Product News and Press Releases
December 28, 2024
New Video from Eriez Features E-Z Tec XR-SS X-Ray Inspection Systems
ERIEZ, Erie, PA
29 Dec 2010 — Eriez has produced a 2 ½ minute video highlighting its E-Z Tec® XR-SS (Side Shoot) Automatic X-Ray Inspection System which is ideal for use on high speed canning lines and upright non-glass containers. The video, narrated by Ray Spurgeon, Product Manager—X-Ray Inspection Systems, can be viewed at Eriez’ YouTube channel: EriezMarcom.
Listed Under: X-Ray Inspection Systems
Series 3100 Explosion-Proof Differential Pressure Transmitter
Dwyer Instruments, Inc., Michigan City, IN
29 Dec 2010 — Mercoid® a division of Dwyer Instruments, Inc., the preferred source for your complete range of practical and affordable instrumentation, is announcing the release of its NEW SERIES 3100 SMART PRESSURE TRANSMITTER.
Listed Under: Transmitters
Advanced Antivibration Components - AAC, New Hyde Park, NY
28 Dec 2010 — A video from Advanced Antivibration Components - AAC - shows the superior isolation effectiveness achieved with their soft silicone gel based products for isolating equipment, instrumentation or components.
Listed Under: Vibration Isolators
TIP-TITE™ High-Lift Box/Container Dumper
Flexicon Corporation, Bethlehem, PA
27 Dec 2010 — A new TIP-TITE™ High-Lift Box/Container Dumper from Flexicon discharges dust-free into vessels 6 to 10 ft (183 to 305 cm) above the plant floor.
Listed Under: Dumpers
Eriez® PM Rare Earth Grate-in-Housings Protect Plastic Processors
ERIEZ, Erie, PA
21 Dec 2010 — Eriez’ new, state-of-the-art PM Rare Earth Grate-in-Housings complement the wide array of grate magnets offered by Eriez®, a pioneer in permanent magnetic separation since 1942. PM Grate-in- Housings are ideal for removing fine ferrous contamination from plastic pellets, flake and regrind prior to the injection molding machine, extruder or compounding equipment.
Listed Under: Grate Magnets
Kason Corporation Introduces New "Flo-Thru" Sanitary, Low Profile Sifter
Kason Corporation, Millburn, NJ
17 Dec 2010 — A new "Flo-Thru" Sanitary Sifter model K40-1FT-SS from Kason Corporation reduces height requirements while increasing screening capacity.
Listed Under: Sifters
Saelig Introduces Easy-Use Universal USB Controller Board With 50 I/O Lines
Saelig Company Inc, Fairport, NY
16 Dec 2010 — IO-Warrior56 is a universal USB Controller that allows easy access to input or output functions via a USB bus. Featuring 50 generic I/O lines, IO-Warrior56 is also an I2C/SPI master, allowing interface with a wide range of available ICs.
Listed Under: Controllers
Thermally Conductive Epoxy Delivers High Temperature Resistance & Outstanding Electrical Insulation
Master Bond Inc, Hackensack, NJ
16 Dec 2010 — HACKENSACK, NJ – December 16, 2010 – Master Bond has developed a highly thermally conductive epoxy system that is specially designed to help mitigate the issues associated with tightly packed components and miniaturized electronic circuits. With a thermal conductivity over 22 BTU•in/ft2•hr•ºF and serviceability from -60 to 400°F, Master Bond EP21ANHT delivers outstanding performance in the most demanding microelectronic applications. The cured adhesive is also a superior electrical insulator, further expanding its usefulness.
Listed Under: Epoxy Adhesives
Series CMT Carbon Monoxide Transmitter
Dwyer Instruments, Inc., Michigan City, IN
15 Dec 2010 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES CMT CARBON MONOXIDE TRANSMITTER. The series CMT accurately detects and transmits low concentrations of CO inside a parking garage or loading dock.
Binder-USA Adds M8 Rear-Mount Receptacles
Binder-USA LP, Camarillo, CA
14 Dec 2010 — Binder-USA is pleased to announce the newest addition of rear-mount potted receptacles to its line of M8 connectors. The rear-mount feature offers new mounting options to the application's panel. M8 receptacles and connectors are compact in size and ideally suited for use with industrial sensors.
Listed Under: Circular Connectors
Series EDPS Adjustable Differential Pressure Switch Meets Standard UL508
Dwyer Instruments, Inc., Michigan City, IN
14 Dec 2010 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES EDPS ETL LISTED ADJUSTABLE DIFFERENTIAL PRESSURE SWITCH used for monitoring air filters, ventilators, and industrial cooling-air circuits along with controlling air and fire-protection flaps and many other applications.
Listed Under: Differential Pressure Switches
Series TE Low Cost Temperature Sensors
Dwyer Instruments, Inc., Michigan City, IN
13 Dec 2010 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES TE DUCT AND IMMERSION BUILDING AUTOMATION TEMPERATURE SENSORS used to monitor air or water temperature throughout a building management system or an air handler unit.
Listed Under: Temperature Sensors
Series V7 Vane Operated Flow Switch with Magnetic Linkage
Dwyer Instruments, Inc., Michigan City, IN
10 Dec 2010 — The W. E. Anderson Division of Dwyer Instruments is offering a new and innovative vane operated flow switch. The Series V7 is an inexpensive switch ideal to start and stop electronic operated equipment when flow or no-flow conditions occur.
Listed Under: Flow Switches
-(2).jpg)
ERIEZ, Erie, PA
9 Dec 2010 — The E-Z Tec® DSP Metal Detector Standard Conveyor Systems from Eriez® provide users with the highest level of protection against ferrous and nonferrous metal contamination. These units are competitively priced, designed and manufactured in the United States and available for quick shipment, typically one-two weeks after receipt of order.
Listed Under: Conveyors
New DB9 Switch Provides Quick and Easy Sharing of 3 Devices with both Local & Remote Control
Electro Standards Laboratories, Cranston, RI
9 Dec 2010 — The Model 7270 is a new Single Channel DB9 Interface A/B/C Switch remote control that allows the sharing of a single DB9 device among 3 others.
Listed Under: Copper Switches
Model 9094 DB9 A/B/C Manual Network Switch Comes with a Lifetime Guarantee
Electro Standards Laboratories, Cranston, RI
9 Dec 2010 — The Model 9094 DB9 ABC Switch is manufactured with proven quality control practices. This switch has a lifetime guarantee against manufacturing defects.
Listed Under: Network Switches
Slim, Rackmount, RJ45 CAT5e ABC Switch, Model 9081, Packed with Robust Components
Electro Standards Laboratories, Cranston, RI
8 Dec 2010 — The Model 9081 ABC network switch from Electro Standards Laboratories is manufactured with high quality components including a sealed switch with self-wiping low impedance contacts.
Listed Under: Network Switches
Model 6274 ST Simplex Fiber Optic A/B/C/D Switch Features Dual Wavelength
Electro Standards Laboratories, Cranston, RI
7 Dec 2010 — Model 6274 ST Simplex, Single Mode, Dual Wavelength, Fiber Optic ABCD Switch with Remote Contact Control from Electro Standards Laboratories allows connecting one COMMON port device to any one of four networks.
Listed Under: Fiber Switches
Electro Standards Laboratories, Cranston, RI
7 Dec 2010 — The CellMite ProD Model 4349 is a high performance, high speed Data Acquisition and Sensor Monitoring board with flow control.
Listed Under: Data Acquisition Systems
Share up to 3 USB Devices from 1 Computer without Disconnecting Cables with Model 4506!
Electro Standards Laboratories, Cranston, RI
7 Dec 2010 — The Model 4506 from Electro Standards Laboratories is a USB Type-A, A/B/C switch with remote control that allows quick connection to any one of three USB Type-A devices from one COMMON device.
Listed Under: USB Switches
Miniature Accelerometer for Modal Analysis Testing, 3305A Series
Dytran Instruments, Inc., Chatsworth, CA
7 Dec 2010 — Dytran Instruments, Inc. is pleased to release a new accelerometer series designed for use in modal analysis applications. The Dytran 3305A series consists of three accelerometers, offered in sensitivities of 10 mV/g, 100 mV/g, and 500 mV/g. The 3305A series are IEPE-type piezoelectric accelerometers, and they include a ceramic shear sensing element coupled to ultra low-noise JFET electronics.
Listed Under: Accelerometers
New Precision Wedge Mounts from AAC are Designed for Precision Heavy Load Leveling
Advanced Antivibration Components - AAC, New Hyde Park, NY
7 Dec 2010 — A new series of 4 precision wedge mounts from Advanced Antivibration Components - AAC - are designed for precision leveling for heavy loads. Two mounts are designed for cleanroom use and two for general industrial applications.
Listed Under: Mounts, Vibration & Shock
ABB, Inc. - Robotics Division, Auburn Hills, MI
6 Dec 2010 — ABB Robotics, a leading supplier of industrial robots, is introducing the new IRB 2600, the latest model in its medium capacity range of multipurpose robots. The new IRB 2600 features an optimized compact design, an ultra-wide working range and a payload capacity up to 20 kg. It also offers the best accuracy and speed in its class, improving productivity through increased output, faster cycle times and lower scrap rates. The IRB 2600 is particularly suitable for arc welding, machine tending, material handling and a variety of process applications.
Listed Under: Robots & Robotic Systems
International IT Mgrs: ESL’s HP Fiber to RS232 Converters Now Include 2-Pin Euro Power Supplies
Electro Standards Laboratories, Cranston, RI
2 Dec 2010 — Fiber 232® Models 4137EU & 4139EU with 2-pin European power supplies are HP VersaLink Fiber to RS232 Converters used to connect fiber optic linked terminals to a controller having an RS-232 interface port.
Listed Under: Fiber Optic Converters
SAF Paste Heater for the Mill Industry
Stelter & Brinck, Ltd., Cincinnati, OH
2 Dec 2010 — If you’re frustrated with your SAF, submerged arc furnace, and have had shutdowns due to the paste heater not heating up the electrodes in your furnace- we can help you! Stelter & Brinck is announcing a new product in the mill industry: a gas-fired submerged arc paste heater.
Listed Under: Heaters
Techno’s New Low-Cost Multi-Axis Stepper Controller, iMC-P1 is a Compact All-in-One Unit
Techno-Isel, New Hyde Park, NY
1 Dec 2010 — Techno, Inc. Linear Motion Systems is proud to announce the iMC-P1 multi-axis stepper controller. This single-to four-axis controller is complete with drives, power supply, I/O, enclosure and software. It can be used for pick-and-place, dispensing, assembly, testing, drilling, routing, welding and general automation applications.
Listed Under: Motion Control Systems
Pushbutton or ASCII Commands Control this RJ45, CAT5e, ABCD Network Switch
Electro Standards Laboratories, Cranston, RI
30 Nov 2010 — The Model 7278 network switch can be controlled locally using the front-panel pushbutton or remotely from a DB9 (F) port using Serial ASCII Commands.
Listed Under: Network Switches
Dwyer Instruments, Inc., Michigan City, IN
24 Nov 2010 — W.E. Anderson division of Dwyer Instruments, Inc., is announcing the release of its NEW SERIES TNV PTFE NEEDLE VALVE designed for regulating corrosive gases and liquids for high purity services in laboratory and industrial applications.
Listed Under: Needle Valves
Saelig Debuts High Resolution USB-connected 3 Axis Acceleration Sensor With 125µg Sensitivity
Saelig Company Inc, Fairport, NY
23 Nov 2010 — The new USB-powered JoyWarrior24F14 sets a new price/performance benchmark for USB-based acceleration sensors, and offers acceleration resolution down to 125ug. JoyWarrior24F14 modules are based on a MEMS sensor and measure with 14-bit resolution in the ranges ±1g, ±1.5g, ±2g, ±3g, ±4g, ±8g, or ±16g, delivering 125 results per second.
Listed Under: Sensors
Miniature Triaxial Accelerometer Designed for Modal Analysis
Dytran Instruments, Inc., Chatsworth, CA
22 Nov 2010 — Dytran Instruments, Inc. is pleased to announce the release of the 3343A series, which are triaxial IEPE-type accelerometers that weigh just 2.4 grams. The 3343A series was designed for use in modal analysis and Environmental Stress Screening (ESS) applications, as well as other vibration applications where small size and lightweight is essential.
Listed Under: Accelerometers
Electric Submersible Sewage Pumps from Griffin Capable of Flows up to 5500 GPM
Griffin Dewatering, Houston, TX
18 Nov 2010 — This pump is a 77hp 10” Electric Submersible Trash Pump capable of flows up to 5,500gpm, up to 90ft of head, and 5” solids handling capacity.
Listed Under: Sewage Pumps
New RTX Precision Planetary Gearheads from Sterling Instrument Feature High Torque Design
Stock Drive Products/Sterling Instrument- SDP/SI, New Hyde Park, NY
18 Nov 2010 — A new series of RTX precision planetary gearheads from Sterling Instrument feature high torque design, and are offered in standard NEMA sizes 60 and 90. These 36 gearheads feature single, double, and triple gear stage configurations, optimized gear geometry, high torsional stiffness, captive, bearing supported input pinion, and they are sealed to extend service life.
Listed Under: Gear Heads
RigiBelt Non-Magnetic Telescopic Linear Actuator From Serapid Features New Drive Unit
Serapid, Inc, Sterling Hts, MI
18 Nov 2010 — SERAPID, a leader in mechanical lift and Rigid Push-Pull Chain Technology introduces a new drive system for their non-magnetic telescopic linear actuator - the RigiBelt. The new Drive features speeds up to 300mm/s, which is six times faster than the previous unit, and also has a higher capacity at 1000 N.
Listed Under: Linear Actuators
Dwyer Instruments, Inc., Michigan City, IN
17 Nov 2010 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES CPS CABLE PULL SWITCH designed to provide a switching system to isolate the power to the conveyor system or other similar process equipment in event of a shut-down condition.
Listed Under: Switches
AAC Provides a Variety of Vibration Isolators for Medical Applications
Advanced Antivibration Components - AAC, New Hyde Park, NY
17 Nov 2010 — Advanced Antivibration Components (AAC) offers functional vibration isolators for the Medical Industry including silicone gel pads, sheets, silicone gel, as well as wire rope isolators for larger applications. Applications include medical equipment such as flow cytometers, blood analyzers, life science cameras, sensitive electronic scales, handheld devices, carts, motors and pumps. Our silicone gel products are very effective in isolating vibration in low frequency applications with loads ranging from 0.11 to 165 lbs per mount.
Listed Under: Vibration Isolators
- HOME
- COMPANY NEWS
- INDUSTRY & GOVERNMENT NEWS
- PRODUCT NEWS
Submit Press Release
