- Products
- Profile / Contact Info
- E-Mail Company
 | Products / Services: |  |
| Click on a category to see this company's product/service line for the chosen category. | ||
 |  |
| Nippon Magnetics USA, Inc. | Torrance, CA | |
| |||||||||
| * Click on an image to enlarge it in a new window * | |||||||||
.jpg) | Electromagnet Drum Separator Large diameter drum separator
The EDS electromagnet drum separator is designed with a large drum to aid in the capture of scrap iron and ferrous material from bulk waste or in conjunction with a recycling shredder. The drum is mounted at the end of a belt, above the belt with waste or shredded product traveling on a belt below. The EDS electromagnet drum separator lifts the material from a belt underneath and carries it up and over the drum, dropping it on the opposite side of the drum in separate pile for the rest of the material that simply falls off the end of the belt. EDS - Model EDS is a spool shaped drum separator used for scrap metal and bulk waste in conjunction with a shredder line. Need sizes, options and styles available. Custom products are available on request.   | ||||||||
.jpg) | Twin-pole permanent magnet Separator Separates traditionally difficult types of scrap iron
Sometimes using a standard permanent magnet drum separator is not enough. Materials with low magnetic attraction may slip through into the plastics or aluminum bins. The Twin Pole permanent magnet, drum separators using two drums spinning in opposite directions, creating a wide strong magnetic field that captures materials with low magnetic attraction. These materials are kicked to the side while the non-magnetic materials such as plastic, glass, and aluminum drop straight through. Nippon Magnetics can produce multi-stage twin pole separators to meet special requirements. This technology is typically used in recycling and reprocessing applications. Additional Info: http://www.nipponmagnetics.com/twin-pole-permanent-magnet-separator-p-6-category-2.html | ||||||||
.jpg) | Permanent Magnet Separator Working standard in drum magnetic separators
The EN and ENS permanent magnet drum separators are very commonly used in processing and recycling industries to remove, purify or separate materials, allowing them to be of higher value. EN and ENS separators work well for mining and mineral processing requires pulverizing materials and then separating the ferrous or iron content from the batch. Ceramics often deal with very fine powders, which are produced by metal grinding on metal. This leaves fine particles and residue of metal filing and powder, which need to be removed to purify the ceramic powder. Food processing – grinding wheat, oats, corn, etc. – use similar techniques, requiring the removal of the metal residue and powder. Chemical processing also requires pure base materials in order to have the proper chemical reaction and blending. Moving from fine powders to larger parts, recycling requires separating materials into their proper group to maximize their value. Wood and food processing are also common application for these separators. Nippon Magnetics' EN and ENS separators are used throughout the world for sorting and separating ferrous metal from non-ferrous metal from plastic from glass, leaving each in their own bin. EN - Model EN is a plain drum shaped separator used for both wet and dry applications. Two specific types are available; either horizontal or vertical poles. The model EN is available in four standard drum diameters; 265 mm (10.4 in), 315 mm (12.4 in), 355 mm (14 in), and 405 mm (16 in). The drums are available in a number of widths ranges from 300 mm (11.8 in) to 900 mm (35.4 in) depending on the drum diameter – see table. Processing capacity ranges between 20 M3/hour (706.3 cf/hour) to 118 M3/hour (4167.1 cf/hour) depending on the drum width and diameter. Custom products are available on request. ENS – Model ENS is an EN separator enclosed in a housing. It may be used in wet or dry applications and the poles can be aligned either horizontally or vertically. Since this unit is enclosed in a sheet metal housing1 the standard drum diameter can be extended to 508 mm (20 in). The drum width range is from 300 mm (11.8 in) to 1000 mm (39.3 in) depending on the drum diameter – see table. Processing capacity ranges between 20 M3/hour (706.3 cf/hour) to 158 M3/hour (5579.7 cf/hour). Custom products are available on request. Air cooled high temperature models are also available on request. Standard product uses a ferrite magnet, 1 Stainless steel housing optional | ||||||||
| |
