 | Products / Services: |  |
| Click on a category to see this company's product/service line for the chosen category. | ||
 |  |
| Jet Edge | St. Michael, MN | |
| |||||||||
| * Click on an image to enlarge it in a new window * | |||||||||
.jpg) | XP90-50 Waterjet Intensifier Pump: High velocity stream of ultra high pressure water The XP90-50 X-Stream Waterjet Pump is backed by nearly 10 years of extensive research and development in hyper-pressure technology. Its fittings and tubings are rated for 100,000 psi. This pump supports a 75,000 psi continuous operating pressure, capable of producing flow rates of .7 gpm and supports up to a .011" orifice—increasing productivity for a diverse range of materials. Additional Info: https://jetedgewaterjets.com/products/   | ||||||||
.jpg) | XP90-100 Waterjet Intensifier Pump: X-Stream Waterjet Pump The XP90-100 X-Stream Waterjet Pump is backed by nearly 10 years of extensive research and development in hyperpressure technology. It typically reduces taper by up to 0.001". This pump supports a 75,000 psi continuous operating pressure, capable of producing flow rates of 1.41 gpm and supports up to a .015" orifice—increasing productivity for a diverse range of materials. Additional Info: https://jetedgewaterjets.com/products/ | ||||||||
.jpg) | IP60-30 Waterjet Intensifier Pump The IP60-30 is designed for shops that desire the reliability of a hydraulic intensifier pump, but have limited power. This pump is capable of producing 0.6 gpm (2.3 lpm) of UHP water at a continuous operating pressure of 55,000 psi. It includes a hydraulic accumulator to provide smoother hydraulic pressure, reduce spikes, and prolong hydraulic pump life. Additional Info: https://jetedgewaterjets.com/products/ | ||||||||
.jpg) | IP60-50 Waterjet Intensifier Pump The IP60-50 Waterjet Intensifier Pump is your intro to pumps. Dependable and easy to maintain, it has the ability to cut and trim a large array of materials including heat sensitive, delicate, and tough substances. This Intensifier Pump is perfect for robotic, mobile and motion system cutting applications. Jet Edge can provide an engineering analysis and customized solution to meet your application needs. Additional Info: https://jetedgewaterjets.com/products/ | ||||||||
.jpg) | iP60-50R Water Jet Intensifier Pump - Redundant Intensifier The iP60-50R water jet intensifier pump with redundant intensifier produces 1 gpm (3.8 lpm) of 60,000 psi water for precision cutting and cleaning. The iP60-50R intensifier pump has two intensifier systems. If one of the intensifier systems should fail or require service, the second intensifier system can continue operations until the intensifier pump can be shut down for service. The iP60-50R supports orifices up to .015 in (.38 mm). Additional Info: https://jetedgewaterjets.com/products/ | ||||||||
.jpg) | IP60-75 Waterjet Intensifier Pump The IP60-75 is our straight-tothe-point waterjet. You'll be able to cut your application's material and time spent on the job. It is perfect for moderately intense cutting projects. With the ability to run three 10/30 orifice/nozzle combinations, a 1.5 gpm flow rate, and a dynamic pressure of 55,000 psi, this pump will not let your application down. Additional Info: https://jetedgewaterjets.com/products/ | ||||||||
.jpg) | iP60-100S Waterjet Intensifier Pump - Single Intensifier The iP60-100S is a single intensifier version of Jet Edge's popular 100hpwaterjet pump. The iP60-100S produces 2.0 gpm (7.6 lpm) of ultra-high pressure water for precision waterjet cutting, water blasting, cleaning and surface preparation applications. It supports orifices up to .021" (.53 mm). Like all Jet Edgewaterjet pumps, the iP60-100S features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Matched-metal components prevent galling of hydraulic system components. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump. Hydraulic fluid also is cooled and filtered. Jet Edge waterjet pumps feature a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings; free-floating self-aligning plungers increase seal life. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of ultra-high pressure water to the cutting tool, ensuring optimal cut quality. Jet Edge offers a wide range of electric and diesel waterjet intensifier pumps from 30-280hp; 36,000, 60,000 and 90,000 psi models are available. | ||||||||
.jpg) | IP60-100 Waterjet Intensifier Pump The IP60-75 is our straight-tothe-point waterjet. You'll be able to cut your application's material and time spent on the job. It is perfect for moderately intense cutting projects. With the ability to run three 10/30 orifice/nozzle combinations, a 1.5 gpm flow rate, and a dynamic pressure of 55,000 psi, this pump will not let your application down. Additional Info: https://jetedgewaterjets.com/products/ | ||||||||
.jpg) | iP60-150 Waterjet Intensifier Pump The Jet Edge iP60-150water jet pumpis capable of producing up to 3 gallons per minute (11.4 l/min) of ultra-high pressure water for precision water jet cutting and UHP surface preparation applications. It supports orifices up to .025" (.64 mm) and features dual intensifier systems. The iP60-150 includes numerous design improvements, including an efficient kidney loop hydraulic cooling and filtration system, an anti-corrosive interior coated hydraulic reservoir, easy-to-remove lift-off covers, and touch-screen controls. The pump's motor drive assembly has been mounted on an isolation system to reduce noise and vibration. Like all Jet Edgewaterjet pumps, the iP60-150 features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump, and a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of UHP water to the cutting tool, ensuring optimal cut quality. Additional Info: https://jetedgewaterjets.com/products/ | ||||||||
.jpg) | iP36-50 Mobile Waterjet Intensifier Pump The 50-horsepower iP3650 Jet Edge Mobile Waterjet Intensifier Pump is capable of producing of 36,000 psi (2,800 bar) of ultra-high pressure (UHP) water for mobile water jet cutting, surface preparation, water blasting and cleaning applications. The waterjet pump utilizes a pressure-compensated hydraulic system to drive plunger style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. Additional Info: https://jetedgewaterjets.com/products/ | ||||||||
.jpg) | iP36-100 Mobile Waterjet Intensifier Pump The 100-horsepower Jet Edge iP36-100 Mobile Intensifer Pump is capable of producing adjustable output pressures from 5,000 to 36,000 psi (345 to 2,800 bar), and flow rates from 0 to 4.0 gallons (0 to 15.1 liters) per minute The waterjet pump utilizes a pressure-compensated hydraulic system to drive plunger style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The iP23-100 water jet pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. Additional Info: https://jetedgewaterjets.com/products/ | ||||||||
.jpg) | iP36-280DS Mobile Waterjet Intensifier Pump Ideal for use in remote and/or mobile locations where electricity is scarce, the iP36-280DS waterjet intensifier pump is powered by a reliable 280hp Cummins turbo diesel engine that meets domestic and international Tier 3 emissions standards. It is capable of producing a flow rate of up to 7.2 gallons (27 liters) per minute of 36,000 psi (2,500 bar) ultra-high pressure water for waterjet cutting, surface preparation, water blasting and cleaning applications. The iP36-280DS water jet pump utilizes a pressure-compensated hydraulic system to drive dual plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
.jpg) | iP55-280DS Mobile Waterjet Intensifier Pump Ideal for use in remote and/or mobile locations where electricity is scarce, the iP55-280DS mobile waterjet intensifier pump is powered by a reliable 280hp Cummins turbo diesel engine that meets domestic and international Tier 3 emissions standards. The ip55-280DS water jet pump is capable of producing a flow rate of up to 4.1 gallons (15.5 liters) per minute of 55,000 psi (3,000 bar) ultra-high pressure water for waterjet cutting, surface preparation, water blasting, and cleaning applications. The Jet Edge iP55-280DSwater jet pumputilizes a pressure-compensated hydraulic system to drive dual plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The water jet pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
.jpg) | iP60-80DS Diesel Water Jet Intensifier Pump The iP60-80DS diesel-powered water jet pump is capable of producing up to 1.35 gpm (5.1 L/m) of ultra-high pressure water for mobile water jet cutting applications, and is especially suited for cold cutting in environments where heat and flames are restricted. Built with the contractor in mind, the iP60-80DS is powered by a reliable four-cylinder Cummins turbocharged diesel engine and is designed for portability and ease of maintenance. Intensifier components can be accessed without having to get into the hydraulic center section and hydraulic rod seal. No special tools are required. The Jet Edge iP60-80DS waterjet intensifier pump is made in the U.S.A. | ||||||||
| IP60-200 Waterjet Intensifier Pump The IP60-200 is a waterjet pump beast. With a 4.0 gpm flow rate at 55,000 psi dynamic, you can run up to four 15/45 orifice/ nozzle combinations to cut through thick material and generate four parts at a time. You'll be able to cut your application's material and time spent on the job with this versatile pump. Additional Info: https://jetedgewaterjets.com/products/ | |||||||||
| |
