal contamination with IMI's powerful Granulator Plate Magnets. These magnets are designed for easy installation in your granulator's feed tray, and are an economical way to prevent tramp metal from damaging your equipment and contaminating your product. Features a stainless steel, all welded construction and low profile design for smooth product flow over the face of the magnet. The plate magnet housing is constructed of stainless steel with stainless steel magnetic poles. Additional Info: http://www.magnetics.com/product.asp?ProductID=85 | |||||||||
Plate Magnets - Exposed Pole Exposed Pole Plate Magnets are designed for below-the-flow applications. The two 400 series (magnetic stainless steel) exposed poles provide added protection from wash-off without impeding the product flow. Exposed Pole models are ideal for low volume chute installations with either Ceramic or Rare Earth magnetic circuits. Magnet Materials for Plate Magnets: Ceramic: Used for small to larger ferrous particle separation such as nails, bolts,washers, etc that can cause damage to processing equipment. Rare Earth: Extremely powerful magnet material used for "fine particle" separation such as metal filings, shavings, metal wear residue, work hardened stainless steel, etc, as well as capturing larger tramp metal. For assistance in selecting the most effective magnet for your application, please contact us. All IMI plate magnets feature performance engineering, rugged, welded stainless and steel construction, and use the finest magnet material available. Additional Info: http://www.magnetics.com/product.asp?ProductID=125 | |||||||||
Plate Magnets - Flush Face Flush Face Plate Magnets are designed for above-the-flow applications. The Flush Face model is available in Ceramic and Rare Earth designs to lift ferrous metal out of the product flow, protecting downstream processing equipment and improving product purity. Magnet Materials for Plate Magnets: Ceramic: Used for small to larger ferrous particle separation such as nails, bolts,washers, etc that can cause damage to processing equipment. Rare Earth: Extremely powerful magnet material used for "fine particle" separation such as metal filings, shavings, metal wear residue, work hardened stainless steel, etc, as well as capturing larger tramp metal. For assistance in selecting the most effective magnet for your application, please contact us. All IMI plate magnets feature performance engineering, rugged, welded stainless and steel construction, and use the finest magnet material available. Additional Info: http://www.magnetics.com/product.asp?ProductID=126 | |||||||||
Plate Magnets - Spout Magnet Spout Plate Magnets feature a diverter to provide maximum tramp metal separation and superior wash-off protection for high volume, below-the-flow applications. The diverter protects collected metal from being washed back into the product flow, while preventing product degradation. Several strengths are available in Ceramic and Rare Earth designs to meet the requirements of difficult applications. Magnet Materials for Plate Magnets: Ceramic: Used for small to larger ferrous particle separation such as nails, bolts, washers, etc that can cause damage to processing equipment. Rare Earth: Extremely powerful magnet material used for "fine particle" separation such as metal filings, shavings, metal wear residue, work hardened stainless steel, etc., as well as capturing larger tramp metal. For assistance in selecting the most effective magnet for your application, please contact us. All IMI plate magnets feature performance engineering, rugged, welded stainless and steel construction, and use the finest magnet material available. Additional Info: http://www.magnetics.com/product.asp?ProductID=127 | |||||||||
Cylindrical Magnet Assemblies These powerful cylindrical magnet assemblies are available in Ceramic, Alnico and Rare earth magnet material with diameters ranging from 1/4" to 2" and with holding values as high as 172 pounds. Rare earth magnets are extremely powerful yet compact. Alnico magnets are ideal for high heat applications and Ceramic magnet assemblies are generally the most economical. The magnetic assemblies below are available to order online, or contact us to order a custom design built specifically for your application. Additional Info: http://www.magnetics.com/product.asp?ProductID=42 | |||||||||
Transporter® LP The Low Profile Transporter® LP magnetically transfers metal blanks, stampings and parts in automated station to station, press-to-press transfer and robotic pick and place systems. Typical applications include stamped parts, tailor welded blanks, body panels and refrigerator door panels.
The Transporter® LP is designed to directly replace vacuum cups with minor tooling and valve adjustments. Powerful Rare Earth magnets positively hold the parts during transfer, greatly reducing the chance of slipping and shifting of your part due to oily coatings. An optional "low-skid" boot is also available to increase grip on parts during transfer. A short burst of shop air pressure is applied in order to release parts. To pick-up or grip parts, the air pressure must be exhausted to the atmosphere. De-stacking (Option DS): The de-stacking option is required for applications de-stacking metal that is thinner than .0478" (18 ga) with the TPLP30 model. The de-stack option features a special magnetic circuit that is designed to de-stack sheets as thin as .030" (22ga). The optional low-skid boot is required for certain applications. Double Acting (Option DA): Features O-Ring seals & extra air inlet that allow a short blast of air to engage or disengage the grip function. The double acting option is only available on the TPL30 & TPLP50 magnets. Operates at low pressure (20 psi), allows use of 1/4" Lines & can run up to 16 magnets from 1 valve 3/8 BSPP Fitting (Option BS): 3/8 British Standard Pipe Parallel Thread, available on TPLP30 models only. Additional Info: http://www.magnetics.com/product.asp?ProductID=3 | |||||||||
RapidFire Retriever® Versatile, swivel-head design allows various pickup positions on the part, and the long handle enables the operator to safely grab pieces that would normally be out of arm's reach. While lift capacity will vary depending on the size and thickness of parts, the magnetic RapidFire Retriever® is capable of handling up to 35 lbs. and exceeds the lift capacity of most suction cups.
Additional Info: http://www.magnetics.com/product.asp?ProductID=13 | |||||||||
Alnico Alnico magnet material is an alloy made up of aluminum, nickel, cobalt and copper, with a rough cast surface which can be ground to close dimensions and to a bright metallic finish. Alnico is electrically conducted, can be E.D.M.'d to form holes and shapes, and can be plated. Alnico is available in a wide variety of shapes and sizes and is typically oriented magnetically through its length. Ideal for high heat applications, alnico can withstand operating temperatures up to 800OF. Raw magnet material is available in many different types, shapes, sizes and strengths. When selecting magnetic material to perform a given task, certain specifications need to be considered: dimensions, direction of the materials, magnetic orientation, tolerances, finish, strength, and the type of raw magnetic material desired, such as Rare Earth magnets, Ceramic magnets or even Flexible magnetic rubber. Mag-Mate raw magnet material meets Magnetic Materials Producers Association (MMPA) standards for physical quality and magnetic properties. Additional Info: http://www.magnetics.com/product.asp?ProductID=36 | |||||||||
Ceramic Ceramic magnet material is a nonmetallic compound of iron oxide, strontium ferrite and small quantities of other metal oxides. The compound is calcined wet ball milled to a fine particle size, binders are added, then the mix is compacted in a press. The compacted shapes are fired at high temperatures in kilns to a closely controlled temperature cycle. Upon cooling, the parts are diamond sawed and diamond wheel ground to specifications. Low cost, light weight and fairly high energy, Ceramic is a hard, brittle, nonconductive material. It is difficult to grind and cannot be E.M.D.'d, machined or drilled by normal methods. Ceramic is dense black or blue-black in color. It has a thin cross section, is mostly available in slabs or rings and is usually oriented magnetically through its thickness. Ceramic magnet material performs best when temperatures do not exceed 350OF. Raw magnet material is available in many different types, shapes, sizes and strengths. When selecting magnetic material to perform a given task, certain specifications need to be considered: dimensions, direction of the materials, magnetic orientation, tolerances, finish, strength, and the type of raw magnetic material desired, such as Rare Earth magnets, Ceramic magnets or even Flexible magnetic rubber. Mag-Mate raw magnet material meets Magnetic Materials Producers Association (MMPA) standards for physical quality and magnetic properties. Additional Info: http://www.magnetics.com/product.asp?ProductID=37 | |||||||||
Rare Earth Due to their tremendously high energy level, Rare Earth magnets are ideal for miniaturized applications. They offer high resistance to demagnetization and are recommended for applications with temperature ranges under 200ºF. Raw Rare Earth magnets have a dull metallic appearance and tend to be very brittle. They can be ground, but caution must be exercised not to crush the material. Be aware of possible fire from the dust particles produced from grinding or cutting Rare Earth magnet materials. Raw magnet material is available in many different types, shapes, sizes and strengths. When selecting magnetic material to perform a given task, certain specifications need to be considered: dimensions, direction of the materials, magnetic orientation, tolerances, finish, strength, and the type of raw magnetic material desired, such as Rare Earth magnets, Ceramic magnets or even Flexible magnetic rubber. Mag-Mate raw magnet material meets Magnetic Materials Producers Association (MMPA) standards for physical quality and magnetic properties. Additional Info: http://www.magnetics.com/product.asp?ProductID=38 | |||||||||
Horseshoe Type Magnet Assemblies Ceramic magnet (except LP2100R is Rare Earth) placed in a stainless steel channel and covered with a stainless steel face. Use 1/4"-20 (m6) bolt or screws for mounting this non-corrosive 2-pole assembly. Maximum temperature 300OF (148OC). Rare Earth maximum temperature is 200OF (94OC). To view our complete selection of Horseshoe Type Magnet Assemblies, please click on the link below. Additional Info: http://www.magnetics.com/product.asp?ProductID=48 | |||||||||
Inspection Probe IMI's PROBE magnetic inspection tools allow quality assurance people to inspect incoming or outgoing material/batches/shipments for ferrous metal contamination. They are used to determine if ferrous particles exist in non-ferrous material. This extremely powerful Rare Earth magnetic tool captures iron particles in products such as; plastic resins, wood fibers, crumb rubber, etc. The long, 46" handle on the magnetic probe has a black, ball grip and allows you to reach deep into containers for best batch testing. Additional Info: http://www.magnetics.com/product.asp?ProductID=87 | |||||||||
Mag-Pry™ Mag-Pry™ by Fit Up Gear™ Strong, easy to use, On/Off magnetic pry bar, featuring Magswitch® technology, for material leveling and alignment also known as mismatch or high / low. Perfect for all plate and seam work, under foot, on vertical surfaces, even overhead. Features Eliminates need for welded tabs Rapid and easy plate matching for seamless welds Non marring, On/Off Rare Earth Magnet with 1,100 lbs breakaway force and locking T-handle for safety Easy 180 degree On/Off actuation with no electricity needed Up to 100 times faster than traditional methods saving you time and money, pays for itself in days Additional Info: http://www.magnetics.com/product.asp?ProductID=139 | |||||||||
Exposed Pole Tube Magnet (EP Tube) Our Exposed Pole Tube magnet (EP Tube), is designed for use in pneumatic line systems. It can be used ahead of processing equipment and bulk load out to assure product purity and protect machinery from tramp metal damage. Ideal for use in dilute or dense phase systems, typical Exposed Pole Tube magnet applications include the processing of pelletized foods, feed or grain where degradation is a concern, fibrous products, or products that have a higher moisture content with a tendency to clog or congeal. Additional Info: http://www.magnetics.com/product.asp?ProductID=83 | |||||||||
Magnetic Welding Squares IMI's Welding Squares are available in either Standard(always on) or On/Off configurations. STANDARD WELDING SQUARES: Magnetic Welding Squares are ideal for welders that need fast set-up and accurate holding of sheet stock or tubing. Ferrous stock can be securely held at angles of 30°, 45°, 60°, 75°, 90° and 180°. Mounting holes are provided for fixturing squares into jigs.
ON/OFF MAGNETIC WELDING SQUARES & FIXTURE MAGNETS: The switchable, On/Off Rare Earth MagSquares, featuring MagSwitch® technology, are extremely powerful magnetic welding squares that allow you to turn the magnet "on" or "off" by a simple twist of the handle. This alleviates the problem of the magnet sticking to surfaces you may not want it to, allows for fast, exact placement of the square and prevents metal fines from collecting on the magnet face. With fast magnetic work-holding on multiple sides of the MagSquare, you can eliminate the need for tedious & time consuming clamping. Versatile MagSquares can be used on flat or round, steel or iron surfaces and have pre-tapped holes on all sides for mounting. Additional Info: http://www.magnetics.com/product.asp?ProductID=18 | |||||||||
Magnetic Welding Grounds IMI's Welding Grounds are available in either Standard (always on) or On/Off configurations. STANDARD WELDING GROUNDS: These powerful magnetic welding grounds have strong gripping power and magnetically attach to your ferrous metal work surface. Simply secure ground cable over the stud to assure excellent electrical ground. Spring loaded stud keeps constant ground contact.
ON/OFF MAGNETIC WELDING GROUNDS: These switchable, ON/OFF, Rare Earth Magnetic Welding Grounds with MagSwitch® technology, let welders set up, weld and move on to the next job in a flash. Simply place the magnetic welding ground on a steel work surface, turn it on and start welding. Makes welding quicker and easier than ever before. Additional Info: http://www.magnetics.com/product.asp?ProductID=20 | |||||||||
On/Off Magnetic Hooks ON/OFF MAGNETIC HOOKS The switchable ON/OFF Rare Earth Magnetic hanging hooks, featuring Magswitch® technology, are perfect for temporary holding of lines, hoses, lights, tools and more. For use around the job site or shop. Quickly secure and hold just about anything, anywhere. Attaches to flat or round surfaces with ease. Additional Info: http://www.magnetics.com/product.asp?ProductID=121 | |||||||||
Magnetic Welding Angles IMI's Welding Angles are available in either Standard (always on) or On/Off models. ON/OFF 90° WELDING ANGLES: Unlike a standard magnetic welding angle, these switchable Rare Earth welding angles can be turned on and off! The ON/OFF 90° Rare Earth Magnetic Welding Angle is reversible for inside or outside angles and holds flat against pipe. Simply place it on a work surface, turn it on and start welding. Versatile design with pre-drilled holes allows for quick adjustment or addition of magnetic bases. ON/OFF ADJUSTABLE WELDING ANGLES: The unique design of our Adjustable Welding Angles has magnetic bases that rotate for virtually unlimited welding angles and is reversible for inside or outside holds - even against pipe. So not only will the magnet stay clean and free of particle build up when not in use (no wiping!), but it also lets you position the welding angle to your piece without fighting a magnetic field and marring it's surface. Once you've got your angle set, simply rotate the handles to turn the magnets on. This lets welders set up, weld and move on to the next job in a flash. ON/OFF PIVOTING WELDING ANGLE: Quickly and easily set up and hold steel in angles ranging from 22° to 270° with an adjustable, locking handle and marked degree indicators every 45° for accuracy. On/Off Pivoting Welding Angle offers versatile, work-holding ability on three sides of each magnet with a 200lb. holding value and accommodates flat or round steel. STANDARD 90° WELDING ANGLE: Our standard, 90° welding angle has powerful permanent magnets that hold steel securely in place for welding. Versatile design allows steel placement on either inside angle for interior welds or outside angle for exterior welds and has mounting holes for easy fixturing. Additional Info: http://www.magnetics.com/product.asp?ProductID=118 |