Industrial Magnetics, Inc.Boyne City, MI
 
E-mailE-mail CompanyComputer and GlobeVisit WebsitePhone
Phone: 231-582-3100
Fax: 231.582.0622
 
* Click on an image to enlarge it in a new window *
 Magnetic Sheet Lifters
 
The Magnetic Sheet/Plate Lifter de-stacks steel sheets from pallets, racks and more. The unique design of this permanent magnetic lifting system allows one person to safely and effectively move and load sheets onto cutting tables, shear beds and other fabrication equipment. The Magnetic Sheet/Plate Lifter features a series of adjustable position permanent magnetic lifting heads to lift a wide variety of sheet lengths and widths. These permanent magnets require a simple burst of shop air to release the sheets/plates.
 
Applications
  • Loading cutting tables, shears, welding cells, etc
  • Moving steel sheets or plates from pallets or racks to a work station

Benefits
  • Reliability of a permanent magnet with the On/Off capabilities of an electromagnet
  • Only requires shop air to attach or release the magnet, not during the lift
  • Failsafe design (No battery backup required)
  • Adjustable magnet positions lift a wide variety of sheet lengths and widths
  • Won't drop load during power outage or system air loss
  • No heat build-up

Operation Requirements
  • Minimum sheet size: 4' x 6'
  • Maximum sheet size: 5' x 12'
  • Minimum shop air pressure of input of 80 psi

 
Get a Quote
 
   
 Magnetic Tube Lifters
 
IMI's new Magnetic Tube Lifter is designed to assist in stacking, destacking, loading and unloading for a variety of tube and pipe applications. This is a permanent magnet that requires a simple burst of shop air to release the row of tube or pipe. In the result of a loss of shop air, the Tube Lifter is designed to remain in a "failure safe" mode, without the need for a battery backup system; simply put, the magnet will not drop the tube or pipe, ensuring safer working conditions. The Tube Lifter is ideal for hydroforming, roll-forming, packing, cutting or tube and pipe fabrication applications.
 
Benefits
  • Works on round, square & custom shaped tubing
  • Operates on shop air from 60 to 80 psi
  • Destacks nested tubing
  • Reduces cycle times in many tube handling applications
  • Failsafe design (No battery backup required)

Features
  • Powerful, rare earth magnetic circuit
  • Stainless steel housing
  • 100mm air cylinders with 3/8" NPT ports
  • Bearing guided cylinder shafts
  • Unique magnetic circuit prevents tubes from rolling or shifting during transport

Options
  • Available with custom cylinders, magnetic circuits and pick-up points
  • Spreader system for mounting magnets
  • Protective magnet covers for polished, plated & painted tubing
Get a Quote
 
   
 IMI's Magnetic Transfer Conveyors are ideal for automating metal sheet handling in a variety of industries, such as Automotive, OfficeFurniture and Appliance.
 
Common applications are stacking, destacking, press feeding and moving parts from one place to another. Magnetic Transfer Conveyors are often used to eliminate laborious hand feeding. Several things are taken into consideration when designing a transfer conveyor for an application. Maximum sheet size, sheet thickness & weight, surface conditions, length and direction of transfers, and type of operation all affect product recommendations.
Get a Quote
 
   
 Automation-Can Conveying
 
IMI Magnetic Conveying Rail utilizes powerful permanent magnets to hold ferrous parts such as steel containers, composite cans, cans and lids, firmly in place during conveying.
 
The magnetic rail is installed as a stationary component and allows the conveyor belting to ride over the top of it. The strong magnetic field holds parts tightly to the belt surface, even during vertical, inclined or horizontal conveying. Slipping or rolling of items is eliminated, and conveying speeds are able to increase.
 
Additional benefits include better utilization of space within a facility, noise reduction, correct part orientation, and on-time material flow.
 
IMI has a full line of quality magnetic components available in a wide variety of sizes and strengths to meet your application needs.
Get a Quote
 
   
 Low Profile Conveyors
 
Low Profile conveyors from Industrial Magnetics, Inc. are available in magnetic or non-magnetic models in a variety of sizes to meet your application. The low overall clearance design requires minimal space for installation, while allowing for fast belt replacement. In addition, the magnetic unit circuits are the same width as the belt to hold parts firmly from edge to edge.
 
Our low profile magnetic conveyors feature oil and abrasion resistant urethane, endless belts and crowned take up and drive pulleys. Gang or individual drive options are available.
 
Low Profile Magnetic Conveyor Specifications
  • Anodized aluminum, precision machined frame
  • 3/8" machined aluminum slider bed
  • Precision crowned aluminum pulleys
  • Double-sealed metric style pulley bearings for long term durability and superior performance
  • T-slot aluminum extrusion on each side for easy accessory mounting and adjustments
  • Choose from a wide variety of standard smooth surface and cleated belts
  • The LPC series conveyors have maximum load-carrying capacity of 60 lbs.
  • Operating load capacity for the LPC conveyors is dependent of the conveyor size, incline, drive package and other specific factors
Get a Quote
 
   
 PowerLift® Magnets
 
PowerLift® Rare Earth Lifting Magnets - Designed for Thick, Non-Flexing Material
 
These compact, yet powerful, Rare Earth lift magnets can be used on flat or round surfaces and contain an internal release on/off device that does not contact or damage the surface of the part being lifted. Permanent magnetic lifts also eliminate the fear of dropping the load being lifted due to power failures.
  • ON/OFF Rare Earth design
  • Lifts flat or round loads
  • Easy internal manual release does not contact the load
  • Heat resistant up to 180°F (82°C)
  • CONFORMS TO ASME B30.20 STANDARDS

Lock On & Off Features
The new handle on the PowerLift® Rare Earth lift magnet features a positive lock-on and lock-off mechanism that requires the operator to manually switch between the two states. This prevents the handle from being turned only "partially on" and giving the operator a false sense of security that the magnet is holding safely, or from being accidentally bumped to the "off" position, dropping the load pre-maturely.
 
NEW! VERTICAL LIFT ADAPTER
Lift Thick, Non-Flexing, Vertically Oriented Material
 
Applications:
  • Load steel plate into vertical storage racks
  • Lift steel plate from vertical storage racks to horizontal machining centers or cutting tables
  • Lift steel plate, rounds or billets into place for equipment/machinery manufacturing.

Benefits:
  • One lifter for both horizontal and vertical sheet or steel part handling
  • Reduce employee injury - Eliminate improper use of slings or chains to lift sheet metal or steel parts vertically
  • Increase production time
  • No electricity required

The Vertical Lift Adapter(VLA), combined with an IMI PowerLift® magnet, lifts ferrous metal sheets, plates, rounds or billets from horizontal to vertical orientation or vise versa. The VLA is ideal for loading steel plate into vertical storage racks and for lifting plate steel, rounds or billets to machining centers or cutting tables.
 
The Vertical Lift Adapter can be used on various flat steel plates or round shapes and allows the operator to lift loads up to 4 feet wide. The Vertical Lift Adapter also has convenient, built-in forklift brackets to move and handle steel in a horizontal orientation.
 
The Vertical Lift Adapter is currently available for use with the PNL0800 and PNL1600. For additional models, or steel billet lifting applications, please contact our inside sales department at 888.582.0823.
 
Get a Quote
 
   
 Creative Lift® Magnets
 
Creative Lift® Lifting Magnets - Designed for Thick, Non-Flexing Material
  • Creative Lift permanent lift magnets are ideal for handling steel plates, die castings, forgings, etc. They eliminate the need for clamping devices, slings or chains. One person can perform operations previously calling for two or more people.
  • Non-marring Roller Cam Release (Patent: 6,471,273)
  • Less torque required to release part
  • Lift capacity clearly stated on magnet
  • "Jack Screw" Secondary Release
  • Durable stainless steel casing
  • Use only on thick, non-flexing ferrous items
  • 3:1 Design Factor
  • Made In The USA
  • CONFORMS TO ASME B30.20 STANDARDS

 
Get a Quote
 
   
 Sheet Handlers
 
Protect workers from cuts, slivers, nicks & burns! Use the Magnetic Sheet Handler for steel sheets, plates, hot or oily parts.
Increase productivity
No electricity required
Handle sheets stacked horizontally or vertically
Get a Quote
 
   
 Round Electromagnetic Lift
 
Round Electro Lifting Magnets(RELM) provide concentrated holding power and a deep reaching magnetic field to lift thick, ferrous items. These electromagnetic lifts are an extremely valuable material handling tool. The RELM's durable construction makes them suitable for working in most environments handling thick, non-flexing items such as, steel plates, billets, die castings, forgings and more.
 
Designed for plug-in use (no separate power supply required), the control switch for the "on, off & release" functions of the magnet are mounted on the top of the unit. When compared to our competitors electro lifting magnets, IMI's RELM series of lift magnets offers lower wattage requirements, higher lifting capacities and a lower unit weight.
 
Note: RELM's are not intended to be used as scrap handling magnets. Picking up several pieces of steel at once is not recommend and may result in serious injury or property damage. You must have 100% coverage on a FLAT SURFACE to operate the magnet.
 
Wall plug not included, recommend twist lock style plug
Get a Quote
 
   
 Battery Lift
 
The convenience of an Electro Lift Magnet without the cord....Battery Lift Magnets make loading and unloading of thick, non-flexing ferrous parts simple and fast!
 
Battery lift magnets (BLM) operate on a self-contained automotive type battery (not included), which results in maximum convenience, portability, versatility and dependability. Since there is no need for external power cords, this lift magnet is ideal for remote locations and can be used with forklift type transports or lift cranes that do not have means of power.
 
BLM's come complete with built-in chargers and a visible power gauge that shows when the magnet needs charging. This simple lift magnet does not have fancy lights, bells or whistles that can malfunction and cause a dangerous lifting situation.
 
WARNING: BLM's are NOT intended to be used as scrap handling magnets. Picking up several pieces of steel at once is not recommended and may result in serious injury or property damage. You must have 100% coverage on a FLAT SURFACE to operate the magnet.
Get a Quote
 
   
 Air Actuated PowerLift® Magnets
 
These Air-Actuated PowerLift® Magnets are a perfect solution for systems lifting large, thick, steel plates or any common PowerLift application where remote release or the simultaneous release of a number of magnets on a spreader system is required.
 
The magnet's air actuator turns the magnet on and off, allowing all the safety of a permanent magnet that will not drop the load during a power or air loss.
 
Air Actuated PowerLifts can be used by themselves or in larger systems that can be customized to fit your needs.
 
Specifications:
80-100 psi(clean, dry air)
4 way, 2 position with CV > or = 1 (CV = measurement of airflow through a valve)
Get a Quote
 
   
 Vertical Lift Adapter
 
DESIGNED FOR THICK, NON-FLEXING MATERIAL.
 
The Vertical Lift Adapter(VLA), combined with an IMI PowerLift® magnet, lifts ferrous metal sheets, plates, rounds and billets from horizontal to vertical orientation or vice versa. The VLA is ideal for loading steel plate into vertical storage racks and for lifting plate steel, rounds or billets to machining centers or cutting tables.
 
The Vertical Lift Adapter can be used on various flat steel plates or round shapes and allows the operator to lift loads up to 4 feet wide. The Vertical Lift Adapter also has convenient, built-in forklift brackets to move and handle steel in a horizontal orientation.
 
The Vertical Lift Adapter is currently available for use with the PNL0800 and PNL1600. For additional models, or steel billet lifting applications, please contact our inside sales department at 800.582.0822.
 
Applications:
  • Load steel plate into vertical storage racks
  • Lift steel plate from vertical storage racks to horizontal machining centers or cutting tables
  • Lift steel plate, rounds or billets into place for equipment/machinery manufacturing.

Benefits:
  • One lifter for both horizontal and vertical sheet or part handling
  • Reduce employee injury - Eliminate improper use of slings or chains to lift sheet metal or steel parts vertically
  • Increase production time
  • No electricity required
Get a Quote
 
   
 BasicLift™ Magnet
 
BasicLift™ - Permanent Ceramic Lift Magnets for Flat Steel Applications
 
IMI's new BasicLift™ Magnet is a powerful, no frills permanent ceramic lift magnet perfect for basic, flat steel lifting applications.  Featuring a lightweight and durable Stainless Steel design, the BasicLift has a full width cam to release the magnet from the steel surface and a tall lift lug for easy use with crane hooks and slings.
 
The BasicLift offers a good value for your dollar with strong lifting capacity and basic lifting features.
Full width cam release
Large lift lug
Light weight Design
Durable Stainless Steel casing
Heat resistant up to 300°F (148°C)
2:1 Design Factor
Made In USA
 
Get a Quote
 
   
 VersaLift™ Magnets
 
VersaLift™ Lifting Magnets with Test Mode, Horizontal & Vertical Lifting Capability and RFID Chip
 
Compact and powerful Rare Earth lift magnet for use on flat or round surfaces. Contains an internal ON/OFF release device that does not contact or damage the surface of the part. More features than other lifts and manufactured in the USA (USA M.A.D.E.™).
  • Rare Earth Magnet with a Locking On/Off handle & Test load feature
  • Supports custom pole shoes
  • Supports custom pole shoes
  • Heat resistant up to 200°F (94°C)
  • Stationary Lift Lug(s)
  • Vertical Lift Capability using the optional Lift Lug attachment
  • RFID tagged
  • 3:1 Design Factor
  • CONFORMS TO ASME B30.20 STANDARDS

Test Load Feature
To operate Test Feature, pull spring loaded handle out and rotate it to the "TEST" position. Lift load approximately 2-3" to verify the magnet has the capacity to lift your load. Once verified, place load back down and turn the handle to the "ON" position. Never complete entire lift operation in "TEST" position.
Get a Quote
 
   
 DynamicLift™ Remote Operated Magnet
 
The remote operated DynamicLift™ permanent lift magnet, featuring Magswitch® technology, can be turned "on" or "off" using a remote control, without the need of air or electricity! Not only does this give the operator freedom from electrical cords and air hoses, but also opens up a whole new range of lifting possibilities where accessibility to the magnet was cumbersome or impossible to reach, such as lifting above or below arm's length, into deep channels, loading or unloading CNC/cutting tables and operation from inside the forklift.
 
This compact, yet powerful, Rare Earth lift magnet contains an internal on/off release device that does not contact or damage the surface of the part being lifted. Permanent magnetic lifts also eliminate the fear of dropping the load being lifted due to power failures.
  • Remote Operated, locking, On/Off Rare Earth permanent magnet will stay "on" if battery loses power
  • Built in safety - a load sensor and a 3-button power off sequence prevent accidental release while under load
  • Indicator lights for magnet operational state and battery strength
  • Includes two, 12 volt rechargeable, Lithium-ion batteries(200 cycles per charge) and charger
  • Secondary manual release in case of battery failure
  • 3:1 Design Factor
  • Heat resistant up to 180°F (82°C)
  • CONFORMS TO ASME B30.20 STANDARDS
Get a Quote
 
   
 DynamicLift™ Magnet
 
These lightweight and powerful Rare Earth permanent lift magnets, featuring Magswitch® technology, can be used on flat or round surfaces and contain an internal release On/Off device that does not contact or damage the surface of the part being lifted. DynamicLifts™ have superior holding on thin gauge ferrous metals to comparable Rare Earth lift magnets.
  • On/Off Rare Earth design
  • Easier actuation and Superior holding on material from 1/4" to 1" in thickness
  • Lifts flat or round loads
  • Heat resistant up to 180°F (82°C)
  • Handle locks in "On" position
  • 3:1 Design Factor
  • CONFORMS TO ASME B30.20 STANDARDS
Get a Quote
 
   
 Valve Box Lifter
 
Stop bending over to lift!
 
This sturdy, yet lightweight permanent magnetic retriever is capable of lifting up to 50 lbs. and reduces back strain and finger & toe injuries by ergonomically lifting and moving cast iron utility covers or non-flexing ferrous metals flats and rounds.
 
The deep reach magnetic field penetrates even textured surfaces and features an easy to use on/off locking handle for safety and precise positioning of parts. Features MagSwitch® technology and rated for small cast iron covers weighing less than 50 lbs.
Get a Quote
 
   
 Permanent Magnetic Sheet Fanners
 
Our standard permanent and electromagnetic Sheet Fanners and Separators are designed to separate steel sheet stock.
 
As sheets are placed against the sheet fanner, the powerful magnetic field automatically forces the sheets apart and separates them from one another. Manually prying apart sticky, oily sheets is no longer necessary and die damaging double blanking problems are eliminated.
 
The flexible mounting design gives you more options to match your application needs. Use the handle and base plate for portable applications or use the tapped holes to bolt the fanner to your equipment or tooling.
 
Note: Choose a fanner with a height 2-3 inches taller than your maximum stack height.
 
Typical Magnetic Sheet Separator Installations: For best results, locate the magnetic fanner at the corner(s) of large sheets and in the center of the width of length on smaller sheets. Fanners placed opposite each other on small sheets will actually float the sheet.
Get a Quote
 
   
 Drum Separator
 
IMI's Magnetic Drum Separators provide ferrous metal removal from dry, bulk products in free-flowing processing systems.
 
Due to the nature of their design, magnetic drum separators are continuously self-cleaning units, and can be provided as the drum only or as a complete assembly with the housing and drive included.
 
Material to be processed enters the top of the magnetic drum separator and flows across the surface of the drum. As the drum shell rotates around the stationary magnetic field, all non-ferrous product, which is unaffected by the magnet, falls free from the drum into the cleaned material flow. Any ferrous tramp metal is captured by the magnetic field and held on the drum's surface. As the drum rotates, the metal is carried past the diverter and released outside of the magnetic field.
Get a Quote
 
   
 Extractor & Split-Flow Magnet
 
The Extractor Magnets are designed for ferrous metal separation in high volume dry processing applications. These continuous operation, high performance separators feature powerful parallel permanent magnets to capture ferrous tramp metal from direct material flow.
 
As material enters through the Extractor's inlet, it passes over a diverter which angles the product flow towards the magnets. Ferrous metal that is mixed in with the product flow is then captured and held by the powerful magnetic field.
 
Standard models are equipped with a EZ-clean stripper drawer to easily remove collected metal from the housing. Also available is an air-actuated self cleaning unit for automated or remote cleaning.
 
The Split-Flow Magnet provides excellent separation for free-falling or choke flows in vertical chute applications.
 
As a product enters the Split Flow magnetic housing, a center wedge magnet splits the flow and diverts the streams towards two extra high intensity parallel magnets. These three magnetic contact points offer excellent attraction and holding power.
 
The housing is constructed of all welded stainless steel for a long, noncorrosive life and is available in both EZ-Clean and Self-Cleaning models.
Get a Quote
 
   
 Hump Magnet
 
Ideal for ferrous tramp metal separation in gravity systems, IMI Hump Magnet separators are adaptable to either round pipe or rectangular chute transfer lines.
 
The Hump magnet employs two heavy duty diverter-equipped Spout Magnets, which are positioned so that the offset flow of product flowing through the hump is forced into the magnetic fields. The hinged magnets are gasketed and clamped tightly to the hump housing for maximum product and dust containment during processing operations. They also swing open for easy removal of captured tramp metal.
 
Ruggedly constructed from stainless steel with a welded flange mounting system to fit either chute or pipe applications, IMI Hump separators are available in nine standard sizes with Custom sizes available upon request.
Get a Quote
 
   
 Magnetic Grates
 
Magnetic Grate Separators, sometimes called "hopper magnets", deliver ferrous tramp metal separation in bins, chutes, drawers, hoppers and circular enclosures.
 
IMI's Round Style magnetic grates are constructed with one inch diameter magnetic tubes placed on two inch (2") centers in heavy duty 1/8" thick x 2" wide stainless steel framing. The round style magnetic grates are available in 16 standard diameters ranging from 4" to 36" with either Ceramic or Rare Earth magnetic construction. Special sizes are also available. Each round magnetic grate can be equipped with diverters. See tech sheet for styles.
 
IMI's Square Style magnetic grate separators are also constructed with 1" dia. magnetic tubes placed on 2" centers in heavy duty 1/8" thick x 2" wide stainless steel framing. Standard models are available to order online. Request tech sheet or contact IMI for additional ordering options.
Get a Quote
 
   
 Electromagnetic Sheet Fanners
 
Electromagnetic Sheet Fanners eliminate die-damaging, double-blanking problems in automated sheet handling operations. A powerful electromagnetic field automatically separates the sheets. As fast as the top sheet is removed, the next sheet instantly moves up.
 
The on/off capability of the Electromagnetic Sheet Fanners provide operator safety during steel blank stacking and un-banding. This on/off control makes cleaning around magnets easier when sheets are not fanned. For automated presses, the electromagnetic fanners are controlled to operate simultaneously with other destacking equipment.
 
Electromagnetic Sheet Fanners require conversion from AC to DC voltage. IMI power supplies are designed to properly convert voltage and provide for operation of single or multiple fanners. IMI power supplies (see Tech Sheet AG-09A) can be equipped with a variable output to adjust the magnetic strength to handle a variety of metal thicknesses.
Get a Quote
 
   
 Magnetic PinFanners™
 
Our Magnetic PinFanners™ are designed to separate stacks of steel sheets or blanks on "Hex", "Round" or "T-Slot" pallets. These fanners have dual functionality; they act as guides for aligning parts as they come off the blanking press and also as magnetic sheet fanners that fan or separate multiple sized or shaped blanks for the manual or automatic loading of a press.
 
Multiple magnet positions ensure direct contact with the blank for maximum fanning ability, and since they are mounted directly to the pallet, there's less down time and maintenance on the line.
  • PinFanners™ function as both pallet pins and sheet fanners
  • Magnetic circuit rotates 180º internally to suppress the fanning action
  • Pallet mounted fanners require less maintenance time on the line
  • Assured contact with blank to maximize fanner performance
  • Works with multiple sizes and shapes of blanks
  • Powerful, Rare Earth permanent magnetic circuit
  • Standard "Hex Pin", "Round Pin" or "T-Slot" mounting available
  • Offset mounting for optimal pin to stack positioning

Note: PinFanners™ must be used in pairs. Each part number below includes 2 pin fanners, one of each polarity (North & South pole).
Get a Quote
 
   
 Magnetic SheetSeeker®
 
IMI's new lightweight SheetSeeker® fanner is a breakthrough in magnetic sheet separation technology!
 
First, the permanent magnetic circuit is lifted and locked into place for introduction to a stack of steel sheets. Then, once the materials are in place, the sliding magnet is unlocked and automatically centers on the top of the stack and fans the sheet stock. As each sheet is lifted off the stack, the magnet indexes down automatically and will fan to the bottom of the stack.
 
Features & Benefits
  • Features a powerful rare-earth, automatic indexing, permanent magnetic circuit
  • Up to 60% lighter than standard sheet fanners with the same strength!
  • Durable stainless steel construction
  • Light-weight design and convenient carry handle allows for easy transport
  • Custom designs and options available upon request
Get a Quote
 
   
 Air Cylinder Sheet Fanners
 
Air Actuated Sheet Fanners have an air release system that pulls the magnet inside back away from the face of the fanner, This allows you to easily and safely remove the fanner from the
stack.
  • Reduce costs & increase safety for destacking steet sheet stock
  • A powerful, Rare Earth magnetic field automatically separates sheets
  • As the top sheet is removed, the next sheet instantly fans up
  • Assists prying apart sticky, oily, pre-finished or polished sheets
  • Eliminates die-damaging double blanking in automated operations
  • ON/OFF of an electromagnet with the benefit of a permanent magnet
  • Allows for mid-stack change over

Permanent Magnetic Fanners handle steel sheets of almost any length, width or shape. The sheets near the top of the stack seperate instantly from a 3/4" to 1-1/2" gap, depending on sheet thickness and size.
Get a Quote
 
   
 Air Knife Fanners
 
Permanent Magnet Sheet Fanners with Air Knives allow for ferrous and non-ferrous sheets to be separated in stacking/destacking applications. While the magnet force will work with all ferrous metals, the air knives separate all non-ferrous metal by pushing air in between the sheets causing them to rise up from one another.
  • Reduce costs & increase safety for destacking ferrous and non-ferrous sheets
  • A magnetic field automatically separates ferrous sheets
  • Powerful air knives automatically separate non-ferrous sheets
  • As the top sheet is removed, the next sheet instantly fans up
  • Assists prying apart sticky, oily, pre-finished or polished sheets
  • Eliminates die-damaging double blanking in automated operations

Permanent Magnetic Fanners handle steel sheets of almost any length, width or shape. The sheets near the top of the stack separate instantly.
Get a Quote
 
   
 Air Spring Sheet Fanners
 
Air Spring Fanners have an air spring system that pushes the magnet inside toward the face of the fanner when air pressure is present. When the air pressure is turned off or disconnected the air spring will defl ate and the magnet will move away from the face of the fanner creating air gap that in essence turns the magnet off. This removes the risk of having metal accidently attracted to the fanner during transportation or stack changeovers.
  • Reduce costs & increase safety for destacking
  • A Powerful, Rare Earth, magnetic field automatically separates ferrous sheets
  • As the top sheet is removed, the next sheet instantly fans up
  • Assists prying apart sticky, oily, pre-finished or polished sheets
  • On/Off capability helps prevent injury when introducing new materials to the fanner
  • "Fail-Safe" mode automatically returns the magnet to the "Off" position with loss of air pressure
  • Durable stainless steel welded cover construction
  • Fans from 30 gauge sheets to 3/16" plate
Get a Quote