 | Products / Services: |  |
| Click on a category to see this company's product/service line for the chosen category. | ||
 |  |
| Jet Edge | St. Michael, MN | |
| |||||||||
| * Click on an image to enlarge it in a new window * | |||||||||
.jpg) | 90,000 PSI X-Stream xp90-50 Waterjet Intensifier Pump Capable of producing pressures in excess of 90,000psi, the 50hp X-Streamwaterjet intensifier pumpachieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60,000psi waterjet pumps, enabling users to increase productivity and reduce part costs. The X-Streamwater jet pumpproduces 50% more pressure than a 60,000psi intensifier pump, resulting in a 40-50% increase in productivity for many materials. The X-Stream supports a 75,000psi continuous operating pressure. Compared to a 60,000psi water jet pump, typical operating pressures of 75,000psi use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. They typically reduce taper by up to 0.001". The X-Stream is capable of producing flow rates of 0.7 gpm and supports up to a .011" orifice. Its fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology.   | ||||||||
.jpg) | 90,000 PSI X-Stream xp90-100 Waterjet Intensifier Pump Capable of producing pressures in excess of 90,000psi, the 100hp X-Streamwater jet pumpachieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60,000psi pumps, enabling users to increase productivity and reduce part costs. The X-Stream water jet pump produces 50% more pressure than a 60,000psi water jet intensifier pump, resulting in a 40-50% increase in productivity for many materials. The X-Stream supports a 75,000psi continuous operating pressure. Compared to a 60,000psi water jet pump, typical operating pressures of 75,000psi use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. They typically reduce taper by up to 0.001". The X-Stream is capable of producing flow rates of 1.45gpm and supports up to a .017" orifice. Its fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology. | ||||||||
.jpg) | iP55-30 Waterjet Intensifier Pump The Jet Edge iP55-30 is a 30-horsepowerwater jet intensifier pumprated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to .65 gallons (2.5 liters) per minute to a variety of cutting, surface preparation or cleaning tools. The iP55-30 water jet pumpfeatures a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. Its 30-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump. The high-efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems. Like all Jet Edge UHP water jet intensifier pumps, the iP55-30 offers complete flexibility for waterjet cutting, cleaning or coating removal applications. | ||||||||
.jpg) | iP60-50 Waterjet Intensifier Pump Jet Edge's iP60-50 is a 50-horsepowerwater jet intensifier pumprated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 1 gallons (3.8 liters) per minute to a variety of abrasive waterjet and waterjet cutting systems and UHP surface preparation equipment. Like all Jet Edgewaterjet pumps, the iP60-50 features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump, and a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of UHP water to the water jet cutting tool, ensuring optimal cut quality. | ||||||||
.jpg) | iP60-50R Water Jet Intensifier Pump - Redundant Intensifier The iP60-50R water jet intensifier pump with redundant intensifier produces 1 gpm (3.8 lpm) of 60,000 psi water for precision cutting and cleaning. The iP60-50R intensifier pump has two intensifier systems. If one of the intensifier systems should fail or require service, the second intensifier system can continue operations until the intensifier pump can be shut down for service. The iP60-50R supports orifices up to .015 in (.38 mm). | ||||||||
.jpg) | iP55-75 Waterjet Intensifier Pump The Jet Edge iP55-75 is a 75-horsepower waterjet intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 1.5 gallons (5.7 liters) per minute to a variety of water jet cutting, surface-preparation or cleaning tools. The iP55-75water jet pumpfeatures a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. A 75-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump. The high-efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems. | ||||||||
.jpg) | iP60-100S Waterjet Intensifier Pump - Single Intensifier The iP60-100S is a single intensifier version of Jet Edge's popular 100hpwaterjet pump. The iP60-100S produces 2.0 gpm (7.6 lpm) of ultra-high pressure water for precision waterjet cutting, water blasting, cleaning and surface preparation applications. It supports orifices up to .021" (.53 mm). Like all Jet Edgewaterjet pumps, the iP60-100S features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Matched-metal components prevent galling of hydraulic system components. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump. Hydraulic fluid also is cooled and filtered. Jet Edge waterjet pumps feature a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings; free-floating self-aligning plungers increase seal life. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of ultra-high pressure water to the cutting tool, ensuring optimal cut quality. Jet Edge offers a wide range of electric and diesel waterjet intensifier pumps from 30-280hp; 36,000, 60,000 and 90,000 psi models are available. | ||||||||
.jpg) | iP60-100 Waterjet Intensifier Pump - Dual Intensifiers The iP60-100 waterjet intensifier pump is a 100hpwaterjet pumprated for 60,000 psi (4,100 bar). It features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Matched-metal components prevent galling of hydraulic system components. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump. Hydraulic fluid also is cooled and filtered. Jet Edge waterjet pumps feature a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings; free-floating self-aligning plungers increase seal life. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of ultra-high pressure water to the cutting tool, ensuring optimal cut quality. | ||||||||
.jpg) | iP60-150 Waterjet Intensifier Pump The Jet Edge iP60-150water jet pumpis capable of producing up to 3 gallons per minute (11.4 l/min) of ultra-high pressure water for precision water jet cutting and UHP surface preparation applications. It supports orifices up to .025" (.64 mm) and features dual intensifier systems. The iP60-150 includes numerous design improvements, including an efficient kidney loop hydraulic cooling and filtration system, an anti-corrosive interior coated hydraulic reservoir, easy-to-remove lift-off covers, and touch-screen controls. The pump's motor drive assembly has been mounted on an isolation system to reduce noise and vibration. Like all Jet Edgewaterjet pumps, the iP60-150 features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump, and a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of UHP water to the cutting tool, ensuring optimal cut quality. | ||||||||
.jpg) | iP55-200 Waterjet Intensifier Pump The Jet Edge iP55-200 is a 200-horsepower waterjet intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (4,100 bar) with flow rates of 0 to 4.0 gallons (15.2 liters) per minute to a variety of cutting, surface preparation or cleaning tools. The iP55-200 water jet pumpfeatures a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. Its 200-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump. The high efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems. Like all Jet EdgeUHP water jet intensifier pumps, the iP55-200 offers complete flexibility for waterjet cutting, cleaning or coating removal applications. | ||||||||
.jpg) | iP36-50 Mobile Waterjet Intensifier Pump The 50-horsepower iP3650 Jet Edge Mobile Waterjet Intensifier Pump is capable of producing of 36,000 psi (2,800 bar) of ultra-high pressure (UHP) water for mobile water jet cutting, surface preparation, water blasting and cleaning applications. The waterjet pump utilizes a pressure-compensated hydraulic system to drive plunger style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
.jpg) | iP36-100 Mobile Waterjet Intensifier Pump The 100-horsepower Jet Edge iP36-100 Mobile Intensifer Pump is capable of producing adjustable output pressures from 5,000 to 36,000 psi (345 to 2,800 bar), and flow rates from 0 to 4.0 gallons (0 to 15.1 liters) per minute The waterjet pump utilizes a pressure-compensated hydraulic system to drive plunger style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The iP23-100 water jet pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
.jpg) | iP36-280DS Mobile Waterjet Intensifier Pump Ideal for use in remote and/or mobile locations where electricity is scarce, the iP36-280DS waterjet intensifier pump is powered by a reliable 280hp Cummins turbo diesel engine that meets domestic and international Tier 3 emissions standards. It is capable of producing a flow rate of up to 7.2 gallons (27 liters) per minute of 36,000 psi (2,500 bar) ultra-high pressure water for waterjet cutting, surface preparation, water blasting and cleaning applications. The iP36-280DS water jet pump utilizes a pressure-compensated hydraulic system to drive dual plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
.jpg) | iP55-280DS Mobile Waterjet Intensifier Pump Ideal for use in remote and/or mobile locations where electricity is scarce, the iP55-280DS mobile waterjet intensifier pump is powered by a reliable 280hp Cummins turbo diesel engine that meets domestic and international Tier 3 emissions standards. The ip55-280DS water jet pump is capable of producing a flow rate of up to 4.1 gallons (15.5 liters) per minute of 55,000 psi (3,000 bar) ultra-high pressure water for waterjet cutting, surface preparation, water blasting, and cleaning applications. The Jet Edge iP55-280DSwater jet pumputilizes a pressure-compensated hydraulic system to drive dual plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The water jet pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
.jpg) | iP60-80DS Diesel Water Jet Intensifier Pump The iP60-80DS diesel-powered water jet pump is capable of producing up to 1.35 gpm (5.1 L/m) of ultra-high pressure water for mobile water jet cutting applications, and is especially suited for cold cutting in environments where heat and flames are restricted. Built with the contractor in mind, the iP60-80DS is powered by a reliable four-cylinder Cummins turbocharged diesel engine and is designed for portability and ease of maintenance. Intensifier components can be accessed without having to get into the hydraulic center section and hydraulic rod seal. No special tools are required. The Jet Edge iP60-80DS waterjet intensifier pump is made in the U.S.A. | ||||||||
| 90,000 PSI X-Stream xp90-50 Waterjet Intensifier Pump Capable of producing pressures in excess of 90,000psi, the 50hp X-Streamwaterjet intensifier pumpachieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60,000psi waterjet pumps, enabling users to increase productivity and reduce part costs. The X-Streamwater jet pumpproduces 50% more pressure than a 60,000psi intensifier pump, resulting in a 40-50% increase in productivity for many materials. The X-Stream supports a 75,000psi continuous operating pressure. Compared to a 60,000psi water jet pump, typical operating pressures of 75,000psi use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. They typically reduce taper by up to 0.001". The X-Stream is capable of producing flow rates of 0.7 gpm and supports up to a .011" orifice. Its fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology. | ||||||||
| 90,000 PSI X-Stream xp90-100 Waterjet Intensifier Pump Capable of producing pressures in excess of 90,000psi, the 100hp X-Streamwater jet pumpachieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60,000psi pumps, enabling users to increase productivity and reduce part costs. The X-Stream water jet pump produces 50% more pressure than a 60,000psi water jet intensifier pump, resulting in a 40-50% increase in productivity for many materials. The X-Stream supports a 75,000psi continuous operating pressure. Compared to a 60,000psi water jet pump, typical operating pressures of 75,000psi use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. They typically reduce taper by up to 0.001". The X-Stream is capable of producing flow rates of 1.45gpm and supports up to a .017" orifice. Its fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology. | ||||||||
| iP55-30 Waterjet Intensifier Pump The Jet Edge iP55-30 is a 30-horsepowerwater jet intensifier pumprated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to .65 gallons (2.5 liters) per minute to a variety of cutting, surface preparation or cleaning tools. The iP55-30 water jet pumpfeatures a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. Its 30-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump. The high-efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems. Like all Jet Edge UHP water jet intensifier pumps, the iP55-30 offers complete flexibility for waterjet cutting, cleaning or coating removal applications. | ||||||||
| iP60-50 Waterjet Intensifier Pump Jet Edge's iP60-50 is a 50-horsepowerwater jet intensifier pumprated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 1 gallons (3.8 liters) per minute to a variety of abrasive waterjet and waterjet cutting systems and UHP surface preparation equipment. Like all Jet Edgewaterjet pumps, the iP60-50 features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump, and a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of UHP water to the water jet cutting tool, ensuring optimal cut quality. | ||||||||
| iP60-50R Water Jet Intensifier Pump - Redundant Intensifier The iP60-50R water jet intensifier pump with redundant intensifier produces 1 gpm (3.8 lpm) of 60,000 psi water for precision cutting and cleaning. The iP60-50R intensifier pump has two intensifier systems. If one of the intensifier systems should fail or require service, the second intensifier system can continue operations until the intensifier pump can be shut down for service. The iP60-50R supports orifices up to .015 in (.38 mm). | ||||||||
| iP55-75 Waterjet Intensifier Pump The Jet Edge iP55-75 is a 75-horsepower waterjet intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 1.5 gallons (5.7 liters) per minute to a variety of water jet cutting, surface-preparation or cleaning tools. The iP55-75water jet pumpfeatures a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. A 75-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump. The high-efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems. | ||||||||
| iP60-100S Waterjet Intensifier Pump - Single Intensifier The iP60-100S is a single intensifier version of Jet Edge's popular 100hpwaterjet pump. The iP60-100S produces 2.0 gpm (7.6 lpm) of ultra-high pressure water for precision waterjet cutting, water blasting, cleaning and surface preparation applications. It supports orifices up to .021" (.53 mm). Like all Jet Edgewaterjet pumps, the iP60-100S features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Matched-metal components prevent galling of hydraulic system components. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump. Hydraulic fluid also is cooled and filtered. Jet Edge waterjet pumps feature a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings; free-floating self-aligning plungers increase seal life. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of ultra-high pressure water to the cutting tool, ensuring optimal cut quality. Jet Edge offers a wide range of electric and diesel waterjet intensifier pumps from 30-280hp; 36,000, 60,000 and 90,000 psi models are available. | ||||||||
| iP60-100 Waterjet Intensifier Pump - Dual Intensifiers The iP60-100 waterjet intensifier pump is a 100hpwaterjet pumprated for 60,000 psi (4,100 bar). It features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Matched-metal components prevent galling of hydraulic system components. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump. Hydraulic fluid also is cooled and filtered. Jet Edge waterjet pumps feature a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings; free-floating self-aligning plungers increase seal life. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of ultra-high pressure water to the cutting tool, ensuring optimal cut quality. | ||||||||
| iP60-150 Waterjet Intensifier Pump The Jet Edge iP60-150water jet pumpis capable of producing up to 3 gallons per minute (11.4 l/min) of ultra-high pressure water for precision water jet cutting and UHP surface preparation applications. It supports orifices up to .025" (.64 mm) and features dual intensifier systems. The iP60-150 includes numerous design improvements, including an efficient kidney loop hydraulic cooling and filtration system, an anti-corrosive interior coated hydraulic reservoir, easy-to-remove lift-off covers, and touch-screen controls. The pump's motor drive assembly has been mounted on an isolation system to reduce noise and vibration. Like all Jet Edgewaterjet pumps, the iP60-150 features Jet Edge's reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump, and a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings. Jet Edge's hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of UHP water to the cutting tool, ensuring optimal cut quality. | ||||||||
| iP55-200 Waterjet Intensifier Pump The Jet Edge iP55-200 is a 200-horsepower waterjet intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (4,100 bar) with flow rates of 0 to 4.0 gallons (15.2 liters) per minute to a variety of cutting, surface preparation or cleaning tools. The iP55-200 water jet pumpfeatures a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. Its 200-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump. The high efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems. Like all Jet EdgeUHP water jet intensifier pumps, the iP55-200 offers complete flexibility for waterjet cutting, cleaning or coating removal applications. | ||||||||
| iP36-50 Mobile Waterjet Intensifier Pump The 50-horsepower iP3650 Jet Edge Mobile Waterjet Intensifier Pump is capable of producing of 36,000 psi (2,800 bar) of ultra-high pressure (UHP) water for mobile water jet cutting, surface preparation, water blasting and cleaning applications. The waterjet pump utilizes a pressure-compensated hydraulic system to drive plunger style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
| iP36-100 Mobile Waterjet Intensifier Pump The 100-horsepower Jet Edge iP36-100 Mobile Intensifer Pump is capable of producing adjustable output pressures from 5,000 to 36,000 psi (345 to 2,800 bar), and flow rates from 0 to 4.0 gallons (0 to 15.1 liters) per minute The waterjet pump utilizes a pressure-compensated hydraulic system to drive plunger style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The iP23-100 water jet pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
| iP36-280DS Mobile Waterjet Intensifier Pump Ideal for use in remote and/or mobile locations where electricity is scarce, the iP36-280DS waterjet intensifier pump is powered by a reliable 280hp Cummins turbo diesel engine that meets domestic and international Tier 3 emissions standards. It is capable of producing a flow rate of up to 7.2 gallons (27 liters) per minute of 36,000 psi (2,500 bar) ultra-high pressure water for waterjet cutting, surface preparation, water blasting and cleaning applications. The iP36-280DS water jet pump utilizes a pressure-compensated hydraulic system to drive dual plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
| iP55-280DS Mobile Waterjet Intensifier Pump Ideal for use in remote and/or mobile locations where electricity is scarce, the iP55-280DS mobile waterjet intensifier pump is powered by a reliable 280hp Cummins turbo diesel engine that meets domestic and international Tier 3 emissions standards. The ip55-280DS water jet pump is capable of producing a flow rate of up to 4.1 gallons (15.5 liters) per minute of 55,000 psi (3,000 bar) ultra-high pressure water for waterjet cutting, surface preparation, water blasting, and cleaning applications. The Jet Edge iP55-280DSwater jet pumputilizes a pressure-compensated hydraulic system to drive dual plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The water jet pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility. | ||||||||
| iP60-80DS Diesel Water Jet Intensifier Pump The iP60-80DS diesel-powered water jet pump is capable of producing up to 1.35 gpm (5.1 L/m) of ultra-high pressure water for mobile water jet cutting applications, and is especially suited for cold cutting in environments where heat and flames are restricted. Built with the contractor in mind, the iP60-80DS is powered by a reliable four-cylinder Cummins turbocharged diesel engine and is designed for portability and ease of maintenance. Intensifier components can be accessed without having to get into the hydraulic center section and hydraulic rod seal. No special tools are required. The Jet Edge iP60-80DS waterjet intensifier pump is made in the U.S.A. | ||||||||
| |
