Nippon Magnetics USA, Inc.Torrance, CA
 
E-mailE-mail CompanyComputer and GlobeVisit WebsitePhone
Phone: 310-533-8290
Fax: 310-533-8295
 
* Click on an image to enlarge it in a new window *
 Electromagnetic Separator
 
Removes fine iron powder from base material
  • Easy installation
  • Removes fine grains even in low fluidity
  • Able to process high temperature materials
  • Screens are easy to clean/maintain
  • Base material never enters separation chamber
  • Manual, semi-automated and automated systems available

 
The CG, AT and FAT electromagnetic separators are designed specifically to remove fine iron powders introduced to the base material during the grinding process. Model CG is a base unit model requiring mechanical removal of the magnetic filter screen. Model AT is a semi continuous operation unit with two legs. While one leg is filtering material, releasing the magnetic force cleans the other leg. Model FAT is a continuous operation unit. Two CG units are installed in parallel with timer to alternate the flow between the two units. Iron powder is collected in a dumper box. Common powder base materials include chemical powders, powdered minerals, and dehydrated powdered foods. This device commonly follows a milling or grinding operation.
Get a Quote View Literature
 
   
 Dry, Self-Cooled Suspension Electromagnet Separator
 
Patented self-cooling design saves energy and reduces maintenance
  • No insulating oil reduces fire hazard and maintenance
  • Maintains higher long term magnetic force over air-cooled or oil-cooled units
  • Not effected by vibration, oscillation or tilting loads
  • No oil design eliminates maintenance issue, fire hazard and paperwork

 
The HUF-S is a dry, self-cooled, suspension type of magnetic separator based on an innovative concept. A magnetization coil is connected to a radiant cooling plate via selective affinity (a patented hybridization method), producing an enhanced cooling effect. This new, suspension type hybrid magnetic separator is ideal for waste-processing plants handling bulky waste that generates large amounts of powdery dust.
 
The HUF-S does not use insulating oil or cooling fans and yet efficiently cools the unit maintaining maximum magnetic strength over long hours of operation. Insulating oil has a flash point of 150C and create a Class 4 hazardous substance requiring registration with fire authorities. Cooling fans create noise and consume additional power. Vibration, oscillation or tilting loads do not affect the HUF-S's lightweight structure.
Get a Quote View Literature
 
   
 Electromagnet Drum Separator
 
Large diameter drum separator
  • Excellent for scrap iron recovery from crushed bulk waste
  • Pre-separator for shredder line

 
The EDS electromagnet drum separator is designed with a large drum to aid in the capture of scrap iron and ferrous material from bulk waste or in conjunction with a recycling shredder. The drum is mounted at the end of a belt, above the belt with waste or shredded product traveling on a belt below. The EDS electromagnet drum separator lifts the material from a belt underneath and carries it up and over the drum, dropping it on the opposite side of the drum in separate pile for the rest of the material that simply falls off the end of the belt.
 
EDS - Model EDS is a spool shaped drum separator used for scrap metal and bulk waste in conjunction with a shredder line. Need sizes, options and styles available. Custom products are available on request.
 
Get a Quote View Literature