Product News and Press Releases
December 27, 2024
Your Custom Fiber Optic Network Cables have never been Easier to Build!
Electro Standards Laboratories, Cranston, RI
30 Jun 2009 — ESL's Custom Fiber Optic Cable Design Worksheet makes it easy to build custom cables to meet specific requirements. ESL manufactures quality custom fiber optic cables in all sizes and configurations.
Listed Under: Fiber Optic Cable Assemblies
New Techno ZF1 Belt Drive Slide Lowers Automation Costs
Techno-Isel, New Hyde Park, NY
23 Jun 2009 — Techno, Inc. Linear Motion Systems has released the ZF1 Belt Drive Slide, a low cost, economical slide that can lower your costs in factory automation applications. This lightweight model is driven by a 9 mm wide HTD belt that can be ordered in travels ranging from 153 mm (6") through 2853 mm (112.3"). Perfect for tight spaces, the ZF1 Belt Drive Slide is 30 mm wide with an accompanying carriage that is 72 mm wide. The small width of the slide allows it to fit into tight spaces, increasing the versatility and options any machine builder might need in their design.
Listed Under: Linear Slides
CellView Lite Software Lightens Your Data Load with its Easy to Use GUI
Electro Standards Laboratories, Cranston, RI
22 Jun 2009 — Electro Standards Laboratories (ESL) announces its CellView Lite Software that provides an easy graphical user interface (GUI) to use with their CellMite® Intelligent Digital Conditioners. CellMites® connect directly to standard strain gages, such as load cells, extensometers, and pressure sensors. These extremely accurate conditioners simultaneously generate serial outputs for connection to PC's as well as +/- 10V analog outputs. CellMites® are available in board versions or encased units.
Listed Under: Signal Conditioners
Electro Standards Laboratories, Cranston, RI
12 Jun 2009 — Electro Standards Laboratories (ESL) is pleased to announce the addition of Model 4328 ProD high performance data acquisition and strain gage interface board to its family of CellMite® products. The CellMite® ProD is suitable for embedded applications that require high speed/high accuracy analog and digital data acquisition yet also designed for ruggedized applications, operating from -40°C to +85°C. CellMite® ProD features dual 24-bit independent strain gage channels with simultaneous sampling at 15K samples/second that can also be configured as quad 24-bit strain gage channels sampled at 5K samples/second. In addition, this unit features 12 additional 12-bit analog input channels with a throughput of 1M samples/second. Digital data acquisition is also supported with 64-bits of simultaneously sampled digital inputs that can be sampled at 20M samples/second. The CellMite® ProD has four 16-bit high performance analog output channels with user specified scaling and offset, with a range of +/-10 volts.
Listed Under: Strain Gage Indicators
Dwyer Instruments, Inc., Michigan City, IN
11 Jun 2009 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES BFM BULK FLOW MONITOR. The Flow Monitor provides effective monitoring for most flow/no flow conditions in pipes and chutes. Its sensing techniques, which use both Microwave and Doppler, makes the BFM versatile for most flow/no flow applications. The BFM offers adjustable sensitivity depending on the application demand. The BFS-1 Sensor yields many advance features. It externally mounts to the outside of the pipe or chute. You can use the Series BFM to monitor Oil Spray Systems, Discharge Chutes, Distributors, Screw Conveyors, Drag Conveyors, Water Systems, Air Systems, Pneumatic Systems, Gravity Feed Systems, Slurry Systems, Chemical Processing, Food Processing and Rotary Drums.
Listed Under: Flow Monitors
CellMite® M4331-200 Provides System Integrators w/ an Affordable & Complete LVDT-to-PC Solution
Electro Standards Laboratories, Cranston, RI
9 Jun 2009 — Electro Standards Laboratories (ESL) introduces the new Model 4331-200 CellMite® LVDT AC (Linear Variable Differential Transformer) Digital Signal Conditioner Board into their CellMite® product line. The CellMite® LVDT connects directly to two standard AC LVDT transducers and simultaneously generates a serial output for connection to a PC and a +/-10V analog output. This CellMite® LVDT embedded conditioning board can be operated with a computer or simply setup by a computer and used as a stand-alone intelligent LVDT digital signal conditioner with analog output. M4331-200 has on board storage for up to three calibrated LVDTs, each with integrated 6-point calibration that can be used to linearize the LVDT outputs. Its multidrop RS232/RS485 serial port and simple command set allow for connection of multiple units in a serial network configuration. This compact unit is ideally suited for in-situ transducer conditioning and distributed process measurements.
Listed Under: Signal Conditioners
New Grip and Rotate Modules Perform Two Operations in One Compact Package
Techno-Sommer Automatic, New Hyde Park, NY
5 Jun 2009 — Techno-Sommer Automatic is excited to announce the New DGP404 Series Parallel Grip and Rotate Modules with T-slot Guides, designed for high-load automation applications that require parts to be sorted and rotated 90 or 180 degrees. This unique combination of parallel gripper and rotator fits in tight spaces easily, while the stable T-slot guides aid the absorption of large force and moments. The DGP404 Series has separate pneumatic connections for grip and rotate cylinders, so the grip function can operate independently from the rotate function. Offered in six different models for inside and outside gripping, each unit can be set for either 90 or 180 degrees of rotation and has magnetic position sensor slots built into the housing.
Listed Under: Parallel Grippers
Stainless Steel Electric Submersible Pumps Designed to Operate in Severe Applications
Griffin Dewatering, Houston, TX
3 Jun 2009 — Griffin Pump and Equipment Inc., offers versatile stainless steel electric submersible pumps to meet the demands of applications requiring corrosion resistance and rugged durability. Whether it is clean water, gray water, or corrosive effluent, Griffin can provide the right pump for your application. Electric submersible pumps are available for flows as low as a few gallons per minute to several hundred gallons per minute, with head conditions to several hundred feet. High or low, Griffin can supply a submersible pump to meet your pumping need. Griffin's corrosion resistant electric submersible pumps come standard with stainless steel motor housings, impellers, and impeller casing.
Listed Under: Submersible Pumps
M9456 Simultaneously Switches Six PRI Channels to A or B Output Devices with No Power Required
Electro Standards Laboratories, Cranston, RI
2 Jun 2009 — Electro Standards Laboratories (ESL) has just announced the Model 9456 Six-Channel RJ45 A/B Switch. This network switch allows access to two separate Output devices, A or B, through a device connected to the Common port for each of the switch's six Primary Rate Interface (PRI) Input channels. The Model 9456 requires no power, allowing users to manually switch all six PRI channels simultaneously between A and B positions via one knob located on the front of the unit. This 6-channel A/B switch utilizes a high quality sealed switch mechanism with self-wiping contacts and is enclosed in a rugged all-aluminum 1U rackmount. All eighteen of the RJ45 Female ports are located on the rear of the unit with four pins of each RJ45 T1 channel switched (paired 1&2 and 4&5).
Listed Under: Network Switches
Ultrasonic Flowmeter Converter
Dwyer Instruments, Inc., Michigan City, IN
29 May 2009 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES PUX2 ULTRASONIC FLOWMETER CONVERTER. The PUX2 converters are paired with Series PSX2 sensors in order to utilize the transit-time difference for measuring flow rates in pipes from the outside. It is a compact and lightweight instrument incorporating the latest electronics and digital signal processing technologies, realizing high performance and easy operation. This device is designed for high accuracy and high-speed response. This portable unit is capable of 12 hours of continuous operation with its built-in battery, which requires only 3 hours to recharge. The rugged NEMA 3X enclosure allows the PUX2 to be exposed to rain, while the efficient layout of the function keys aid the user with easy page selection and setting changes.
Listed Under: Flow Meters
16-Channel ST Simplex Fiber Optic A/B/Off-Line Switch Employs Mirror Technology
Electro Standards Laboratories, Cranston, RI
27 May 2009 — Electro Standards Laboratories (ESL) has just announced its new QuickSwitch® Model 6259 16-Channel Fiber Optic ST Simplex A/B/Off-Line Switch. This Fiber Optic switch employs mirror technology and allows devices connected to the Common port of each channel to access the A or B port of each channel. Enclosed in a standard 2U rackmount casing, the Model 6259 will go Off-Line on power loss and will stop passing data. The switch may be controlled locally by using the front panel pushbuttons. There is no remote control for this unit. All 16 channels of this A/B/Offline switch are switched simultaneously and switch ports are transparent to all data. The A, B, and Common ports are ST, Multimode, 62.5/125 micron and support a wavelength of 850nm.
Listed Under: Fiber Switches
Entire Product Lineup from Kipp® Now Available
Fixtureworks, Fraser, MI
21 May 2009 — Fixtureworks® now makes available the entire product lineup from Kipp® - one of Germany's premier manufacturers of manual operating elements, actuation mechanisms and handling/securing/positioning components. The extensive offering includes 18 different product categories, and within each grouping is a wide range of options encompassing size requirements, material selections, operational directions, attachment and mounting choices, and ergonomic considerations. Fixtureworks provides items that, in addition to the pull handles includes tension levers and clamp levers, clamp handles, knurled nuts, knurled thumb screws, and hand wheels. A host of grip configurations, colors and knob styles are available, ranging from palm, wing and star grips to knurled ball knobs. Furthermore, Fixtureworks also carries Kipp's NOVO-GRIP® handle, knobs, wheels and grip line of components. Other Kipp products offered include 14 styles of spring plungers, plus locking bolts to prevent workpiece positional changes when under lateral forces.
Listed Under: Handles
New Products Designed for Casino VLT Networks
Electro Standards Laboratories, Cranston, RI
21 May 2009 — Electro Standards Laboratories (ESL) has just announced its new family of products designed for Casino VLT Networks. The four models of HP Fiber to RS-232 and RS-485 converters allow connection of HP Fiber Optic Linked Terminals to the RS-232 and RS-485 ports of controllers. The Model 4154 HP Fiber Repeater with RS-232 Traffic Monitor Port is used to regenerate data signals in order to extend the range between optically linked data terminals. It also has the capability to monitor network traffic via an RS232 Monitor Port. Electro Standards also supplies all lengths of VersaLink cable assemblies.
Listed Under: RS232 to RS485 Converters
Remotely Set Delay for Manual Position Changes w/ the DB25/X.21 BIS Interface A/B Switch
Electro Standards Laboratories, Cranston, RI
19 May 2009 — Electro Standards Laboratories (ESL) has announced the new Pathway® Model 7231 DB25/X.21 BIS Interface A/B Switch with Serial Remote Control which allows the sharing of a DB25/X.21 BIS Interface device between two other X.21 BIS Interface devices. M7231 can be controlled manually by front panel pushbuttons or remotely via a DB9 connector accepting RS232 Serial Data. This compact, 2-position data switch allows the user to issue remote ASCII commands to set a pushbutton-position change delay value. This creates a "Duration Time" for which the operator must hold down the pushbutton for a period of time before the actual change of switch position occurs. All 25 interface pins on the Model 7231 are switched and switch ports are transparent to data speed and format. A wide range UL approved power module is also supplied with the unit to cover North American and European applications.
Listed Under: Copper Switches
Silicone Gel Tape & Chip Vibration Isolators
Advanced Antivibration Components - AAC, New Hyde Park, NY
15 May 2009 — New Silicone Gel Tape & Chip Vibration Isolators From AAC Features Superior Damping Performance. The mounts are designed for light to medium loads. The gel tape is stocked in 1000 mm lengths and in 3 thicknesses. The chip isolators are priced per sheet of 25 chips. The chips come in thicknesses ranging from 3 mm to 10 mm. An important feature of these metric isolators is their ability to operate effectively over a very wide temperature range of from -40°C to +100°C (-40°F to 212°F). They offer excellent chemical and weather resistance and are low in compression set and are perfect for use in narrow space applications.
Listed Under: Mounts, Vibration & Shock
Automated Ball Valves 3-Way SS Flange
Dwyer Instruments, Inc., Michigan City, IN
13 May 2009 — W.E. Anderson, a division of Dwyer Instruments, Inc., is announcing the release of its NEW SERIES 3BV2 AUTOMATED BALL VALVES - 3-WAY SS FLANGE. The Series 3BV2 incorporates a full port design for maximum flow rates with minimal pressure drop. The ANSI 150# Flange comes in a variety of connection sizes to suit many applications, and is perfect for mixing in a variety of applications including food and chemical processing industries. These ball valves feature a blow out proof stem and reinforced RTFE seats and seals for added safety, longer life and leak free operation. The four seat design allows for high cycling automation. The 3BV2 comes with a choice of either pneumatic or electric actuators.
Listed Under: Ball Valves
Very High Speed Ruggedized Model 4152/4153 Interface Converter Ideal for RS485 Multi-Point Apps
Electro Standards Laboratories, Cranston, RI
11 May 2009 — Electro Standards Laboratories (ESL) announces the new Model 4152/4153 ST Fiber-to-Multi-Point RS485/422/232 Interface Converter. This very high speed ruggedized interface converter has typical operating speeds up to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion, providing an industrial solution for applications requiring a single point-to-point or a multi-point communications link over short and long distances. Typical applications include PC to PC long distance communications, factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, ATMs and serial communications in harsh environments. The Model 4152/4153 features ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces and features 3kVDC isolation to prevent system ground loops.
Listed Under: Interface Converters
Fixturing Pull Clamps Lock & Precisely Locate Workpieces
Fixtureworks, Fraser, MI
7 May 2009 — Ergonomics, precision and secure holding power...all available with the new, versatile lineup of Imao® pull clamps from Fixtureworks. The pull clamps are designed to provide high-accuracy workpiece locating, utilizing precision ground clamping pins that are used in conjunction with the fixture-mounted clamp mechanisms. The clamp devices apply downward pressure on the pins via a quarter turn of the clamp's handle that actuates a spiral cam (ball and groove) design; this in turn applies downward pressure on the workpiece and secures it in position. The accuracy of the pins help to establish additional locating precision beyond that provided by the fixture, while the ergonomic operation of the clamping base and easy loading of parts make these clamping systems ideal for high volume, repetitive jobs.
Listed Under: Clamps
Food Service Infrared Thermometer
Dwyer Instruments, Inc., Michigan City, IN
6 May 2009 — Dwyer Instruments, Inc., is announcing the release of its NEW MODEL FST-300 FOOD SERVICE INFRARED THERMOMETER. The Model FST-300 has both an infrared sensor and an immersion probe to safely monitor surface and product temperatures. The HACCP zone display quickly gives visual indications when products are within a safe storage temperature range for both hot and cold food products. The FST-300 incorporates a built-in white light to illuminate the measurement area.
Listed Under: Infrared Thermometers
Video from SDP/SI Features Fairloc® the Integral Rotating Component Fastening System
Stock Drive Products/Sterling Instrument- SDP/SI, New Hyde Park, NY
4 May 2009 — Fastening rotating components to shafts becomes easier by incorporating Fairloc®, the integral fastener from Stock Drive Products and Sterling Instrument into your design. To demonstrate this unique, all in one fastening device, SDP/SI has produced a to minute video entitled "Fairloc®, The Integral Fastener". Fairloc® is designed to solve phasing, timing, positioning and frequent removal problems which conventional fastening methods, such as clamps, keyways, pins or set screws, cannot properly handle. The patented system offers several advantages including: built-in overload protection, full use of the bore, easy adjustment, compact self-contained design. With the very economical Fairloc® system, the shaft remains smooth. Being self-contained, there is no additional inventory to stock. The component can be easily adjusted and is fully supported.
Listed Under: Shafts
Comprehensive Secure Switching System for Video Conference Rooms
Electro Standards Laboratories, Cranston, RI
1 May 2009 — Electro Standards Laboratories (ESL) has just announced its new Secure Switching System for Video Conference Rooms. This rackmounted system facilitates passing the connection of various voice & data lines, both copper and fiber media, from a designated set of equipment to an existing building network, or disconnects the same set of lines from the building network, isolating all equipment in the designated room or area. The Secure Switching System includes a Secure/NonSecure Indicator Unit, a Fiber Optic SC Data Pass/Off-Line Switch, a 16-Channel Ethernet Data Pass/Off-Line Switch, a 16-Channel Telco Data Pass/Off-Line Switch and a 6-Channel ISDN Data Pass/Off-Line Switch.
Listed Under: Ethernet Switches
Duct Mounted Airflow Measurement Stations Ideal for Turbulent Conditions
Dwyer Instruments, Inc., Michigan City, IN
30 Apr 2009 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES STRA DUCT MOUNTED AIRFLOW MEASUREMENT STATIONS. The STRA is ideal for airflow measurement in duct systems having highly turbulent conditions at the point of measurement, and consists of single or multiple airflow elements, factory mounted and pre-piped in a casing designed for flanged connection to the ductwork.
Listed Under: Measuring Instruments
Pressure Sensors for Hydraulic Applications
Kavlico, Moorpark, CA
29 Apr 2009 — Kavlico has a suite of sensors that have been designed to perform in a wide variety of hydraulic applications. Capable of operating for millions of pressure cycles, these low power consumption pressure sensors provide an accurate, reliable, and stable signal over many years of operation in the harshest environments.
Listed Under: Pressure Sensors
Electro Standards Laboratories, Cranston, RI
27 Apr 2009 — Electro Standards Laboratories (ESL) announces the new Model 4163/4164 Ethernet-to-RS485/422/232 Interface Converter. This High Speed Ruggedized Interface Converter provides an industrial solution for remote monitoring and control of various devices from virtually anywhere over a LAN/WAN or Internet connection, and converts Ethernet 10/100 Mbps IEEE 802.3 compliant data from a standard LAN/WAN connection to a serial asynchronous data interface over RS232 or RS485/422 networks with a user-selectable baud rate of up to 921,600 bps. This RoHS compliant converter also features ESD protection circuitry on all receivers/transmitters for both RS232 and RS485/422 interfaces. The Model 4163/4164 supports typical devices such as PLC, motor controls, power monitoring, and multi-drop data collection devices such as POS, barcode readers, time clocks, scales, data entry terminals, ATM's as well as other remote serial communications devices. Typical applications include building automation, industrial manufacturing, utilities, transportation and retail POS.
Listed Under: Ethernet Converters
Pro Series CNC Router for Panel Process Manufacturing
Techno, Inc., New Hyde Park, NY
24 Apr 2009 — Techno, Inc. CNC Routers announced the introduction of the Pro Series CNC Router to their current product line of CNC machining solutions. Designed to meet the high demands of panel process manufacturing, the Pro Series is constructed of large heavy tubing that is both welded and stress-relieved, the perfect foundation for Technos precision drive system. Also comprised of precision ball screw drives on all three axes, THK rails and bearings, high-speed closed-loop servomotor and drives, the Pro Series drive system ensures minimal maintenance, machine longevity and superior machine performance.
Listed Under: Routers
Dwyer Instruments, Inc., Michigan City, IN
22 Apr 2009 — W.E. Anderson a Division of Dwyer Instruments, Inc., is announcing the release of its NEW SERIES RPV REDUCING PRESSURE VALVE. The RPV is a compact, moderately priced steam, water or gas regulator intended to satisfy most fundamental requirements for pressure reduction. It is used where cost and/or space limitations are the primary concern, the Reducing Pressure Valve is a rugged and economical choice for use on steam irons, autoclaves, laundry mangles, single radiators, steam tables, vulcanizers, steam, water or gas applications.
Listed Under: Pressure-Reducing Valves
Improved T-4 Adjustable Linear Feeder
Automation Devices, Inc., Fairview, PA
21 Apr 2009 — Bob Hoover, Feeder Technician in Automation Devices' VFC Division, has developed a fully adjustable linear feeder that conveys very small parts through vibration. ADI's Model T-4 (part # 5200A) is the smallest of the Inline Feeder Series and services track lengths of up to 10" with weights up to 2lbs. Adjusting the T-4 is as easy as changing the channel on your clock radio. By effectively lengthening and shortening the working length of its fiberglass springs, the strength of the T-4 can handle a wide range of weight and length modification of your track without the need for factory intervention.
Listed Under: Linear Feeders
Acu-Trac® Smart 485 Level Transducer
SSI Technologies Inc. - Controls Division, Janesville, WI
20 Apr 2009 — The Controls Division of SSI Technologies Inc., is pleased to announce the release of Smart 485 its newest entry in the Acu-Trac® product line. The Acu-Trac® Smart 485 Level Transducer is an economical level sensing solution for storage containers with depths up to 1.9 meters (76 inches) for gasoline and 2.5 meters (98 inches) for other media. It combines level monitoring with RS-485 real time level messaging. The Smart 485 family is chemically compatible with a wide variety of liquids - gasoline, diesel fuel, oils, urea (Adblue), water, wastewater, ethanol, hydraulic fluid, and engine coolants. It was designed for non-contact liquid level or industrial process control applications to 85°C. The Smart 485 can be used in general industrial, heavy duty vehicle, diesel engine generators, and mining, agriculture, water and waste water markets.
Listed Under: Level Transducers
Fiber Optic Cassette with Military Style Connectors Speeds Fiber Installation
Electro Standards Laboratories, Cranston, RI
17 Apr 2009 — Electro Standards Laboratories (ESL) has just announced its new Model 6008 high density, pre-terminated Fiber Optic Cassette. The Model 6008 breaks out one MTP® eight strand fiber cable into eight ST Military Style connectors. The MTP® connector is an 8-strand single mode angle polish connector. Each ST connector is a single strand singlemode Military Style connector. This system offers the advantages of saving duct space and installation time and the ruggedness of Military Style connectors. Up to three Model 6008 Cassettes mount into a Model 3294 Rackmount Fiber Patch Enclosure. The Model 6008 cassette's cabling side (rear) contains an MTP® interface for connecting the trunk or backbone cabling. An internal optical assembly within the cassette interconnects the rear and front ports. A speedy connection is established when patch cords from the equipment are plugged into the front-panel Military Style connectors.
Listed Under: Fiber Optic Connectors
Side Clamps Provide Superior Tool Access to Workpieces & Secure Hold
Fixtureworks, Fraser, MI
14 Apr 2009 — Fixtureworks® offers its latest workholding solution in a versatile series of Side Clamps, developed and manufactured by Imao®, a leading Japanese producer of fixturing clamps, holding systems and machine tool accessories. From an ergonomic, one-touch operation for high-volume repetitive applications, to six other styles offering a variety of mounting and size options, the side clamp concept is comprised of a moving jaw that simultaneously travels forward and downward to securely lock workpieces in position. At the same time, the clamps' design typically provides low profile gripping of the workpiece on the side and permits open accessibility to surfaces for machine tool paths and processing operations... completing multi-task work in single machine setups and fewer fixturing requirements.
Listed Under: Clamps
New Split Spools for Line-shaft Conveyors
DuraBelt, Inc., Hilliard, OH
8 Apr 2009 — New Split Spool from DuraBelt Inc., for line-shaft conveyors quickly replaces standard, one-piece line-shaft spools and eliminates the need to disassemble the conveyor to replace spools. Saves hours of labor and conveyor downtime. Parts fit together precisely, so there are virtually no bumps or gaps that can abrade line-shaft belts. High concentricity provides very efficient rotation, which reduces rolling resistance, thereby saving energy and extending drive belt life. Alignment notches on one side allow installation by feel alone, so part can be quickly installed behind frames or guards -- even in the dark. Tight snap-fit means no screws to tighten or lose.
Listed Under: Split Spools
Dwyer Instruments, Inc., Michigan City, IN
6 Apr 2009 — Dwyer Instruments, Inc., is announcing the release of its NEW PFG PROCESS FILTER GAGE. The gage is designed for applications requiring a simple, low cost differential pressure indicator for filter status check or other pressure drop situations, and for determining the state of an in-line filter. The differential pressure indicator determines the pressure drop on either side of a filter through its 1/4" female NPT pressure connections, and relates the value to one of three zones: clean (green), change (yellow), or dirty (red). The Series PFG is perfectly suited for filter applications, line loss, valve drop, and many other differential pressure applications where a simple indicator is needed.
Listed Under: Differential Pressure Gauges
Model 7424 RJ45 A/B/C/D Switch with Serial Remote Control Port
Electro Standards Laboratories, Cranston, RI
3 Apr 2009 — Electro Standards Laboratories (ESL) has announced the new Pathway® Model 7424 RJ45 A/B/C/D Switch that provides 4-port switching in a low profile unit. The Model 7424 allows sharing a single RJ45 interface device connected to the Common port among four other devices connected to the A, B, C, and D ports. This flexible network switch may be controlled manually by simply pressing and holding the front panel pushbutton. Remotely control the switch, query switch position or lockout front panel controls via the RS232 interface using ASCII commands. All 8 leads of the RJ45 interface are switched and switch ports are transparent to all data. All switched signals are passed via dependable copper contact relays that maintain their position and continuity in the event of a power loss.
Listed Under: Network Switches
Large Volume, High Pressure Griffin 3 Stage Water-Jet Pumps
Griffin Dewatering, Houston, TX
1 Apr 2009 — Griffin Pump and Equipment Inc., offers pumps capable of delivering flow over 1,400 gpm and head conditions up to 900 ft. and come equipped with hand-operated diaphragm primers as standard, but can be equipped for automatic priming. Griffin jet pumps are an ideal solution for pile and caisson jetting, field installation of well casings without digging or drilling, oil pipe line testing, water supply, fire protection, pipeline cleaning, mining or a variety of other applications that require high flow and high pressure.
Listed Under: Pumps
Dwyer Instruments, Inc., Michigan City, IN
26 Mar 2009 — Dwyer Instruments, Inc., has announced the release of its NEW MODEL HTDL-10 HIGH TEMPERATURE DATA LOGGER. The HTDL-10 can handle being placed in conditions of extreme heat of up to 302°F (150°C). This submersible and portable data logger can record over 32,000 measurements and has a 2 inch rigid external probe to ensure fast and accurate temperature readings. The easy to use DL700 software makes retrieving data simple. The HTDL-10 can easily be started and stopped from a PC or delayed to start up to six months in advance.
Listed Under: Data Loggers
- HOME
- COMPANY NEWS
- INDUSTRY & GOVERNMENT NEWS
- PRODUCT NEWS
Submit Press Release
