Electro Standards Laboratories | Cranston, RI |
| |||||||||
* Click on an image to enlarge it in a new window * | |||||||||
QuickSwitch® 4187 ST Duplex A/B 100BaseFX AB Switch with Remote Access QuickSwitch® 4187 ST Duplex A/B 100BaseFX AB Switch with Remote Access can access either of two Fiber Optic 100BaseFX ports from a 100BaseFX "COMMON" port. The switch is fully compliant with the 802.3u 100BaseFX standard. Model 4187 QuickSwitch® Fiber Optic Switch Features: Access either of two separate fiber optic 100BaseFX ports from a 100BaseFX COMMON port. The switch is fully compliant with the 802.3u 100BaseFX standard. Manual control by the front panel pushbutton. Remote control via RS232 (DB9) serial port. Switch position displayed on front panel LED or on computer terminal via remote port. Switch Position Memory: In the event of a temporary power failure, the switch will return to the last ordered position when power is restored. Data will not pass through the unit during power loss. Switch Control: The switch position may be controlled manually via a front panel pushbutton, or remotely from an RS-232 serial port located on the rear of the unit. To switch manually, simply depress the front panel pushbutton and the switch will change to the new selected position as indicated by the front panel LED's. Remote switching of the unit is done through an RS-232 (DB-9) serial port located on the rear of the QuickSwitch® 4187, which may be connected to any standard RS-232 port on a computer. The computer, once connected to the remote port, may use any common terminal emulation software. QuickSwitch® Specifications: 100BaseFX A/B PORTS: Ports "A" and "B" are 1300nm, ST Duplex, Multimode, 100 BaseFX fiber optic ports. The selected port will pass data to and from the Common port. 100BaseFX COMMON PORT: The Common Port is a 1300nm, ST Duplex, Multimode, 100BaseFX fiber optic port. The Common will pass data to and from the selected port "A" or "B". CONTROLS: Manual pushbutton or via remote DB9 RS-232 serial port. DISPLAY: Front panel LED or computer terminal via remote port. POWER: 115 VAC / 60 Hz, wall mount supply DIMENSIONS: 3" H x 8" D x 8" W WEIGHT: 2.8 lbs. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=263 | |||||||||
QuickSwitch® 4189 4-Way Fiber Optic Switch/Converter QuickSwitch® 4189 4-Way Fiber Optic Switch/Converter can access any one of four separate fiber optic networks from one computer. QuickSwitch® 4189 Features: Access any one of four separate fiber optic networks from one computer. Simple pushbutton switching. Network ports 1 & 2 are 850nm 10 Mbps ST duplex multimode fiber optic ports. Network ports 3 & 4 are 1300nm 100 Mbps ST duplex multimode fiber optic ports. ST duplex shown. SC is available. Based on the selected port, the COMMON port will automatically convert to the proper 10 BASE-T or 100 BASE-T speed. Internal circuitry insures isolation between networks/devices. Acts as a signal source, no optical signal loss. LED display indicates switch position and fiber link presence. Spare power supply available, P/N 520943. QuickSwitch® Specifications: CONNECTORS: Ports 1, 2 are 10 Base FL fiber optic ports, dual ST; ports 3, 4 are 100 Base FX fiber optic ST duplex ports; COMMON port is 10/100 Base-TX, RJ45. FIBER OPTIC PORT INTERFACE: Ports 1, 2 are 850 nm, speed 10 Mbps, full duplex; Ports 3,4 are 1300 nm, speed 100 Mbps, full duplex CONTROLS: (4) Pushbuttons to select network port. DISPLAY: (4) Status red LED's; (4) Link red LED's. POWER: UL approved 110-240VAC / 47-63Hz wall mount power module supplies power to the unit, P/N 520943 DIMENSIONS: 11" W x 2.7" H x 8.5" D, wt. 3 lbs. This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=127 | |||||||||
The QuickSwitch® 4196 SC Duplex A/B/C/D/OFF-LINE Switch, All Optic Switch with Remote The QuickSwitch® 4196 SC Duplex A/B/C/D/OFF-LINE Switch allows a fiber optic device connected to the SC Duplex COMMON connector of the unit to access any of the four fiber optic networks connected to the A, B, C, or D ports or to disconnect completely from all output ports. The switch postion can be changed either by depressing the desired front panel A, B, C, D or Off-Line pushbuttons, or by a device connected to the Remote port located on the rear panel. Applying the appropriate voltage to designated pins of the Remote connector will cause the switch to change position. The QuickSwitch® 4196 dimensions are 19"W x 1.75" H x 10" D. QuickSwitch® 4196 Features: Allows access to four networks from one computer or workstation. CUTOFF switch position stops any and all data throughout for the unit. MEMS-based mirror/prism switch technology supports Gigibit data rates. Service protocol transparent. Bit-rate and data transparent. Optical data throughput scalability. All fiber ports are SC duplex, multimode, 62.5/125 micron and support a wavelength of 1300 nm. Local control via front-panel pushbuttons. Remote control port allows off-site monitoring and switch management via voltage signaling. Front-panel LED's display switch position and power status. When power is lost, unit reverts to the Off-Line position. When power is restored, unit automatically switches based on remote port voltage control. Municipalities, schools, government: On GSA Schedule! Specifications: CONNECTORS: (5) SC Duplex connectors labeled, A, B, C, D and COMMON. FIBER OPTIC INTERFACE: Wavelength: 1300 nm, Multimode, 62.5/125 Microns. FRONT PANEL CONTROLS: (5) Front-panel pushbuttons, allow local switching to A/B/C/D, and OFF-LINE. REMOTE: (1) DB9 female connector on rear panel accepts 24 VDC signaling. DISPLAY: (5) Front panel red LEDs display switch position and power status. POWER: UL approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit. DIMENSIONS: Rackmount Configuration: 19" W x 1.75" H x 10" D. (48.3 x 4.4 x 25.4 cm) WEIGHT: Approximately 5.5 lbs. (2.5 kg) Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=16 | |||||||||
QuickSwitch® 4199 Gigabit Fiber Optic A/B/C/D Switch/Converter, SC Multimode, Mirror Switch QuickSwitch® 4199 allows a Cat 5e device connected to the unit's COMMON connector to access any of the four fiber optic networks connected to the A, B, C, or D ports. Switch position can be changed via A/B/C/D front panel pushbuttons. QuickSwitch® 4199 Fiber Optic Switch / Converter Features: Optical Scalability. Bit-Rate Transparent. Service/Protocol Transparent. Supports the sharing of a single Gigabyte Ethernet CAT 5e RJ45 COMMON port or device among four SC Duplex fiber optic interface devices or networks,62.5 µm. A/B/C/D ports are completely isolated from each other during switching, providing a safe and secure environment. Local switching is accomplished by depressing any of the front-panel pushbuttons. LED indicators display switch position and power status. No Remote Control. Rackmount configuration is optionally available. Specifications: CONNECTORS: (4) SC Duplex Fiber Optic rear-panel connectors, A/B/C/D (1) RJ45 COMMON connector. FIBER OPTIC INTERFACE: Wavelength 1300 nm, Multimode, 62.5/125 Microns. CONTROLS: (4) Front-panel Pushbuttons, A/B/C/D. DISPLAY: (4) Front-panel red LED's display switch position and power status. POWER: UL approved wall mount power module, Input: 120V AC / 60 Hz, 10 W, Output: 12V DC 500mA, Class 2 Transformer. DIMENSIONS: 3.5" H x 8" d x 16.75" WDesktop Chassis. This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=17 | |||||||||
QuickSwitch® 4289 4-Way Fiber Optic Switch/Converter QuickSwitch® 4289 4-Way Fiber Optic Switch/Converter can access any one of four separate fiber optic networks from one computer. QuickSwitch® 4289 allows user to access any one of four separate fiber otpic network ports, 1,2 3, or 4, from a computer connected to the COMMON 100 Base-TX port. All ports are 1300 nm 100Mbps ST duplex multimode fiber optic ports. Customized configurations are available. QuickSwitch® 4289 is controlled from the front panel pushbutton switches. Front panel control is as simple as depressing the button of the desired network port. LED indicators display the switch position status, as well as the presence of fiber optic link. QuickSwitch® 4289 Features: Access any one of four separate fiber optic networks from one computer. Simple pushbutton switching. All four network ports are 1300nm 100 Mbps ST multimode fiber optic ports. (SC duplex is available). Internal circuitry insures isolation between networks/devices. Acts as a signal source, no optical signal loss. LED display indicates switch position and fiber link presence at a glance. QuickSwitch® Specifications: CONNECTORS: Ports 1, 2, 3, 4 are 100 Base FX fiber optic ST duplex ports. COMMON port is 10/100 Base-TX RJ45. FIBER OPTIC PORT INTERFACE: Ports 1, 2, 3, 4 are 1300nm, speed 100 Mbps, full duplex CONTROLS: (4) Pushbuttons to select network port. DISPLAY: (4) Status red LED's; (4) Link red LED's. POWER: 115 VAC/60HZ wall mount supply. DIMENSIONS: 11" W x 2.7" h x 8.5" D, . WEIGHT: 3 lbs This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=126 | |||||||||
QuickSwitch® 4294 4-Way All-Optic Simplex Fiber Switch with Threaded FC Connectors, 100/140 Graded Index Fiber, UPC. QuickSwitch® 4294 Remotely Controllable FC Simplex A/B/C/D, all optical network switch, is designed with fiber optic mirror technology. The signal is received by the unit as an optical signal over the fiber strand, is redirected by mirror mechanisms, and leaves the unit as an optical signal over a fiber strand (OOO). Optimum wavelength is 1300 nm. QuickSwitch® 4294 allows a fiber optic device connected to the unit's FC Simplex COMMON connector to access any of the four fiber optic networks connected to the A, B, C or D ports. Switch position can be changed via the front-panel pushbutton, or from an RS232 Serial Remote Port located on the rear panel. QuickSwitch® 4294 Operation: QuickSwitch® 4294's FC Simplex ports are transparent to all data. Front-panel LEDs indicate the switch position. Position status can also be ascertained from the Remote port connector. Remote switching is accomplished via the RS232 Serial Remote port located on the M4294 rear panel. The QuickSwitch® 4294 has Switch Position Memory. When power is lost, the QuickSwitch® 4294 automatically changes to its default position and will continue to pass data. QuickSwitch® 4294 Features: Optical Scalability. Bit-Rate and Data Transparent. Service/Protocol Transparent. A/B/C/D/COMMON FC Simplex, UPC, not angle polished Rear-Panel Connectors. Fiber Strand interface: 100/140 micrometer graded index multimode fiber. Front-Panel Pushbutton selects A, B, C, or D positions. Front-panel LEDs display switch positions and power status. Remote control via RS232 serial remote port on rear panel. MEMS-Based Multimode Mirror Switch supports Gigabit data rates. Specifications: WAVELENGTH: Optimum at 1300 nm. CONNECTORS: (5) FC Simplex Fiber Optic rear-panel connectors, A/B/C/D/COMMON. CONTROLS: (1) Front-panel pushbutton selects A/B/C/D. DISPLAY: (4) Front-panel red LEDs display switch position and power status. POWER: UL approved, 120VAC / 60 Hz wall mount supply. DIMENSIONS: 1.75" H x 8" D x 19 "W Fits standards 19: rack . Additional Info: http://www.electrostandards.com/ProductDetail/?productid=124 | |||||||||
Model 5150 Keylock Video Conference Room Secure Switching System Model 5150 Keylock Video Conference Room Secure Switching System The Model 5150 System consists of: Model 5008 Display Indicator, Model 5200 Fiber Optic Switch, Model 5502 Ethernet Switch, Model 5503 Telco Switch, and Model 5504 ISDN Switch. In the Non-Secure mode the system passes the connection of copper and fiber voice and data lines from the conference room equipment to the building data network. In the Secure mode, the system disconnects the same set of lines from the building data network, isolating al of the conference room equipment completely. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=110 | |||||||||
QuickSwitch® 6257 Quad Channel All-Optic Fiber Optic A/B Switch Multimode ST Duplex 62.5 Micron with Remote Control Port QuickSwitch® 6257 Quad Channel Fiber Optic AB Switch allows devices connected to COMMON port of each channel access to the A or B port on each channel. All channels are switched simultaneously. The QuickSwitch® 6257 Fiber Optic switch is enclosed in a standard 2U rack mount casing. The dimensions are 19"W x 3.5"H x 8"D and the unit weighs approximately 10 lbs. The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9 Custom Remote Control port located on the rear of the unit. The DB9 Remote port provides control by signal transition logic and allows the user to both control and monitor switch position remotely. The front panel LED display indicates all of the switch positions and unit power status. Features: Fiber switch employs mirror technology. Wavelength: 1300 nm The switch ports are transparent to all data. Switch maintains position on power loss and continues to pass data. Front-panel pushbutton control. Remote control via the custom remote port. Remote ports allow switch position monitoring. Front panel LED's for display of current position of all channels as well as the power status. All A, B and COMMON ports are ST Duplex, Multimode 62.5/125 µm. Custom length ST Duplex cables available. QuickSwitch® Specifications: PORT CONNECTORS: (24) fiber optic connector array provides A, B,and COMMON connector to each of 4 channels. REMOTE PORT: DB-9 female connector on rear panel accepts transition signals for remote operation. POWER: UL Approved wall mount power module, 120 VAC / 60 Hz supplies 12 VDC, 500 mA to the unit. DISPLAY: (2) Red, front panel LEDs' indicate switch position, status, and power. CONTROL: (1) Pushbutton control, front panel allows local switching. DIMENSIONS: Rackmount Configuration 19.0" W x 3.5" H x 8"D WEIGHT: Approx. 10 lbs. Wide Range Power Option Available: (Cat No 517277) CE and UL listed wall mount power module, 100 VAC/240 VAC, 50Hz/60Hz in place of standard 115 VAC or 120 VAC power module. Ideal for international applications. This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=264 | |||||||||
QuickSwitch® 6270 Fiber Optic SC Duplex A/B Mirror Switch with Remote Serial Control QuickSwitch® 6270 AB Fiber Optic Network Switch enables a device connected to the COMMON port to access either of two separate Fiber Optic networks via SC duplex ports. Model 6270 utilizes MEMS-based (Micro Electro Mechanical System) multimode switches. The switch position of the Model 6270 can be controlled manually via a front panel pushbutton or remotely using the rear-panel RS-232 serial port. Once connected to the remote port, the computer can use any common terminal emulation software to manipulate the controls and monitor the switch position. Model 6270 QuickSwitch Fiber Optic Switch Features: Access either of two SC Duplex Fiber Optic networks from one computer connected to an SC Duplex COMMON port. MEMS-based (Micro Electro Mechanical System) multimode mirror switch, 850nm. Manual control by the front panel pushbutton. Remote control via RS-232 (DB9) serial port. Switch position displayed on front panel LED or on computer terminal via remote port. Insertion losses are less than 1.0 dB. The switched Fiber Optic SC Duplex ports are transparent to data and speed. In the event of a power failure, The M6270 A/B fiber optic network switch will remain in its current position and continue to allow the unit to pass data. QuickSwitch® Specifications: CONNECTORS: Ports A, B and COMMON are Fiber Optic SC duplex ports. WAVELENGTH: 850 nm. FIBER OPTIC PORT INTERFACE: Ports A, B and COMMON are fiber optic SC duplex multimode 62.5 micron ports that accept standard fiber SC duplex connectors. REMOTE PORT INTERFACE: RS-232 (DB9) serial port, 9600 bps, located on rear of unit, may be connected to any standards RS-232 port of a computer. CONTROLS: Manual pushbutton or via remote DB9 RS-232 serial port. DISPLAY: Front panel LED or computer terminal via remote port. POWER: UL approved, 120VAC / 60Hz wall mount supply, included with the unit. DIMENSIONS: 1.75" H X 8" D X 19" W WEIGHT: 4.5 lbs Additional Info: http://www.electrostandards.com/ProductDetail/?productid=117 | |||||||||
QuickSwitch® 6284 Fiber Optic ESCON A/B Mirror Switch with Remote Control Electro Standards Laboratories' QuickSwitch® 6284 enables a device connected to the COMMON port to access either two separate Fiber Optic networks via duplex ports. This cutting-edge switch utilizes MEMS-based (Micro Electro Mechanical System) multimode switches. The switch position of the QuickSwitch® 6284 can be controlled manually via a front panel pushbutton or remotely using the RS-232 serial port located on the rear of the unit. Once connected to the remote port, the computer can use any common terminal emulation software to manipulate the controls and monitor the switch position. QuickSwitch® Fiber Optic Network Switch Features: Access either of two ESCON Fiber Optic networks from one computer connected to an ESCON COMMON port. MEMS-based (Micro Electro Mechanical System) 1300nm multimode mirror switch, 62.5/125 micron. Manual control by front-panel pushbutton. Remote control through RS-232 (DB9) serial port. Switch position displayed on front panel LED or on computer terminal via remote port. Insertion losses are less than 1.0 dB. The switched Fiber Optic ESCON ports are transparent to all data. The M6284 A/B switch retains its current position in the event of a power failure. QuickSwitch® 6284 Specifications: CONNECTORS: Ports A, B and COMMON are Fiber Optic ESCON duplex ports. FIBER OPTIC PORT INTERFACE: Ports A, B and COMMON are fiber optic ESCON duplex ports that accept standard fiber optic ESCON duplex connectors. REMOTE PORT INTERFACE: RS-232 (DB9) serial port, 9600 Bps, locatedon rear of unit, may be connected to any standard RS-232 port or computer. CONTROLS: Manual pushbutton or via remote DB9 RS-232 serial port. DISPLAY: Front panel LED or computer terminal via remote port. POWER: 115 VAC / 60 Hz, wall mount supply DIMENSIONS: 3" H x 8" D x 8" W WEIGHT: 2.8 lbs. ESCON: (Enterprise Systems Connection) is an optical serial interface between IBM mainframe computers and periperal devices such as storage and tape drives. ESCON is capable of half-duplex communication at a rate of 16 MB/second over distances of up to 43 kilometers. This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=121 | |||||||||
QuickSwitch® 6290 Fiber Optic Mirror A/B Switch, SC Duplex, Single Mode with Remote QuickSwitch® 6290 is a fiber optic Single Mode SC Duplex Interface A/B Switch with a Secure Remote Access. The Model 6290 allows the user the capability of accessing two separate Fiber Optic Networks or devices, ports A and B, via connection through a network device connected to the Common port. The SC Duplex fiber switch employs Micro Electro Mechanical System (MEMS) based single mode switches. Insertion losses are less than 1.0 dB. The switch may be controlled manually via a front panel pushbutton or remotely from an RS232 serial port (DB9) located on the rear of the unit. Switch position status may be attained via the front panel LED display of the remote RS-232 serial port (DB9) located on the rear of the unit. If power to the Model 6290 is lost, the switch will maintain its position and continue to pass data. The front panel LED's display the current switch position and power status of the Model 6290. The A, B, and Common ports of the Model 6290 are Fiber Optic Single Mode SC Duplex ports that accept standard Fiber Optic SC duplex connectors. Features: Optical Scalability. Bit-Rate Transparent. Service/Protocol Transparent. A/B COMMON SC Duplex Fiber Optic Rear-Panel Connectors. A/B Front-Panel Pushbutton. Front-Panel LEDs Display Switch Position and Power Status. Remote Control via RS-232 (DB9) Serial Remote Port. MEMS-Based Single Mode Mirror Switch provides Gigabyte data rate. Specifications: CONNECTORS: (3) Single Mode SC Duplex rear panel connectors A, B, and COMMON. CONTROLS: (1) Front Panel Pushbutton to select port A or B. DISPLAY: (2) Red LEDs display switch position and indicate power presence. SUPERVISORY REMOTE PORT: (1) DB9/female serial RS232 port. POWER: UL approved 110/120VAC, 60HZ wall mount power module supplied with unit. DIMENSIONS: 3" H x 8" W x 8" D. WEIGHT: 2.8lbs. STANDARD CONFIGURATION: Desktop WAVELENGTH: 1300 nm FIBER SIZE: 9/125/900 Additional Info: http://www.electrostandards.com/ProductDetail/?productid=119 | |||||||||
QuickSwitch® 4192 Fiber Optic SC Duplex A/B/C/D/Off-Line Switch, with Remote, Rackmount The QuickSwitch® 4192 fiber optic network switch allows a fiber optic device connected to the SC duplex COMMON connector of the unit to access any of four fiber optic networks connected to the A, B, C or D ports, or to disconnect completely from all output ports. The switch position can be changed either by depressing the desired front panel A/B/C/D/Off-Line pushbuttons, or by a device connected to the Remote port. Applying appropriate voltage to designated pins of the Remote connector will cause the switch to change position. Model 4192 QuickSwitch Fiber Optic Switch Features: Access any one of four separate fiber optic networks from one computer. Local control via five Front panel pushbuttons, A/B/C/D, and OFF-LINE. Front panel LED's display switch position and power status. Remote Control via voltage excitation applied to designated pins of the DB9/Female Remote port connector. MEMS-based mirror/prism switch technology supports Gigabit data rates. Bit-rate and data transparent. Optical data throughput scalability. All fiber ports are SC duplex, multimode, 62.5/125 micron and support a wavelength of 850 nm. OFF-LINE switch position stops any and all data throughput for the unit. If power is lost, the unit will automatically switch to the OFF-LINE position and decouple all fiber optic connection in and out of the unit. When power is restored, the unit will automatically read the voltages on the Remote port and look to the pushbutton activity to select its switch position. Installs in standard 19" equipment rack. Custom length, rigorously tested and certified, SC Duplex fiber optic cables available for your switch installation. Specifications: PORT CONNECTORS: (5) SC Duplex Fiber Optic connectors on rear panel, A, B, C, D, and COMMON. FRONT PANEL CONTROLS: (5) pushbuttons allow switch selection A, B, C, D or Off-Line. DISPLAY: (5) Front panel LED's display switch position and power status. REMOTE: (1) DB9 female connector on rear panel accepts voltage excitation remote control signals. POWER: UL approved wall mount 120VAC, 60Hz power module supplies 12 VDC, 500 mA to the unit. DIMENSIONS: Rackmount configuration 19" W x 3.5" H x 8" D. (48.3 x 8.9 x 20.3 cm) WEIGHT: Approximately 5 lbs. (2.3 kg) This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=116 | |||||||||
QuickSwitch® 6282 Fiber Optic Mirror A/B Switch, 850nm SC Duplex, Multimode with Secure Remote Access QuickSwitch® 6282 Fiber Optic SC Duplex AB Switch with 850 nm and Remote allows the user the capability of accessing two separate Fiber Optic networks or devices, ports A & B, via connection through a network or device connected to the Common port. The Quick-Switch® 6282 employs Micro Electro Mechanical System (MEMS) based multi-mode switches. Insertion losses are less than 2.5 dB. The Model 6282 supports gigabit network switching. The switch may be controlled manually via front panel pushbutton or remotely from an RS-232 serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS-232 serial port (DB9) located on the rear of the unit. If power to the QuickSwitch® 6282 is lost, the switch will maintain its current position and continue to pass data. Model 6282 QuickSwitch Fiber Optic Switch Features: Wavelength: 850 nm. Optical Scalability. Bit-Rate Transparent. Service/Protocol Transparent. A, B and COMMON ports are SC Duplex Multimode, 62.5/125 µm and support a wavelength of 850 nm. A/B Front-Panel Pushbutton. Front-Panel Tri-State LEDs Display Switch Position. Remote Control via RS232 (DB9) serial port with the M6282 A/B Switch Remote access is password protected. MEMS-based Multimode Mirror Switch provides Gigabyte Network Switching. QuickSwitch® Specifications: WAVELENGTH: 850 nanometers. PORT CONNECTORS: (3) SC Duplex, multimode, 62.15/125µm on rear-panel labeled A, B, and COMMON. CONTROLS: (1) Front-panel Pushbutton, to select A or B and indicate power presence. DISPLAY: (2) Front-panel Tri-State LEDs display switch position A or B SUPERVISORY REMOTE PORT: (1) DB9/female serial RS-232 port. POWER: UL approved 120VAC, 60Hz wall mount power module supplies 12VDC, 500mA to the unit. DIMENSIONS: 3"H x 8"D x 8"W WEIGHT: 2.8 lbs. STANDARD CONFIGURATION: Desktop This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=27 | |||||||||
QuickSwitch® 6289 Fiber Optic ST Duplex A/B Switch with Contact Control Remote Port and Gigabit Data Rate Remote controlled switching via contact closure device or custom designed "Toggle Switch Cable." The Model 6289 Fiber Optic Gigabit ST Duplex A/B Switch allows a device connected to COMMON port access to the A or B port. The switch may be controlled locally by manually operating the front panel pushbutton(s) or remotely from a remote toggle switch (ESL Cable p/n 986479) connected to the DB9 female interface Remote port located on the rear of the unit. The front panel LED display indicates the switch position and unit power status. Model 6289 QuickSwitch® Fiber Optic Switch Features: Manual control via pushbutton. Remote control through a remote toggle switch (ESL P/N 986479) connected to the DB9 Remote port located on the rear panel. Switch position displayed on front panel LEDs. The switched Fiber Optic ST Duplex ports are transparent to all data. The switch keeps synchronized with the remotely located toggle switch by monitoring the Remote Port for changes in the toggle switch position. MEMS-Based 850 nm Mirror Switch supports Gigabyte data rate. QuickSwitch® Specifications: PORT CONNECTORS: (3) fiber optic ST duplex multimode connectors labeled A, B, and COMMON are located on rear panel. PORT INTERFACE: Ports A, B, and COMMON accept fiber optic ST duplex multimode signals and cables. Fiber Size: 62.5/125 micron REMOTE:(1) DB9 (F) connector on rear panel accepts contact closure from customer equipment or from ESL Remote Control Cable having a toggle switch at far end and DB9 (M) at near end. (ESL Catalog # 986479) CONTROLS: (1) Pushbutton on front panel, allows switching to state A or B. DISPLAY: (2) LED's on front panel indicated switch status and power presence. Power: UL approved 120 VAC/60 Hz wall mount power module supplies 12VDC, 500mA to the unit. DIMENSIONS: 3" H x 8" D x 8" W. WEIGHT: 2.8 lbs. WAVELENGTH: 850 nm. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=262 | |||||||||
The QuickSwitch® 6287 Fiber Optic Multimode SC Duplex AB Switch with 10/100 BASE-T LAN Access The QuickSwitch® 6287 Fiber Optic Multimode SC Duplex AB Switch with 10/100 BASE-T LAN Access allows the user the capability of accessing two separate Fiber Optic networks or devices, ports A & B, via connection through a network or device connected to the COMMON port. The Model 6287 employs Micro Electro Mechanical System (MEMS) based multimode switches. Switch position status may be attained via front panel LEDs or the remote Graphical User Interface software via the Remote LAN port. MANUAL/LOCAL OPERATION Manual control is accomplished by simply depressing and releasing the front panel pushbutton to change the switch position. On the front of the switch are the following controls and indicators. A, B INDICATORS - LED'S indicate the switch position of each channel. The LED's in the steady state indicate the position of the switch. A green LED indicates the current switch position while a red LED indicates the unselected position. QuickSwitch® 6287 Features: MEMS-Based mirror/prism switch technology supports Gigabit data rates. Insertion losses are less than 1.0 dB. Bit-rate and data transparent. All fiber ports are SC duplex, multimode, 62.5/125 micron and support a wavelength of 850 nm. Local control via front-panel pushbutton. Remote control TELNET command interface allows the user to control switch position and monitor switch status. IP addressable. Control the switch position from a 10/100 Base-T LAN Ethernet Environment. Front-panel LED's display switch position and power status. If power is lost, switch will default to the A position (prime) and continue to pass data. Customer length, rigorously tested and certified, SC fiber optic cables available for your switch installation. QuickSwitch® Specifications: PORT CONNECTORS: A, B, and COMMON are Fiber Optic Multimode SC duplex. CONTROL: (1) Pushbutton control, front panel allows local switching. REMOTE PORT: RJ-45 jack, accepts 10/100 BASE-T LAN access Ethernet for Remote Control. POWER: Wide Range Power Module (Cat No 517277) CE and UL listed table mount power module, 100 VAC / 240VAC, 50Hz/60Hz is included with the unit. Ideal for international applications. DISPLAY: (2) Tri-State front panel LEDs' indicate switch position, status, and power. WAVELENGTH: 850 nm. FIBER SIZE: 62.5/125. DIMENSIONS: Desktop, 2.4 " H x 8.0 " W x 7.25 " D WEIGHT: 2.5 lbs. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=118 | |||||||||
QuickSwitch® 6286 Fiber Optic Mirror A/B Switch, 1300nm SC Duplex, Multimode with Remote The QuickSwitch® 6286 AB Fiber Optic Switch allows a fiber optic device connected to the unit's SC Duplex COMMON connector to access either of the two fiber optic networks connected to the A, B ports. Model 6286 supports Gigabit data rate network switching! QuickSwitch® 6286 Features: QuickSwitch® 6286 fiber optic data switch is designed with fiber optic mirror technology. Signal is received by the unit as an optical signal over the fiber strand, is redirected by mirror mechanisms, and leaves the unit as an optical signal over a fiber strand (OOO). Model 6286 allows a fiber optic device connected to the unit's SC Duplex COMMON connector to access either of the two fiber optic networks connected to the A, B ports. Wavelength: 1300 nm. Optical Scalability. Bit-rate transparent. Service/Protocol transparent. A, B and COMMON SC Duplex fiber Optic rear-panel connectors. A/B front-panel pushbutton. Front-panel LEDs display switch position. Remote control via RS232 (DB9) serial port. MEMS-Based Multimode Mirror Switch provides Gigabyte Network Switching. For a similar switch with a Keylock, see Model 6286K Cat No. (306186K). QuickSwitch® Specifications: WAVELENGTH: 1300 nanometers. CONNECTORS: (3) SC Duplex Fiber Optic rear-panel connectors, A, B, and COMMON. CONTROLS: (1) Front-panel Pushbutton, A and B. DISPLAY: (2) Front-panel red LEDs display switch position A or B POWER: 120VAC / 60Ha wall mount supply DIMENSIONS: 3" H x 8" D x 8" W WEIGHT: 2.8 lbs. STANDARD CONFIGURATION: Desktop. This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=28 | |||||||||
QuickSwitch® 6285 Gigabit Fiber Optic Mirror Switch / Converter with Remote Control QuickSwitch® 6285 AB Switch enables a device connected to the Gigabit 1000-Base-T RJ45 COMMON port to access either of two separate fiber optic networks via SC Duplex ports. This cutting-edge switch utilizes MEMS-based (Micro Electro Mechanical System) multimode switches and high-speed fiber optic / copper 1000-Base-T converter electronics. The switch position of the QuickSwitch 6285 can be controlled manually via a front panel pushbutton or remotely using the RS232 serial port located on the rear of the unit. Once connected to the REMOTE port, the computer can use and common terminal emulation software to manipulate the control and monitor the switch position. QuickSwitch® 6285 Fiber Optic Network Switch Features: Access either of two Fiber Optic Networks from one computer connected to a Gigabit Ethernet (GigE) RJ45 COMMON port MEMS-based (Micro Electro Mechanical System) multimode mirror switch, wavelength 850 nm High speed fiber optic/copper 1000-Base-T converter electronics Manual Control via front panel pushbutton Remote control through RS-232 (DB9) serial port Switch position displayed on front panel LED or on computer terminal via remote port QuickSwitch® Specifications: CONNECTORS: Ports A and B are Fiber Optic SC duplex ports; COMMON Port is 1000-Base-T RJ45. FIBER OPTIC INTERFACE: Ports A & B are fiber optic SC duplex ports that accept standard fiber optic SC duplex connectors. WAVELENGTH: 850 nanometers. COMMON PORT INTERFACE: The Common port is an RJ-45 GigE interface that accepts standard CAT5e patchcords. REMOTE PORT INTERFACE: RS-232 (DB9) serial port, located on rear of unit, may be connected to any standard RS-232 port or computer. CONTROLS: Manual pushbutton or via remote DB9 RS-232 serial port. DISPLAY: Front panel LED or computer terminal via remote port. POWER: 115 VAC / 60 Hz, wall mount supply DIMENSIONS: 3" H x 8" D x 8" W WEIGHT: 2.8 lbs. This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=125 | |||||||||
QuickSwitch® 6271 Fiber Optic SC Duplex A/B Mirror Switch with Remote Serial Control QuickSwitch® 6271 QuickSwitch® 6271 AB Switch enables a device connected to the COMMON port to access either of two separate Fiber Optic networks via SC Duplex ports. Model 6271 QuickSwitch Fiber Optic Switch Features: Access either of two SC Duplex Fiber Optic networks from one computer connected to an SC Duplex COMMON port. MEMS-based (Micro Electro Mechanical System) multimode mirror switch, 1300 nm. Manual control via front-panel pushbutton. Remote control via RS232 (DB9) serial port. Switch position displayed on front panel LED or on computer terminal via remote port. Insertion losses are less than 1.0 dB. The switched Fiber Optic SC Duplex ports are transparent to data and speed. The M6271 A/B switch retains its current position in the event of a power failure. QuickSwitch® Specifications: CONNECTORS: Ports A, B and COMMON are Fiber Optic SC duplex ports. WAVELENGTH: 1300 nm. FIBER OPTIC PORT INTERFACE: Ports A, B and COMMON are fiber optic SC duplex multimode 62.5 micron ports that accept standard fiber SC duplex connectors. REMOTE PORT INTERFACE: RS -232 (DB9) serial port, 9600 bps, located on rear of unit, may be connected to any standards RS-232 port of a computer. CONTROLS: Manual pushbutton or via Remote DB9 RS-232 serial port. DISPLAY: Front panel LED or computer terminal via remote port. POWER: UL approved, 115 VAC / 60Hz wall mount supply, included with the unit. DIMENSIONS: 1.75" H X 8" D X 19" W WEIGHT: 4.5 lbs For an 850 nm version of this switch, see Related Products, QuickSwitch 6270. This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=268 | |||||||||
QuickSwitch® 6264 Six-Channel Fiber Optic A/B Switch, LC Duplex with 10/100 Base-T LAN TELNET Access QuickSwitch® 6264 Six-Channel Fiber Optic AB Switch allows devices connected to the "COMMON" port of each channel to access the "A" or "B" port on each channel. All channels are switched simultaneously. Switching may be accomplished locally by front panel control, or remotely using an Ethernet 10/100 Base-T connection and Telnet commands. The front panel LED's display switch position, status and power. Model 6264 QuickSwitch Fiber Optic Network Switch Features: QuickSwitch® 6264 Six-Channel fiber optic network switch allows devices connected to the "COMMON" port of each channel to access the "A" or "B" port on each channel. Manual control via the front panel pushbutton. Remote control using an Ethernet 10/100 Base-T connection and TELNET commands. Switch ports are transparent to all data. All 6 channels switch simultaneously All fiber ports are LC Duplex, Multimode, 62.5/125 micron and support a wavelength of 850 nm. MEMS-based mirror/prism switch technology supports Gigabit data rates. Control of the switch locally or via REMOTE input that accepts 10/100 Base-T LAN Ethernet connection. Remote Telnet control allows switch status monitoring and front panel lockout. Retains last switch position even in the event of power loss and continues to pass data. Custom length, rigorously tested and certified, LC fiber optic cables available for your switch installation. IP Addressable. QuickSwitch® Specifications: PORT CONNECTORS: (18) LC duplex fiber optic connectors labeled A, B, and COM. (3 for each of the 6 channels). CONTROL: (1) Pushbutton control allows local switching. DISPLAY: (2) Red, front panel LEDs' indicate switch position, status, and power. REMOTE PORT: (1) RJ45 female connector accepts 10/100 Base-T LAN connection for remote control switching. POWER: UL Approved 120VAC, 60 Hz wall mount module supplies 12 VDC, 500 mA to the unit. WAVELENGTH: 850 nanometers. DIMENSIONS: Rackmount Configuration 19.0" W x 3.5 " H x 8" D FIBER SIZE: 62.5/125 Micron WEIGHT: Approximately 4.5 lbs. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1373 | |||||||||
QuickSwitch® 6195 All-Optic SC Duplex A/B/C/D Switch with Serial Remote Control QuickSwitch® 6195 SC Duplex A/B/C/D Fiber Optic Network Switch allows a fiber optic device connected to the SC duplex COMMON connector to access any of four fiber optic networks connected to the A/B/C/D ports. The switch position can be changed via the front panel pushbuttons, or by a device connected to the Remote port located on the rear panel. Model 6195 QuickSwitch Fiber Optic Switch Features: Model 6195 Switch allows access to up to four separate fiber optic networks from one computer. Internal circuitry insures isolation between networks/devices. All fiber ports are SC duplex, multimode, 50/125 micron and support a wavelength of 850nm. MEMS-based mirror/prism switch technology supports Gigabit data rates. Switching time is less than 1 msec. Bit-rate and data transparent. Optical data throughput scalability. Switch locally from front-panel pushbutton. DB9/Female RS232 REMOTE port. Remote control port allows off-site monitoring and switch management. The remote port accepts RS232 Serial Data commands for switch position control and monitoring. Front panel pushbutton control can be locked out remotely. Front panel LED's display switch position and power status. Retains last switch position in the event of power loss and continues to pass data. When power is restored, unit will power up in the "A" position. Custom length rigorously tested and certified SC fiber optic cables available for your switch installation. Power supply: 120 VAC, 60 Hz ( Note 120 VAC supply is not included if ordering the Optional Wide Range Power Supply) OPTIONAL WIDE RANGE POWER SUPPLY: (Cat. No. 517277) CE and UL listed table mount powr module, 100VAC-240VAC, 50Hz-60Hz can be ordered in place of the standard 115VAC or 120 VAC power module. Ideal for international applications. Specifications: PORT CONNECTORS: (5) SC Duplex Fiber Optic rear-panel connectors, A,B, C, D and COMMON. FRONT PANEL CONTROLS: (4) pushbuttons, allow switch selection A, B, C, D. DISPLAY: (4) Front panel LED's display switch posiition and power status. REMOTE: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial data for Remote Control operation. POWER: UL approved 120 VAC, 60 Hz wall mount power module supplies 12VDC, 500mA to the unit. FIBER SIZE: 50/125 micron WAVELENGTH: 850 nm DIMENSIONS: 3.5" H x 8" D x 19" W. (48.3 x 8.9 x 20.3 cm) WEIGHT: Approximately 5 lbs. (2.3 Kb) Specifications USB to DB9 Serial Converter Cable Available! If only USB ports are available on the computer or if a USB port is chosen to be used for any reason, a USB to DB9 serial converter cable will be needed. This cable can be provided by ESL under part number 514372. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=120 | |||||||||
QuickSwitch® 4185 Fiber Optic SC Duplex, Multimode Switch / Converter QuickSwitch® 4185 Fiber Optic SC Duplex, Multimode Switch / Converter allows the user the capability of accessing two separate fiber optic 100 Base FX ports (ports A and B) from a 100 Base TX Fast Ethernet port (Common port). The fiber optic / twisted pair copper conversion is built in! The unit is fully compliant with the 802.3u 100 Base TX/FX standard. QuickSwitch® 4185 Features: M4185 AB Switch/Converter allows access to two separate fiber optic 100 Base FX ports (A & B) from a 100 Base TX Fast Ethernet (COMMON) port. Fiber optic / twisted pair copper conversion is built in! Fully compliant with the 802.3u 100 Base TX/FX standard. Ports A & B are 1300nm, SC Duplex, Multimode, 100 Base FX fiber optic ports. The COMMON port is a 100 Base TX Fast Ethernet port. The selected fiber optic port will convert and pass data to and from the 100 Base TX COMMON port. Internal circuitry insures isolation between the A & B devices/networks. A great solution for conversion and fallback applications. The unit includes an RS232 Serial security enhanced Supervisory Remote Port. A front panel button changes the switch position eliminating the need to plug and unplug fiber patchcords thus minimizing connector wear. Switch position status is displayed on the front panel LEDs. The unit also includes an RS232 serial security enhanced Supervisory Remote Port. Upon proper authentication, a terminal or computer in terminal mode connected to this port can communicate with the unit, determine its status, change the switch position as desired, and/or lockout front panel switching capability. A modem can also be connected to this port for remote access to the switch. Access to the Supervisory Remote Port feature is password protected. An optional graphical user interface (GUI) software is also available for use with a computer running Windows operating system. Specifications: PORT CONNECTORS: (2) SC Duplex fiber optic connectors labeled A and B. (1) RJ45 100 Base-TX COMMON. FIBER OPTIC INTERFACE: 1300 nm, speed100 Mbps, multimode fiber, full duplex transmission, Fiber Size 62.5/125 micron. FRONT PANEL CONTROL: (1) Pushbutton to select port A or B. DISPLAY: (2) Red LEDs display switch position and indicate power presence. SUPERVISORY REMOTE: (1) DB9 / female connector on rear panel accepts ASCII RS-232 Serial Data for Remote Control operation. POWER: UL approved 115 VAC / 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit. DIMENSIONS: Desktop: 7.5" W x 2.0" H x 7"D WEIGHT: Approx. 2.8 lbs. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=105 | |||||||||
QuickSwitch® 4184 Fiber Optic SC Duplex 100BASE-FX A/B Switch with Remote Port QuickSwitch® 4184 Fiber Optic SC Duplex Interface AB Switch. It has a multimode duplex fiber connector interface on the A, B and COMMON ports. The switch connects a workstation or device between two other devices or networks. The internal circuitry insures isolation between the A and B devices / networks. A great solution for fallback network applications. A front panel button changes the switch position eliminating the need to plug and unplug fiber patchcords thus minimizing connector wear. Switch position status is displayed on the front panel LEDs. The unit also includes an RS232 Serial security enhanced Supervisory Remote port. Upon proper authentication, a terminal or computer in terminal mode connected to this port can communicate with the unit, determine its status, change switch position as desired, and / or lockout front panel switching cabability. A modem can also be connected to this port for remote access to the switch. Access to the Supervisory Remote Port feature is password protected. An optional Graphic User Interface (GUI) software is also available for use with a computer running Windows operating System. Model 4184 QuickSwitch® Fiber Optic Switch Features: QuickSwitch® 4184 fiber optic network switch allows quick connection to any one of two SC networks or devices from one COMMON device. The internal circuitry insures isolation between the A and B devices/networks. Service protocol transparent. Bit-rate and data transparent. Optical data throughput scalability. All fiber ports are SC duplex, multimode, 62.5/125 micron and support a wavelength of 1300 nm. Eliminates the need to plug and unplug cables. Local control via front-panel pushbutton. Remote control port allows off-site monitoring and switch management. The Remote port accepts RS232 Serial Data commands for switch position control and monitoring. Secure Setup/Configuration access limited by password protection. Front panel pushbutton control can be locked out, remotely. Ideal for fallback applications. Front-panel LED's display switch position and power status. Data will not pass through the unit during power loss. When power is restored, the unit will return to its previous position. Custom length rigorously tested and certified, SC Duplex fiber optic cables are available for your switch installation. Municipalities, schools, government: This product is on GSA Schedule! Specifications: PORT CONNECTORS: (3) SC Duplex fiber optic connectors labeled A, B, and COMMON. FIBER OPTIC INTERFACE: 1300 nm, speed 100 Mbps, multimode fiber, full duplex transmission, Fiber Size 62.5/125 micron. FRONT PANEL CONTROL: (1) Pushbutton to select port A or B. DISPLAY: (2) Red LEDs display switch position and indicate power presence. SUPERVISORY REMOTE: (1) DB9/female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation. POWER: UL approved 115 VAC / 60 Hz, wall mount power module supplies 12 VDC, 500 mA to the unit. DIMENSIONS: Desktop: 7.5"W x 2.0" H x 7" D. (19.1 x 5.1 x 17.8 cm) WEIGHT: Approx. 2.8 lbs. (1.3 Kg) Additional Info: http://www.electrostandards.com/ProductDetail/?productid=102 | |||||||||
The QuickSwitch® 4181 SC Duplex A/B 100BaseFX Auto Fallback Switch with Remote Access Auto FALLBACK Operation: The QuickSwitch® 4181 SC Duplex A/B 100BaseFX Auto Fallback Switch can operate in either of two modes, as a Fallback Switch or as an A/B Switch. In the Fallback mode, the unit monitors its environment for SD (signal detect) to determine its switch position. If the primary link is lost, the unit sends an alarm notification message; when the fiber link is restored, an acknowledgement message is also sent. In the A/B Switch mode, the unit can be switched from its front panel pushbutton, or remotely by communicating with the unit via its Remote Control Supervisory Port located on the rear panel. While in the Fallback mode, the unit will maintain connection from the Common port to port A while SD is present on the A port. If SD is absent or lost, the unit automatically switches to the fiber link connected to port B. Once SD has been restored and is sensed at port A, the switch automatically returns to the A position. The unit can be setup to respond differently to the loss and recovery of the primary fiber link A. FEATURES: Automatically detects faulty line and switches to a backup/secondary fiber optic network. Supports 100BaseFX fiber optic networks. All ports are SC Duplex multimode fiber optic ports. Sends alarm signal from RS232 port upon faulty line detection and recovery. Remote Control Supervisory Port allows communications with the switch to configure action upon source loss and recovery. Remote Port also allows user override switching and can place the unit in A/B Switch mode for manually switching. LED display indicates switch position and power presence at a glance. Front panel pushbutton switch changes the switch position when the unit is in the A/B Switch mode. Specifications: PORT CONNECTORS: (3) SC Duplex fiber optic connectors labeled A, B, and COMMON. FIBER OPTIC INTERFACE: Wavelength 1300nm, speed 100 MBPS, multimode fiber, full duplex transmission, Fiber Size 62.5/125 micron. FRONT PANEL CONTROL: (1) pushbutton to select network port. DISPLAY: (2) status red LEDs indicate switch position. REMOTE: (1) DB9 / female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation. POWER: UL approved 115VAC / 60Hz, wall mount power module supplies 12 VDC, 500mA to the unit. DIMENSIONS: Desktop: 7.5" W x 2.0" H x 7" D (19.1 X 5.1 X 17.8 cm) WEIGHT: Approx. 2.8 lbs (1.3 kg) Additional Info: http://www.electrostandards.com/ProductDetail/?productid=100 | |||||||||
QuickSwitch® 4186 Fiber Optic Network SC Duplex Multimode A/B/C Switch with Remote Port QuickSwitch® 4186 Fiber Optic Network SC Duplex Multimode A/B/C Switch with Remote Port has a multimode duplex fiber connector on the A, B, C and COMMON ports. The switch connects a workstation or device among three other devices or networks. Model 4186 QuickSwitch Fiber Optic Switch Features: QuickSwitch® 4186 has a multimode duplex fiber connector interface on the A, B, C, and COMMON ports. The switch connects a workstation or device between three other devices or networks. The internal circuitry insures isolation between the A, B, and C devices / networks. A great solution for fallback network and sharing applications. A front panel button changes the switch position eliminating the need to plug and unplug fiber patchcords thus minimizing connector wear. Switch position status is displayed on the front panel LED's. Specifications: CONNECTORS: (4) SC Duplex ports A, B, C, and COMMON. FIBER OPTIC INTERFACE: Wavelength 1300nm, speed 100 Mbps, multimode fiber, full duplex transmission, Fiber Size 62.5/125 micron. FRONT PANEL CONTROL: (1) Pushbutton to select port A, B, or C. DISPLAY: (3) Red LEDs display switch position and indicate power presence. SUPERVISORY REMOTE PORT: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation. POWER: UL Approved 115 VAC / 60 Hz, wall mount supplies 12 VDC, 500mA to the unit. DIMENSIONS: Desktop: 7.5"W x 2.0"H x 7" D. WEIGHT: Approx. 2.8 lbs. The standard unit also includes an RS-232 serial security enhanced Supervisory Remote Port. Upon proper authentication, a terminal or computer in terminal mode connected to this port can communicate with the unit, determine its status, change the switch position as desired, and/or lockout front panel switching capability. A modem can also be connected to this port for remote access to the switch. Access to the Supervisory Remote Port feature is password protected. An optional graphical user interface (GUI) software is also available for use with a computer running Windows operating system. This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=22 | |||||||||
QuickSwitch 4198 8-Way Fiber Optic Switch/Converter w/Remote Control Features - Access any one of eight separate fiber optic networks from one computer. - Simple pushbutton switching eliminates plugging and unplugging fiber optic patchcords, minimizing connector wear and increasing system reliability. - All eight network ports are 1300nm 100 Mbps ST duplex multimode fiber optic ports. - The COMMON port converts the selected fiber optic network port to the 100BaseTX interface. - Internal circuitry insures isolation between networks / devices. - Acts as a signal source, no optical signal loss. - Remotely control the unit from the RS232 serial Remote port. - LED display indicates switch position and fiber link presence at a glance. - Other fiber optic interface network ports are available. - A 4-Port model is available. Operation QuickSwitch 4198 allows the user to access any one of eight separate fiber optic network ports, 1-8 from a computer connected to the COMMON 100BaseTX port. The fiber optic / twisted pair media conversion is built in! Ports 1-8, are 1300nm 100 Mbps ST multimode fiber optic ports. SC duplex is available. Customized configurations are available. QuickSwitch can be controlled from front panel pushbuttons or remotely via an RS232 serial managment port. Front panel control is as simple as pushing the button of the desired network port. LED indicators display the switch position status, as well as the presence of the fiber optic link. QuickSwitch can be controlled from front panel pushbuttons or remotely via an RS232 serial management port. Front panel control is as simple as pushing the button of the desired network port. LED indicators display the switch position status, as well as the presence of the fiber optic link. QuickSwitch Remote operation enables the remote user to change the switch position, query the switch position status, and lockout front panel operation. Specifications: Connectors - Ports 1-8 are 100 Base FX fiber optic ST duplex ports. COMMON port is 100Base-T RJ45. Fiber Optic Interface - Wavelength 1300nm, speed 100Mbps, multimode fiber, full duplex transmission. Controls - (8) Pushbuttons to select network port. Display - (8) Status red LED's; (8) Link red LED's. Remote Port - RS232 serial port, RJ45 connector. Power - 115VAC / 60HZ wall mount supply. Dimensions - 11'W x 2.7"H x 8.5"D, wt. 3 lbs. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=8 | |||||||||
QuickSwitch® 4374 SC Duplex Fiber-to-T1 A/B Switch / Converter QuickSwitch® 4374 is an SC Duplex Fiber-to-T1 A/B Switch/Converter allows the user the capability of accessing two separate fiber optic SC Duplex ports from a T1 port. The switch may be controlled manually or remotely. To switch manually simply depress the front panel pushbutton and the switch will change to the new selected position as indicated by the front panel LED's. Remote switching of the unit is done through an RS232 (DB-9) serial port located on the rear of the unit. QuickSwitch® 4374 Fiber Optic Switch Features:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=123 | |||||||||
QuickSwitch® 5191 8-Way Fiber Optic Switch/Converter with Remote Control QuickSwitch® 5191 8-Way Fiber Optic Switch/Converter with remote control can access any one of eight separate fiber optic networks from one computer connected to the COMMON 100BaseTX port. The fiber optic / twisted pair media conversion is built in! Ports 1-8 are 1300nm, 100 Mbps SC multimode fiber optic ports. (ST duplex is available) The switch is fully compliant with the 802.3u 100 Base FX standard. QuickSwitch® 5191 can be controlled from front panel pushbuttons or remotely via an RS232 serial management port. Front panel control is as simple as pushing the button of the desired network port. LED indicators display the switch position status, as well as the presence of the fiber optic link. QuickSwitch® 5191 Remote operation enables the remote user to change the switch position, query the switch position status, and lockout front panel operation. QuickSwitch® 5191 Fiber Optic Network Switch / Converter Features:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=267 | |||||||||
The QuickSwitch® 6275 ST Duplex Fiber Optic 8-Position Switch with OFF-LINE Position and Remote Serial Control The QuickSwitch® 6275 ST Duplex 8-position Fiber Optic Switch with Remote Serial Control allows the user to switch one Common ST Duplex port to any one of eight ST Duplex ports, or to be switched to an Off-Line position isolating all ports from each other. The system affords local and remote access functionality. Remote access can be accomplished by RS-232 commands sent via the Remote Serial Port. Users can remotely monitor status and control switch functions. Features:
Specifications:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1768 | |||||||||
QuickSwitch® Fiber Optic Network Switches QuickSwitch® 6261 Gigabit 8-Strand Single Mode Fiber Optic (SMF-28) Mirror A/B Switch, 1310 nm LC with Ethernet Access Features:
Specifications:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1769 | |||||||||
The QuickSwitch® 6273 ST Duplex Fiber Optic A/B Switch with Remote Serial Control The QuickSwitch® 6273 ST Duplex Fiber Optic A/B Switch with Remote Serial Control allows one COMMON to access either of two separate fiber optic networks. The system affords local and remote access functionality. Remote access can be accomplished by RS232 commands sent via the Remote Serial Port. Users can remotely monitor status and control of switch functions. Features:
Specifications
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1773 | |||||||||
QuickSwitch® Fiber Optic Network Switch QuickSwitch® 6292 Fiber Optic Mirror A/B/C Switch, Single Mode LC Duplex, with 10/100 BASE-T LAN TELNET Access IP Addressable For Critical Network Alternate-Path Switching! The QuickSwitch® Model 6292 Fiber Optic Mirror A/B/C, LC Duplex Switch with 10/100 Base-T LAN Telnet Access allows the user the capability of sharing a Fiber Optic LC Duplex pair connected to the "COMMON" port among three other sets of LC Duplex pairs connected to the A, B, and C ports with local and remote access functionality. Remote access can be accomplished using an Ethernet 10/100-Base-T connection and Telnet commands. Features:
Specifications:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1779 | |||||||||
The QuickSwitch® Model 6293 Fiber Optic Mirror A/B/C switch with Single Mode LC Duplex and Remote Serial Access The QuickSwitch® Model 6293 Fiber Optic Mirror A/B/C switch with Single Mode LC Duplex and Remote Serial Access allows the user the capability of sharing a Fiber Optic LC Duplex pair connected to the COMMON port among three other sets of LC Duplex pairs connected to the A, B, and C ports with local and remote access functionality. This Remote access can be accomplished using an RJ45 connection and ASCII commands. Features: The switch ports are transparent to all data. All switched signals are passed via mirror relays that maintain their position and continuity even in the event of a power loss or failure. Supports single mode fiber (SMF-28), 9/125 micron fiber with a wavelength of 1310 nm. Control of the switch position from an RJ5 serial port or alternatively,the front panel push button. Remote ASCII command interface that allows user to control switch position and obtain switch status. Front panel push button may be "locked out" using the remote ASCII commands. MEMS mirror switch supports OC12 speeds of 622 Mbps. Requires customer supplied -48 VDC, 500 mA power input. Specifications: WAVELENGTH: 1310 nm. PORT CONNECTORS: (4) LC Duplex connectors labeled A, B, C, and COMMON. CONTROL: (1) Pushbutton allows selection of switch position. DISPLAY: (3) Red LED's display switch position and power status. SUPERVISORY REMOTE PORT: (1) RJ45 (F) connector accepts ASCII RS232 serial data. POWER: Connector on rear panel accepts customer supplied -48 VDC, 500 mA power input. A mating connector is included along with wiring instructions. DIMENSIONS: Standard rackmount, 19.0" W x 1.75" H x 8.0" D. WEIGHT: Approximately 4.5 lbs. This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1780 | |||||||||
The QuickSwitch® 6212 ST Duplex 10-position Fiber Optic Switch with Remote Ethernet Port and GUI The QuickSwitch® 6212 ST Duplex 10-position Fiber Optic Switch with Remote Ethernet Port allows the user to switch one Common ST Duplex port to any one of ten ST Duplex ports. The system affords local and remote access functionality. The Remote Ethernet Port allows for both Telnet and GUI remote control. User's can locally or remotely monitor status and control switch functions. Features: One ST duplex fiber optic port is able to access any one of ten ST duplex ports. All fiber optic signals passed through the switch are maintained in fiber optic light transmission media. MEMS-based mirror/prism switch technology supports Gigabit data rates. All ports are ST Duplex, Multimode, 62.5/125 Micron, 1300nm. Control of the switch position from a 10/100-Base-T LAN Ethernet environment or the front panel pushbuttons. Remote Telnet command interface or Graphical User Interface that allow the user to control switch position and obtain switch status. Front panel LED's display the current switch position and power status. Remote commands to lock front panel pushbutton control. The switch is latching and will maintain its position and continue to pass data in the event of a power failure. IP Addressable. Software Features: Access User Interface via standard web browser. Easy to use, simple point and click operation. Remotely access to control or monitor the QuickSwitch® 6212 10-Position Fiber Optic Switch System. Users can change the switch's IP address. LAN access gives users across the LAN or over the Internet access to control if user network is configured accordingly. Specifications: Fiber Size: 62.5/125 Micron, 1300nm PORT CONNECTORS: (11) Fiber Optic ST duplex connectors labeled 1 thru 10 and COMMON. REMOTE CONTROL: (1) RJ45(F) connector accepts 10/100 Base-T LAN Ethernet, Telnet and Graphical User Interface commands. CONTROLS: (10) Front panel pushbuttons allow selection of switch position. DISPLAY: (10) Red LED's indicate switch position and power presence. POWER: UL approved 120 VAC, 60Hz wall mount power module supplies 12 VDC, 500 mA to the unit. DIMENSIONS: Desktop Configuration: 16.49" W x 8" D x 3.5" H (2U rack height) WEIGHT: Approximately 6.0 lbs This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1787 | |||||||||
QuickSwitch® 6274 ST Simplex, Single Mode, Dual Wavelength, Fiber Optic A/B/C/D Switch with Remote Contact Control The QuickSwitch® 6274 ST Simplex, Single Mode, Dual Wavelength, Fiber Optic A/B/C/D Switch with Remote Contact Control allows the user the capability of connecting one COMMON port device to any one of four networks. The system affords local and remote access functionality. Remote access can be accomplished by Contact Closure on the Remote DB15 port. Features: - Switch allows access to up to four separate fiber optic networks. - The switch uses mirror technology and is transparent to data and speed. Supports gigabyte data rates. - A, B, C, D, and COM ports are ST Simplex. - Supports Single Mode, SMF-28, 8.2 micron fiber with wavelength of 1310 nm and 1550 nm. - Front panel pushbutton control or Remote Contact Control accwss through the DB15 Remote Port. - Remote Contact Control allows the user to change the unit's position and lockout the front panel pushbutton. - Front panel LED's display the current switch position and power status. - Maintains position and data transmission if power is lost. - Standard 2U high rackmount configuration. Specifications: Port Connectors: (5) ST Simplex Fiber Optic connectors on rear panel, A, B, C, D, and COMMON. Remote: (1) DB-15(F) Remote Connector accepts contact closure to control switch position. Front Panel Controls: (1) pushbutton allows switch selection A, B, C, D. Power: UL approved 110/120 VAC, 60 Hz wall mount power module supplies 12 VAC, 500mA to the unit. Wavelength: 1310 nm and 1550 nm Dimensions: 19" W x 3.5" H x 8" D Weight: Approximately 5.5 lbs Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1795 | |||||||||
The QuickSwitch® 6258 Six-Channel All Optic Online/Offline Switch, LC Duplex with 10 BASE-T LAN TELNET Access. The QuickSwitch® 6258 Fiber Optic Online/Offline 6-Channel Switch allows the user to CONNECT each input fiber optic cable to its respective output fiber optic cable or, alternatively, to DISCONNECT the input fiber optic cable from its respective output fiber optic cable. All channels are switched, individually. Switching may be accomplished locally by front panel control, or remotely using an Ethernet 10-Base-T connection and Telnet commands. The front panel LED's display switch position, status, and power. Features: Fiber Optic Switch employs mirror technology. Wavelength is 1300 nm. The switch ports are transparent to all data. Switch maintains position on power loss and continues to pass data. Control of the switch locally or via REMOTE input that accepts 10-Base-T LAN Ethernet connection. Remote Telnet control allows switch status monitoring and front panel lockout. All fiber ports are LC Duplex, multimode, 62.5/125 mm. Front panel LED's display switch position and power status. Keyslots allow for wall mount or desktop. Specifications: PORT CONNECTORS: (12) LC duplex fiber optic connectors labeled ON and OFF. (2 for each of the 6 channels). WAVELENGTH: 1300 nanometers REMOTE PORT: (1) RJ45 female connector accepts 10-Base-T LAN connection for remote control switching. POWER: UL Approved wall mount power module, 120 VAC, 60 Hz supplies 12 VDC, 500 mA. DISPLAY: (12) Red, front panel LEDs indicate switch position, status and power. CONTROLS: (6) Pushbutton controls allow local switching. DIMENSIONS: Rackmount Configuration, 16.75"W x 3.5"H x 8" D WEIGHT: Approx. 4.5 lbs Order Electro Standards Laboratories Custom Length Fiber Optic Cables! Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1822 | |||||||||
The QuickSwitch® 6259 16-Channel Fiber Optic ST Simplex A/B/Off-Line Switch The QuickSwitch® 6259 16-Channel Fiber Optic ST Simplex A/B/Off-Line Switch allows devices connected to COMMON port of each channel access to the A or B port on each channel. All channels are switched simultaneously. The QuickSwitch® 6259 Fiber Optic switch is enclosed in a standard 2U rackmount casing. This 16-channel switch may be controlled locally by manually operating the front panel pushbutton. The front panel LED display indicates all of the switch positions and unit power status. Features: All switch control is from the front-panel. No remote control! Front panel LED's for display of current position of all channels as well as the power status. All 16 channels switch simultaneously. MEMS-based mirror/prism switch technology supports Gigabit data rates. Bit-rate and data transparent. Optical data throughput scalability. All fiber ports are ST simplex, multimode, 62.5/125 micron and support a wavelength of 850 nm. When power is lost, unit goes off-line and does not pass data. When power is restored, unit will retain last position. Specifications: PORT CONNECTORS: (48) ST female connectors (A group of (3) labeled A, B, and COMMON for each of the 16 channels). WAVELENGTH: 850 nm FRONT PANEL CONTROLS: (1) Manual pushbutton allows local switching. DISPLAY: (2) Front panel LED's display switch position and power status. POWER: WIDE RANGE CE and UL listed table mount power module (Cat.No. 988147) 100VAC/240VAC, 50Hz/60Hz supplies 12VDC to the unit. Ideal for international applications. DIMENSIONS: 19" W x 3.5" H x 12" D (48.3 x 8.9 x 30.5cm) WEIGHT: 8.5 lbs (3.9 kg) Order Electro Standards Laboratories Custom Length ST Fiber Optic Cables! All Electro Standards Labs cables are performance tested and certified! Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1835 | |||||||||
QuickSwitch® 4193 8-Way Fiber Optic Switch / Converter QuickSwitch® 4193 8-Way Fiber Optic Switch / Converter allows the user to access any one of eight separate fiber optic devices or networks via ports 1/2/3/4/5/6/7/8, from a workstation or device connected to the COMMON 10/100 Base-TX port. All eight of the fiber optic ports are 1300nm, 100Mbps ST duplex multimode ports. The built in electronics will automatically convert the common port to 10/100 Base-T twisted pair media. SC Duplex is available. Custom configurations are available. QuickSwitch® 4193 can be controlled from front panel pushbuttons only. Front panel control is as simple as pushing the button on the desired network port. LED indicators display the switch position status, as well as the presence of the fiber optic link. QuickSwitch® 4193 Features: QuickSwitch® 4193 fiber optic network switch/converter allows access to any one of eight separate fiber optic networks from one computer. Simple pushbutton switching eliminates plugging and unplugging fiber optic patchcords, minimizing connector wear and increasing system reliability. All eight network ports are 1300nm 100 Mbps ST duplex multimode fiber optic ports. The COMMON port converts the selected fiber optic network port to the 100BaseTX interface. Internal circuitry insures isolation between networks / devices. Acts as a signal source, no optical signal loss. LED display indicates switch position and fiber link presence at a glance. Spare power supply available, P/N 522586. Other fiber optic interface network ports are available. A 4-port model is available. See Model 4189, Cat. No. 30318 QuickSwitch® Specifications: CONNECTORS: Ports 1 - 8 are 100 Base FX fiber optic ST duplex ports. COMMON port is 100 Base-T RJ45. FIBER OPTIC INTERFACE: Wavelength 1300 nm, speed 100 Mbps, multimode fiber, full duplex transmission. CONTROLS: (8) Pushbuttons to select network port. (No remote port). DISPLAY: (8) Status red LED's; (8) Link red LED's. POWER: UL approved 100-240VAC / 50/60HZ wall mount power module supplies power to the unit, P/N 522586. DIMENSIONS: 11" W x 2.7" h x 8.5" D (27.9 x 6.9 x 21.6 cm) WEIGHT: Approximately 5 lbs (2.3 kg) Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1839 | |||||||||
QuickSwitch® 4173 ST Duplex A/B 100 Base FX to Common 100 Base TX Switch/Converter The QuickSwitch® 4173 ST Duplex A/B 100 Base FX to Common 100 Base TX switch allows the user the capability of accessing two separate fiber optic 100 Base FX ports from a 100 Base TX port. The switch is fully compliant with the 802.3u 100 Base TX/FX standard. The A/B switch may be controlled manually via a front panel pushbutton or remotely from an RS-232 serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS-232 serial port located on the rear of the unit. OPERATION: 100 Base FX A/B Ports: Ports "A" and "B" are 1300nm, ST Duplex, Multimode, 100 Base FX fiber optic ports. The selected fiber optic port will convert and pass data to and from the 100 Base TX common port. 100 Base TX Common Port: The RJ45 Female Common Port is a 100Base TX Fast Ethernet port. The 100 Base TX "Common" port will convert and pass data to and from the selected 100 Base FX port "A" or "B". Switch Control: The switch position may be controlled manually via a front panel pushbutton located on the front of the unit, or remotely from a remote RS-232 serial port located on the rear of the unit. To switch manually simply press the front panel push button and the switch will change to the new selected position as indicated by the front panel LED's. Remote switching of the unit is done through an RS-232 (DB-9) serial port located on the rear of the QuickSwitch® 4173, which may be connected to any standard RS-232 port on a computer. The computer once connected to the remote port may use any common terminal emulation software (i.e. WINDOWS95 Hyperterminal software) to access the remote port on the QuickSwitch® 4173. FEATURES: Ruggedized-for-vibration version of the QuickSwitch® 4183. Built in fiber optic / copper medium conversion allows access to two separate fiber optic ST ports (ports A and B) from a Fast Ethernet RJ45 port. Front panel pushbutton changes the switch position eliminating the need to plug and unplug fiber optic patchcords. MIL type power connector. Mating cable supplied with unit. Switch position displayed on front panel LED's. DB9/Female RS232 REMOTE port for remote control applications. A & B port ST Duplex, 1300 nm, 100 Mbps multimode. COM port RJ45 100-Base-TX. Specifications: PORT CONNECTORS: (2) ST Duplex female connectors labeled A, and B. (1) RJ45 female connector labeled COMMON. WAVELENGTH: 1300 nm. FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching. DISPLAY: (2) Front panel LED's display switch position and power status. REMOTE: (1) DB9 female connector on rear panel accepts RS232 Serial Data for remote control operation. POWER: A six-foot power cable with MIL Bayonet locking circular connector is supplied with the unit. Customer must supply 5VDC (Range 4.9 to 5.3 VDC) to this cable. Current rating is 1.5 Amps. DIMENSIONS: Desktop 7.5" W x 2.0" H x 7.0" D. WEIGHT: 3.8 lbs This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1854 | |||||||||
The QuickSwitch® 4183 ST Duplex A/B 100 Base FX to Common 100 Base TX Switch/Converter The QuickSwitch® 4183 ST Duplex A/B 100 Base FX to Common 100 Base TX switch allows the user the capability of accessing two separate fiber optic 100 Base FX ports from a 100 Base TX port. The fiber optic switch is fully compliant with the 802.3u 100 Base TX/FX standard. The A/B switch may be controlled manually via a front panel pushbutton or remotely from an RS-232 serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS-232 serial port located on the rear of the unit. OPERATION: 100 Base FX A/B Ports: Ports "A" and "B" are 1300nm, ST Duplex, Multimode, 100 Base FX fiber optic ports. The selected fiber optic port will convert and pass data to and from the 100 Base TX common port. 100 Base TX Common Port: The Common Port is a 100Base TX Fast Ethernet port. The 100 Base TX "Common" port will convert and pass data to and from the selected 100 Base FX port "A" or "B". Switch Control: The switch position may be controlled manually via a front panel pushbutton located on the front of the unit, or remotely from a remote RS-232 serial port located on the rear of the unit. To switch manually simply press the front panel push button and the switch will change to the new selected position as indicated by the front panel LED's. Remote switching of the unit is done through an RS-232 (DB-9) serial port located on the rear of the QuickSwitch® 4183, which may be connected to any standard RS-232 port on a computer. The computer once connected to the remote port may use any common terminal emulation software (i.e. WINDOWS95 Hyperterminal software) to access the remote port on the QuickSwitch® 4183. Features: Built in fiber optic / copper medium conversion allows access to two separate fiber optic ST ports (ports A and B) from a Fast Ethernet RJ45 port. Front panel pushbutton changes the switch position eliminating the need to plug and unplug fiber optic patchcords. Switch position displayed on front panel LED's. DB9/Female RS232 REMOTE port for remote control applications. A & B port ST Duplex, 1300 nm, 100 Mbps multimode. COM port RJ45 100-Base-TX. For a Ruggedized-for-vibration version of the QuickSwitch® 4183, see QuickSwitch® 4173, Cat No 303173. Specifications: PORT CONNECTORS: (2) ST Duplex female connectors labeled A, and B. (1) RJ45 female connector labeled COMMON. WAVELENGTH: 1300 nm. Front Panel Controls: (1) Manual pushbutton allows local switching. DISPLAY: (2) Front panel LED's display switch position and power status. REMOTE: (1) DB9 female connector on rear panel accepts RS232 Serial Data for remote control operation. POWER: UL approved 120 VAC, 60 Hz wall mount power module supplies 12 VAC, 500 mA to the unit. DESKTOP: 7.5" W x 2.0" H x 7.0" D. WEIGHT: 3.8 lbs Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1850 | |||||||||
The QuickSwitch® 6190 Fiber Optic A/B Switch, ST Duplex, Dual Wavelength with Remote Serial Control and Optional GUI - All Optical Switching! The The QuickSwitch® 6190 ST Fiber Optic A/B Switch with Remote Serial Control and Optional Graphical User Interface allows the user the capability of accessing tow separate devices, ports A & B, via connection through a device connected to the Common port of the switch. The system affords local and remote access functionality. Remote access can be accomplished by RS-232 commands sent via the Remote Serial Port or by Graphical User Interface (if ordered with GUI Option No. 520306). Users can remotely monitor status and control switch functions. The QuickSwitch® 6190 employs Micro Electro Mechanical System (MEMS) based multimode switches. Features: - The switch uses mirror technology, is transparent to data, and supports gigabyte data rates. - The switch supports Multimode, 50/125 micron fiber with wavelengths of 850nm and 1300 nm. - Front panel pushbutton control or Remote RS232 Serial Command access through the DB9/Female port. - Graphical User Interface to control switch position, lock front panel use and query status (If ordered with GUI option). - Remote commands to switch position, lock front panel use and query status. - Front panel LED's display the current switch position and power status. - If power to the unit is lost, the switch will revert to the A position and continue to pass data. Software Features of Graphical User Interface Option, Cat No 520306: - Access User Interface via included software. - Easy to use simple point and click operation. - Remotely access to control or monitor the QuickSwitch® 6190 ST Duplex A/B Switch System. - Lockout front panel manual access. Specifications: Port Connectors: (3) ST Duplex female connectors labeled A, B, and Common. Wavelength: 850 nm and 1300 nm. Front Panel Controls: (1) Manual pushbutton allows local switching. Display: (2) Front panel LED's display switch position and power status. Remote: (1) DB9 female connector on rear panel accepts RS232 Serial Data for remote control operation. As an option, Graphical User Interface is available. Power: UL approved 110 / 120 VAC, 60 Hz wall mount power module supplies 12 VAC, 500mA to the unit. Dimensions: Desktop 8.0" W x 2.7" H x 7.25" D. Weight: 2.8 lbs Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1855 | |||||||||
QuickSwitch® 4195 Fiber Optic SC Duplex to RJ45 Auto Fallback A/B Switch / Converter The QuickSwitch® 4195 Fiber Optic Switch / Converter allows the user the capability of accessing two separate fiber optic 100 Base FX ports (ports A and B) from a 100 Base TX Fast Ethernet port (COMMON port). The fiber optic / twisted pair copper conversion is built-in! The unit is fully compliant with the 802.3u 100 Base TX/FX standard. Ports A and B are 1300nm, SC Duplex, Multimode, 100 Base FX fiber optic ports. The Common port is a 100 Base TX Fast Ethernet port. The selected fiber optic port will convert and pass data to and from the 100 Base TX Common port. The internal circuitry insures isolation between the A and B devices/networks. A great solution for conversion and fallback applications. When in A/B Switch Mode, a front panel button changes the switch position eliminating the need to plug and unplug fiber patchcords thus minimizing connector wear. Switch position status is displayed on the front panel LEDs. A/B SWITCH MODE When in A/B Switch Mode, the A or B LED will be illuminated and flashing, indicating the switch position. To switch manually, simply press the front panel pushbutton. To switch via Remote Control, send serial data switch commands to the RS232/DB9 Remote port located on the rear panel. AUTO FALLBACK MODE When in Auto Fallback Mode, the A or B LED will be illuminated steady, indicating the switch position. The unit automatically selects its switch position based on the presence or absence of SD on fiber optic port A. IF SD is present, the switch maintains its connection to the A port. IF SD is absent, the unit automatically switches to port B. When SD on port A has returned, the switch returns to the A position. Specifications: PORT CONNECTORS: (2) SC duplex female connectors labeled A, B, and (1) RJ45 female connector labeled Common. FIBER OPTIC INTERFACE: 1300nm, 100 Mbps, multimode, full duplex. FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching. DISPLAY: (2) Front panel LED's display switch position and power status. REMOTE CONTROL: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control Operation. POWER: UL approved 120VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit. DIMENSIONS: Rackmount, 19.0" W x 3.5" H x 8.0" D. WEIGHT: Approximately 3.5 lbs. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1875 | |||||||||
QuickSwitch® 6288 ST Fiber Optic Mirror A/B Switch with Remote The QuickSwitch® 6288 ST Fiber Optic Mirror A/B Switch with Remote Serial Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port of the switch. The system affords local and remote access functionality. The switch position may be controlled manually via a front panel pushbutton, or remotely from an RS232 serial port located on the rear of the unit. To switch manually, simply depress the front panel pushbutton and the switch will change to the new selected position as indicated by the front panel LED's. Remote switching of the unit is done through an RS232 (DB9) serial port located on the rear of the QuickSwitch® 6288 which may be connected to any standard RS232 port on a computer. The computer, once connected to the remote port, may use any common terminal emulation software. Features: - Control via front panel pushbutton or over Remote port on rear panel. - Remote port is RS232, DB9/female port. - LED's display switch position and power status. - If power is lost, switch will default to A position (prime) and continue to pass data. - A and B ports are independent, and cannot be connected to each other at any time. - All fiber optic ports A, B, and Common are duplex, multimode ST ports. Fiber Size: 62.5/125 micron. - MEMS-Based 1300 nm Mirror Switch supports Gigabyte data rate. - Transparent to data format and speed. - Custom length data cables available. Specifications: Port Connectors: (3) ST Duplex female connectors labeled A, B, and Common. Front Panel Control: (1) Manual pushbutton allows local switching. Display: Front panel LED's display switch position and power status. Remote: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation. Wavelength: 1300 nm. Power: UL approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit. Dimensions: 7.25" W x 2.7" H x 7.75" D. Weight: 3.5 lbs. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1960 | |||||||||
QuickSwitch® 6278 Dual Channel ESCON Duplex Enabled/Disabled Switch The QuickSwitch® 6278 Dual Channel ESCON Duplex Enabled/Disabled Switch allows the user the capability of enabling or disabling the connection between devices connected to the IN and OUT ports of each channel. The QuickSwitch® 6278 ESCON switch is enclosed in a standard 1U rackmount casing. The dimensions are 19"W x 1.75"H x 8"D and the unit weighs approximately 4.5 lbs. The switch may be controlled locally by manually operating the front panel pushbutton. The front panel LED display indicates the switch position and unit power status. Features: - The switch ports are transparent to all data. - Switch maintains position on power loss and continues to pass data. - Both channels switched simultaneously. - Front panel pushbutton control. - Front panel LED's for display of current position of all channels as well as the power status. - MEMS-Based mirror switch technology supports Gigabyte data rate. - All IN and OUT ports are ESCON, Multimode, 62.5/125 micron, and support a wavelength of 1300nm. - Custom length ESCON cables available. Specifications: Port Connectors: (4) ESCON Duplex female connectors labeled CH1 IN, CH1 OUT, CH2 IN, and CH2 OUT. Front Panel Control: (1) Manual pushbutton allows local switching. Display: (2) Front panel LED's display switch position and power status. Power: UL Approved wall mount power module, 120 VAC, 60 Hz supplies 12 VDC, 500 mA to the unit. Dimensions: Rackmount Configuration 19.0"W x 1.75"H x 8"D Weight: Approx. 4.5 lbs. Wide Range Power Option Available: (Cat No 517277) CE and UL listed wall mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1966 | |||||||||
Custom Fiber Optic Network Switches From Electro Standards Laboratories Your Custom Fiber Optic Network Cables have never been Easier to Build! Electro Standards Laboratories, Cranston, RI, has made Custom Fiber Optic Network Cables even easier to build with their Custom Fiber Optic Cable Design Worksheet. These highly reliable network cables are available in Simplex, Duplex, PVC or Plenum. Some of ESL's other custom cable assemblies include: VersaLink Plastic Optical Fiber (POF) Patch Cord, MTP®/MPO Fanout, Multi Ribbon MTP® Trunk Cable in various configurations and lengths. All of ESL's custom fiber optic cables are 100% tested and inspected with a fast turn around time. Simply click on ESL's Custom Fiber Optic Cable weblink at http://www.electrostandards.com/Products-Custom/Fiber-Optic-Cable/ to start designing quality terminated fiber cables that are Multimode, available in all lengths/configurations with connectors of all combinations (LC, SC, FC, ST, FDDI, ESCON, MTRJ and more). Electro Standards has the expertise to produce many types of copper and fiber optic custom cable assemblies. For further assistance with your custom order, contact ESL's Technical Sales Team at 401-943-1164, via email at eslab@ElectroStandards.com or via Web at www.ElectroStandards.com. Additional Info: http://www.electrostandards.com/Products-Custom/Fiber-Optic-Cable/ | |||||||||
QuickSwitch® 5522 Single Channel 3-State JSIS/SVCN/OFF-LINE ST Duplex Fiber Optic Switch Introduction The QuickSwitch® 5522 allows the user the capability of accessing two separate devices, ports JSIS and SVCN, via connection through a device connected to the ROOM port. Users can link this model to the Model 5521 JSIS/SVCN/Off-Line Display Indicator unit for a robust conference communications switching system. The dimensions of the unit are 1.75"H x 10"D x 19"W and the unit mounts in a standard 19" equipment rack. The unit weight is approximately 4.5 lbs. Features: - Single Channel, ST Duplex, MultiMode switch. - Mirror technology used to switch signal. Supports gigabyte data rate. - Fiber is 62.5/125 micron and supports a wavelength of 850nm. - Both the TX and RX ports are switched together. - Unit is manually switched via front panel keylock actuator. - Unit permits signal to pass uninterrupted (JSIS and SVCN positions) or isolates in/out fiber (OFFLINE position). - Status Out port for linking switch system unit to the Model 5521 JSIS/SVCN/OFFLINE Display Indicator unit. - Installs in a standard 19" wide equipment rack. - The front panel indicator LED's on the QuickSwitch® 5522 will display the position status of the unit. - The position of the QuickSwitch® 5522 will follow the keylock actuator position at all times when there is power to the switch. - In the event power is lost, the switch will revert to Off-Line status regardless of the keylock position. When power is restored, the unit will automatically read and match the switch position indicated by the keylock actuator. - The key can only be removed from the keylock actuator in the OFFLINE position. Specifications: Port Connectors: (3) ST duplex female connectors labeled SVCN, JSIS, and ROOM. Front Panel Controls: (1) Three-position keylock actuator allows local switching. Display: (3) Front panel LED's display switch position and power status. Status Out: (1) DB9 female connector. Contact closure signals indicate switch position. Can be displayed on companion Display Indicator Unit, Model 5521, Cat. No. 305521. Power: UL Approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500mA to the unit. Dimensions: 19" W x 1.75" H x 10.0" D. Weight: 4.5 lbs. OPTION: Wide Range Power Module (Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of the standard 115VAC or 120VAC power module. Ideal for international applications. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1991 | |||||||||
Model 7245-ESL Dual Channel RS530 Switch and Fiber Optic ST Duplex Secure/Non-Secure Switch w/Cutoff The Model 7245-ESL Dual Channel RS-530 and ST Duplex (1300nm wavelength) Fiber Optic Secure/Non-Secure Switch with Cutoff provides two channel switching in a low profile, 19-inch 1U rack unit. The unit's dimensions are 19" W x 1.75" H x 8" D. Channel One allows the user the capability of sharing a single DB25(F) interface device connected to the COMMON port among two other DB25(M) devices connected to the SECURE and NON-SECURE DB25 ports. Channel Two allows the user the capability of sharing a 10/100 Base-T device connected to the COMMON port among two ST Duplex (1300nm wavelength) Fiber Optic devices connected to the SECURE and NON-SECURE Fiber Optic ports. Both channels allow the user to set the switches to the CUTOFF position, which stops any and all data throughput for the switch. The switches may be controlled locally by manually operating the front panel pushbuttons or remotely from the DB9 Control port located on the rear of the unit using either contact closures or an RS232 command interface. The front panel LED's display switch position and power status. All ports (SECURE, NON-SECURE and COMMON) are transparent to all data. If power to the Model 7245-ESL is removed, both switches will automatically move to the CUTOFF position. When power is restored, each switch will move to the programmed default position. Features: - Both Channels offer SECURE / NON-SECURE / CUTOFF switch positions with remote control. - Channel One is RS530 compatible. All 25 pins are switched. - Channel Two is Fiber Optic ST Duplex, multimode. Wavelength 1300 nm, fiber size 62.5/125 micron, 100 Meg data rate. - Remote switching via DB9 Remote port on rear panel. - Local switching via two front panel pushbuttons. - Local switch change sends ASCII text over the RS232 interface to notify the user of the new switch position. - All ports are located on the rear panel. - Status LED's on the front panel indicate the switch position & power status. - Either channel can be set to CUTOFF position, which stops any and all data throughput for the switch. Specifications: Channel 1 Port Connectors: (3) DB25 (M/M/F) connectors labeled SECURE, NON-SECURE and COMMON, respectively. Channel 2 Port Connectors: (2) Fiber optic ST Duplex connectors labeled SECURE and NON-SECURE, (1) RJ45 (F) connector labeled COMMON. Front Panel Controls: (2) Manual pushbuttons allow local switch of channels 1 and 2. Remote Control: DB9 female connector on rear panel accepts contact closure or RS232 serial data. Local Display: (6) LEDs on front panel display switch position and power presence. Power: 115 VAC, 60 Hz wall mount supply. Dimensions: 1.75" H x 19.0" W x 8.0" D Weight: 4.5 lbs Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2003 | |||||||||
QuickSwitch 7188 4-Channel Fiber Optic A/B Switch, LC Duplex with Ethernet and RS232 Remote Control The QuickSwitch 7188 4-Channel Fiber Optic LC Duplex A/B Switch with Ethernet and RS232 Remote allows the user the capability of sharing a single port interface device connected to the Common port among two other devices connected to the A and B ports for each channel. Remote Control access can be accomplished via the RJ45(F) Remote port using an Ethernet 10/100Base-T connection and either Telnet commands or graphical user interface, or can be accomplished via the DB9(F) Remote port using RS-232 serial commands. Features: - All fiber optic ports are LC Duplex Connectors Multimode, 62.5/125 micron, support a wavelength of 1300nm, and support speeds of 100Mbps. - The switch ports are transparent to all data. - Independent front panel pushbutton control for each channel. - Front panel LED's display current position for each channel and power status. - The switch has (2) Remote Control ports. The primary Remote Control port is an RJ45 10/100 Base-T Ethernet Remote Port that accepts both Telnet commands and GUI interface. The secondary Remote Control port is a DB9(F) that accepts RS232 Serial ASCII commands. - When power is lost, unit isolates all communication ports and does not pass data. - When power is restored, the unit automatically switches to the last known position. - IP Addressable. Software Features: - Access User Interface via standard web browser. - Easy to use, simple point and click operation. For complete details and screen capture images, request operation manual. - Remotely access to control or monitor the QuickSwitch 7188 Switch System. - Users can change the switch's IP address. - LAN access gives users across the LAN or over the Internet access to control if user network is configured accordingly. Specifications: - Port Connectors: (12) Fiber Optic LC Duplex, multimode connectors labeled A, B, and Common. - Front Panel Controls: (4) Front panel pushbuttons allow selection of switch position. - Display: (8) Front panel LED's display switch position and power status. - Primary Remote Control: (1) RJ45 female connector on rear panel accepts 10/100 Base-T LAN access Ethernet that uses both Telnet commands and a GUI interface for remote control operation. - Secondary Remote Control: (1) DB9(F) connector on rear panel accepts ASCII RS232 Serial Data for remote control operation. - Fiber Size & Wavelength: Multimode, 62.5/125 micron, 1300 nm. - Power: Wide Range CE and UL listed table mount power module (Cat. No. 522586) 100VAC/240VAC, 50Hz/60Hz. Ideal for international applications. - Dimensions: Rackmount, 19.00" W x 10.0" D x 3.5" H - Weight: Approximately 7.5 lbs (3.4kg). Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2030 | |||||||||
QuickSwitch® 6296 Single Mode LC Duplex Fiber Optic Bypass Switch The QuickSwitch® Model 6296 Single Mode LC Duplex Fiber Optic Bypass Switch supports connections between four sets of devices or peripherals connected to ports A, B, C, and D, in two different switch positions: Normal and Bypass. Features: - This mirror switch ports are transparent to all data. - Local control via front-panel pushbutton. - Normal Position connects A to B, and connects C to D allowing equipment connected to the B and C ports to be brought into the network. - Bypass Position connects A directly to D, isolating equipment connected to ports B and C from the network. - Front panel LED's display switch position and power status. - When power is lost, unit reverts to the Bypass position. - When power is restored, the unit automatically switches to the Normal position. - All fiber optic ports are LC Duplex Angle Polished Connectors, Single mode, 9/125 micron, and support a wavelength range of 1310nm - 1610nm. - MEMS-based mirror/prism switch technology supports Gigabit data rates. Specifications: - Port Connectors: (4) LC Duplex, Angled Polished connectors labeled A, B, C, and D. - Front Panel Control: (1) Manual pushbutton allows local switching. - Display: (2) Front panel LED's display switch position and power status. - Power: UL Approved wall mount power module, 120 VAC, 60 Hz supplies 12 VDC, 500 mA to the unit. - Dimensions: Rackmount Configuration 19.0"W x 1.75" H x 8"D - Weight: Approx. 4.5 lbs. - Fiber Size: 9/125 micron, Single Mode. - Wavelength: 1310 nm - 1610 nm. Wide Range Power Option Available: (Cat No. 517277) CE and UL listed wall mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications. QuickSwitch® ® is a registered trademark of Electro Standards Laboratories. QuickSwitch® Fiber Optic Switches are available in many configurations: auto fallback, switch/converters, multimode & single mode, and secure off-line positions. Check out our complete line of QuickSwitch® fiber switches. For custom fiber optic network switches contact our friendly sales support staff at 401-943-1164; or email: eslab@electrostandards.com, or complete our On-Line Custom Fiber Optic Switch Form: http://www.electrostandards.com/Products-Custom/Fiber-Switch/ Electro Standards can supply all of your Fiber Optic Cable requirements. Please click here to reach our Fiber Optic Cable Categories Webpage: http://www.electrostandards.com/Products-By-Category/?catid=33&category=Cables%2C+Fiber+Optic+Network&filter= Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2031 | |||||||||
QuickSwitch 6276 ST Duplex A/B Switch with Custom Remote The QuickSwitch 6276 Single Channel ST Duplex A/B Switch with Custom Remote allows a device connected to the COM port access to the A or B port. The switch may be controlled locally by manually operating the front panel pushbutton or remotely via the DB9 custom REMOTE port located on the rear panel. The DB9 REMOTE port provides control by signal transition logic and allows the user to both control and monitor the switch position remotely. The front panel LED display indicates the switch position and unit power status. Features: - Access any one of two separate fiber optic networks from one computer. - Local control via front-panel pushbutton. - Front-panel LED's display switch position and power status. - Internal circuitry insures isolation between networks/devices. - Bit-rate and data transparent. - MEMS-based mirror/prism switch technology supports Gigabit data rates. - Optical data throughput scalability. - All fiber ports are ST duplex, multimode, 62.5/125 micron and support a wavelength of 850 nm. - Remote control port allows off-site monitoring and switch management. - Retains last switch position even in the event of power loss and continues to pass data. - Custom length rigorously tested and certified, ST cables available for your switch installation. Specifications: - Port Connectors: (3) ST duplex connectors, labeled A, B, Common. - Fiber Interface: ST, Multimode, 62.5/125 micron, wavelength 850 nm. - Front Panel Control: (1) Manual pushbutton allows local switching. - Display: (2) Front panel LED's display switch position, and power status. - Remote Control: (1) DB9 female connector on rear panel accepts contact closure transition signals for Remote Control operation. - Power: UL Approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit. - Dimensions: 19.0" W x 1.75" H x 8.0" D (48.3 x 4.4 x 20.3 cm) - Weight: Approximately 4.5 lbs. (2.04 kg) Wide Range Power Option Available: (Cat No 517277) CE and UL listed tabel mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international application. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2050 | |||||||||
QuickSwitch Model 6283 Single Channel LC Duplex A/B Switch with Telnet Remote - IP Addressable for Critical Network Alternate-Path Switching! The QuickSwitch 6283 Single Channel LC Duplex A/B Switch with Telnet Remote allows a device connected to the COM port access to the A or B port. The siwtch may be controlled locally by manually operating the front panel pushbutton or remotely from the RJ45 Remote Control port located on the rear of the unit. The RJ45 Remote port provides control through telnet commands and allows the user to both control and monitor the switch position remotely. Features: - IP addressable. - The switch ports are transparent to all data. - Switch maintains position on power loss and continues to pass data. - Front panel pushbutton control. - Control of the switch position from a 10/100Base-T LAN Ethernet environment. - Remote Conrol Telnet command interface that allows the user to control switch position, lockout front panel operations and obtain switch status. - Remote control of the switch through the telnet command interface is password protected. - Front panel LED's for display of current position and power status. - MEMS-based mirrors/prism switch technology supports Gigabit data rates. - All A, B, and COM ports are LC, Multimode, 62.5/125 micron, and support a wavelength of 1310nm. - Custom length rigorously tested and cerified LC fiber optic cables available for your switch installation. Specifications: Wavelength: 1310 nm Fiber Size: 62.5/125 micron Port Connectors: (3) LC Duplex connectors labeled A, B, and Common. Control: (1) Pushbutton allows selection of switch position. Display: (2) Red LED's display switch position and power status. Supervisory Remote Port: (1) RJ45 (F) connector accepts 10/100 BASE-T LAN Ethernet (TELNET command interface). Power: UL approved 120VAC, 60 Hz wall mount power module supplies 12VDC 500mA to the unit. Dimensions: Rackmount, 19.0" W x 1.75" H x 8.0" D (48.3 x 4.4 x 20.3 cm) Weight: Approximately 4.5 lbs (2.04 kg) Wide Range Power Option Available: (Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2052 | |||||||||
QuickSwitch 4291 Single Channel LC Duplex A/B/C/D/Offline Switch with Contact Closure Remote The QuickSwitch® 4291 Single Channel LC Duplex A/B/C/D/Offline Switch with Contact Closure Remote allows a device connected to the COM port access to the A, B, C, or D ports. The QuickSwitch® 4291 dimensions are 19"W x 1.75"H x 10"D. The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB15 REMOTE port located on the rear of the unit. The DB15 REMOTE port provides control through contact closure and allows the user to both control and monitor the switch position remotely. The DB15 REMOTE port also allows the user the capability of locking out the front panel pushbutton controls. The front panel LED display indicates the switch position and unit power status. Features: - Allows quick connection to any one of four devices from one COMMON device. - MEMS-based mirror/prism switch technology supports Gigabit data rates. - Service protocol transparent. - Bit-rate and data transparent. - All fiber ports are LC duplex, multimode 50/125 micron and support a wavelength of 1310 nm. - Local control via front-panel pushbuttons. - Remote control port allows off-site monitoring and switch management. - Front-panel pushbutton control can be locked out, remotely. - Front-panel LED's display switch position and power status. - When power is lost, unit will switch to OFFLINE position and stop passing data. - When power is restored, unit will remain in OFFLINE position unti commanded to change. - OFFLINE switch position stops any and all data throughput for the unit. - Custom length rigorously tested and certified, LC fiber optic cables available for your switch management. Specifications: FIBER: LC multimode, 50/125 micron, wavelength 1310 nm. PORT CONNECTORS: (5) LC duplex female connectors, labeled A, B, C, D, and COMMON. FRONT PANEL CONTROLS: (5) Manual pushbuttons allow local switching. DISPLAY: (5) Front-panel LED's display switch position, and power status. REMOTE CONTROL: (1) DB15 female connector on rear panel accepts contact closure switch commands for Remote Control operation. POWER: UL Approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit. DIMENSIONS: 19.0" W x 1.75" H x 10.0" D (48.3 x 4.4 x 25.4 cm) WEIGHT: Approximately 4.5 lbs. (2.0 Kg) WIDE RANGE POWER OPTION AVAILABLE: (Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2056 | |||||||||
QuickSwitch 6298 Single Channel LC Duplex A/B Switch with RS232 Serial Remote The QuickSwitch 6298 Single Channel LC Duplex A/B Switch with RS232 Serial Remote allows a device connected to the COM port access to the A or B port. The QuickSwitch 6298 dimensions are 8" W x 2" H x 7.25" D. The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9 Serial Remote Control port located on the rear of the unit. The DB9 Remote port provides control through RS232 serial commands and allows the user to both control and monitor the switch position remotely. The front panel LED display indicates the switch position and unit power status. FEATURES: - Access any one of two separate fiber optic networks from one computer. - MEMS-based mirror/prism switch technology supports Gigabit data rates. - Service protocol transparent. - Bit-rate and data transparent. - All fiber ports are LC duplex, multimode, 50/125 micron and support a wavelength of 850 nm. - Local control via front-panel pushbutton. - The remote port accepts RS232 Serial Data commands for switch position control and monitoring. - Front panel pushbutton control can be locked out, remotely. - Front panel LED's display switch position and power status. - If power is lost, switch will default to A position and continue to pass data. - When power is restored, unit will remain in the A position until switched by the user. - Custom length rigorously tested and certified LC fiber optic cables available for your switch installation. SPECIFICATIONS: - Fiber: 50/125 micron, wavelength 850 nm. - Port Connectors: (3) LC duplex female connectors labeled A, B, and COMMON. - Front Panel Control: (1) Manual pushbutton allows local switching. - Display: (2) Front panel LED's display switch position, power status. - Remote Control: (1) DB9 (F) connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation. - Power: UL Approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit. - Dimensions: 8.0" W x 2.0" H x 7.25" D. (20.3 x 5.1 x 18.4 cm) - Weight: Approximately 3.0 lbs (1.4 Kg). WIDE RANGE POWER OPTION AVAILABLE: (Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2057 | |||||||||
QuickSwitch® 6269 SC Duplex A/B Switch with Contact Closure Remote QuickSwitch® 6269 SC Duplex A/B Switch with Contact Closure Remote allows a device connected to the COM port access to the A or B port. The QuickSwitch® 6269 dimensions are 19"W x 1.75" H x 8"D. The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9 Remote Control port located on the rear of the unit. The DB9 Remote port provides contact closure control and also allows the user to monitor the switch position and unit power status. Features: - Access any one of two separate fiber optic networks from one computer. - Internal circuitry insures isolation between networks/devices. - MEMS-based mirror/prism switch technology supports Gigabit data rates. - Service protocol transparent. - Bit-rate and data transparent. - Optical data throughput scalability. - All fiber ports are SC duplex, multimode, 62.5/125 micron and support a wavelength of 850 nm. - Local control via front-panel pushbuttons. - Remote control port allows off-site monitoring and switch management. - Front panel pushbutton control can be locked out, remotely. - Ideal for fallback applications. - Front panel LED's switch position and power status. - Retains last switch position even in the event of power loss and continues to pass data. - When power is restored, unit switches to position based on contact closure command. - Custom length rigorously tested and certified SC fiber optic cables available for your installation. Specifications: Port Connectors: (3) SC duplex female connectors labeled A, B, and Common. Fiber: 62.5/125 micron, 850 nm. Front Panel Control: (1) Manual pushbutton allows local switching. Display: (2) Front panel LED's display switch position and power status. Remote Control: (1) DB9 female connector on rear panel accepts contact closure commands for Remote Control operation. Power: UL Approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit. Dimensions: 19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm) Weight: Approximately 4.5 lbs. (2.0 Kg) Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2065 | |||||||||
QuickSwitch® 6297 OM3 LC Duplex A/OFFLINE/B Switch with Serial Remote The QuickSwitch® 6297 Single Channel OM3 LC Duplex A/OFFLINE/B Switch with Serial Remote allows a device connected to the COM port access to the A or B port. The QuickSwitch® 6297 dimensions are 19"W x 1.75"H x 8"D. The switch may be controlled locally by manually operating the front panel pushbuttons or remotely from the DB9 Remote Control port located on the rear of the unit. The DB9 Remote port provides control through RS232 serial commands and allows the user to both control and monitor the switch position remotely. The front panel LED display indicates the switch position and unit power status. Features: - Access any one of two separate fiber optic networks from one computer. - Local control via front-panel pushbuttons. - Remote control port allows off-site monitoring and switch management. - The remote port accepts RS232 Serial Data commands for siwtch position control and monitoring. - Unit switches to OFFLINE position before switching to A or B. - Service protocol transparent. - Bit-rate and data transparent. - Front panel pushbutton control can be locked out, remotely. - Ideal for fallback applications. - Front-panel LED's display switch position and power status. - MEMS-based mirror/prism switch technology supports Gigabit data rates. - Optical data throughput scalability. - All fiber ports are OM3 LC duplex, 50/125 micron Laser Enhanced Multimode and support a wavelength of 850 nm. - When power is lost, unit will switch to the OFFLINE position. - Data will not pass through the unit during power loss. - When power is restored, unit will remain in the OFFLINE position until commanded to change. - Optical Multimode 3 (OM3) compliant for laser enhanced 10-Gigabit laser applications. Specifications: Port Connectors: (3) OM3 LC duplex female connectors labeled A, B, and COMMON. Fiber: 50/125 micron, 850 nm. Front Panel Control: (3) Manual pushbuttons allow local switching. Display: (3) Front panel LED's display switch position, power status. Remote Control: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation. Power: "Wide Range" CE and UL listed table mount power module (Cat. No. 517277) 100VAC/240VAC, 50Hz/60Hz supplies 12VDC to the unit. Ideal for international applications. Dimensions: 19.0" W x 1.75" H x 8.0" D. (20.3 x 4.4 x 20.3 cm). Weight: Approximately 4.5 lbs (2.0 Kg). Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2064 | |||||||||
QuickSwitch® 6259R RoHS Compliant 16-Channel ST Simplex, Fiber Optic A/B/OFFLINE Switch
The QuickSwitch® 6259R 16-Channel Fiber Optic ST Simplex A/B/Off-Line Switch allows devices connected to COMMON port of each channel access to the A or B port on each channel. All channels are switched simultaneously. The QuickSwitch® 6259R Fiber Optic switch is enclosed in a standard 2U rackmount casing. This 16-channel switch may be controlled locally by manually operating the front panel pushbutton. The front panel LED display indicates all of the switch positions and unit power status. Features:
Specifications:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2131 | |||||||||
QuickSwitch® 6284 Fiber Optic ESCON A/B Mirror Switch with Remote Control Electro Standards Laboratories' QuickSwitch® 6284 enables a device connected to the COMMON port to access either two separate Fiber Optic networks via duplex ports. This cutting-edge switch utilizes MEMS-based (Micro Electro Mechanical System) multimode switches. The switch position of the QuickSwitch® 6284 can be controlled manually via a front panel pushbutton or remotely using the RS-232 serial port located on the rear of the unit. Once connected to the remote port, the computer can use any common terminal emulation software to manipulate the controls and monitor the switch position. QuickSwitch® Fiber Optic Network Switch Features: Access either of two ESCON Fiber Optic networks from one computerconnected to an ESCON COMMON port. MEMS-based (Micro Electro Mechanical System) 1300nm multimode mirror switch, 62.5/125 micron. Manual control by front-panel pushbutton. Remote control through RS-232 (DB9) serial port. Switch position displayed on front panel LED or on computer terminal via remote port. Insertion losses are less than 1.0 dB The switched Fiber Optic ESCON ports are transparent to all data. The M6284 A/B switch retains its current position in the event of a power failure. QuickSwitch® 6284 Specifications: CONNECTORS: Ports A, B and COMMON are Fiber Optic ESCON duplex ports. FIBER OPTIC PORT INTERFACE: Ports A, B and COMMON are fiber optic ESCON duplex ports that accept standard fiber optic ESCON duplex connectors. REMOTE PORT INTERFACE: RS-232 (DB9) serial port, 9600 Bps, located on rear of unit, may be connected to any standard RS-232 port or computer. CONTROLS: Manual pushbutton or via remote DB9 RS-232 serial port. DISPLAY: Front panel LED or computer terminal via remote port. POWER: 115 VAC / 60 Hz, wall mount supply DIMENSIONS: 3" H x 8" D x 8" W WEIGHT: 2.8 lbs. ESCON: (Enterprise Systems Connection) is an optical serial interface between IBM mainframe computers and periperal devices such as storage and tape drives. ESCON is capable of half-duplex communication at a rate of 16 MB/second over distances of up to 43 kilometers. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=121 | |||||||||
QuickSwitch® 6270 Fiber Optic SC Duplex A/B Mirror Switch with Remote Serial Control QuickSwitch® 6270 AB Fiber Optic Network Switch enables a device connected to the COMMON port to access either of two separate Fiber Optic networks via SC duplex ports. Model 6270 utilizes MEMS-based (Micro Electro Mechanical System) multimode switches. The switch position of the Model 6270 can be controlled manually via a front panel pushbutton or remotely using the rear-panel RS-232 serial port. Once connected to the remote port, the computer can use any common terminal emulation software to manipulate the controls and monitor the switch position. Model 6270 QuickSwitch Fiber Optic Switch Features: Access either of two SC Duplex Fiber Optic networks from one computer connected to an SC Duplex COMMON port. MEMS-based (Micro Electro Mechanical System) multimode mirror switch, 850nm. Manual control by the front panel pushbutton. Remote control via RS-232 (DB9) serial port. Switch position displayed on front panel LED or on computer terminal via remote port. Insertion losses are less than 1.0 dB. The switched Fiber Optic SC Duplex ports are transparent to data and speed. In the event of a power failure, The M6270 A/B fiber optic network switch will remain in its current position and continue to allow the unit to pass data. QuickSwitch® Specifications: CONNECTORS: Ports A, B and COMMON are Fiber Optic SC duplex ports. WAVELENGTH: 850 nm. FIBER OPTIC PORT INTERFACE: Ports A, B and COMMON are fiber optic SC duplex multimode 62.5 micron ports that accept standard fiber SC duplex connectors. REMOTE PORT INTERFACE: RS-232 (DB9) serial port, 9600 bps, located on rear of unit, may be connected to any standards RS-232 port of a computer. CONTROLS: Manual pushbutton or via remote DB9 RS-232 serial port. DISPLAY: Front panel LED or computer terminal via remote port. POWER: UL approved, 120VAC / 60Hz wall mount supply, included with the unit. DIMENSIONS: 1.75" H X 8" D X 19" W WEIGHT: 4.5 lbs Additional Info: http://www.electrostandards.com/ProductDetail/?productid=117 | |||||||||
QuickSwitch® 6302 Dual Channel LC Duplex A/B Switch with Telnet and GUI IP Addressable for Critical Network Alternate-Path Switching!An Essential Tool for Centrally Operated Network Management Systems. The QuickSwitch® Model 6302 Dual Channel LC Duplex A/B Switch with Telnet and GUI allows a device connected to the COM port access to the A or B port for each channel. Both channels are switched simultaneously. The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the RJ45 Remote Control port located on the rear of the unit. Remote Control access can be accomplished using an Ethernet 10/100 Base-T connection and either Telnet commands or graphical user interface. The QuickSwitch® 6302 dimensions are 19"W x 1.75"H x 8"D. Features:
Specifications:
Wide Range Power Option Available: (Cat No 517277) CE and UL listed table mount power module, 100 VAC/240 VAC, 50Hz/60Hz in place of standard 115 VAC or 120 VAC power module. Ideal for international applications. Software Features:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2140 | |||||||||
QuickSwitch® Fiber Optic Network Switch, OM3 LC DuplexQuickSwitch® 6397 OM3 LC Duplex A/OFFLINE/B Switch with Serial Remote
The QuickSwitch® Model 6397 Six-Channel OM3 LC Duplex A/OFFLINE/B Switch allows 6 devices connected to six "COM" ports to access their respective A or B ports or to be switched to OFFLINE for complete isolation.The switch may be controlled locally by manually operating the front panel pushbuttons or remotely from the DB9 Remote Control port located on the rear of the unit. The DB9 Remote port provides control through RS232 serial commands and allows the user to both control and monitor the switch position. Features:
Specifications: PORT CONNECTORS: (6) Sets of OM3 LC duplex connectors for the A, B, and COMMON ports for a total of (18) OM3 LC Duplex connectors. FIBER: OM3, 50/125 micron, 850 nm. FRONT PANEL CONTROL: (3) Manual pushbuttons allow local switching. DISPLAY: (3) Front panel LED's display switch position, power status. REMOTE CONTROL: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation. POWER: "WIDE RANGE" CE and UL listed table mount power module (Cat.No. 517277) 100VAC/240VAC, 50Hz/60Hz supplies 12VDC to the unit.Ideal for international applications. DIMENSIONS: 19.0"W x 3.5" H x 12.0" D.(48.3 x 8.9 x 30.5 cm) WEIGHT: Approximately 7.5 lbs (3.4 Kg) Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2146 | |||||||||
QuickSwitch® 7263 Fiber Optic ST Duplex A/B/Cut-Off Switch/Converter with Remote Control
The QuickSwitch® 7263 ST Duplex A/B/Cut-Off Switch/Converter allows the user the capability of accessing two separate fiber optic 100Base-FX ports from a 100Base-TX port. The Model 7263 also has a Cut-Off or "no-connect" position in which state there is no connection between any of the ports. Ports A, B, and COMMON are isolated from each other. The switch is fully compliant with the 802.3u 100Base-TX/FX standard supporting 100 megabit data rates. The Model 7263 installs in a standard 19" equipment rack, and is 1U in rack height (1.75"). The switch may be controlled manually via a front-panel pushbutton or remotely from a remote control port that supports both RS232 serial control, and contact control. Switch position status may be attained via the front panel LED Display or the remote RS232 serial port located on the rear of the unit. FEATURES:
SPECIFICATIONS: Port Connectors: (2) Fiber optic ST Duplex female connectors labeled A and B. (1) RJ45 female connector labeled COMMON. Fiber Optic Wavelength: 1300 nm. Front Panel Control: (1) Manual pushbutton allows local switching. Display: (3) Front panel LED's display switch position and power status. Remote: (1) DB9 female connector on rear panel accepts Contact Closure or RS232 Serial Data for Remote Control operation. Power: UL Approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit. Dimensions: 19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm) Weight: Approximately 3.5 lbs. (1.6 Kg) | |||||||||
QuickSwitch® 6254 Quad Channel LC Duplex A/B Switch with Telnet and GUI
Each channel of the QuickSwitch® 6254 Quad Channel LC Duplex A/B Switch allows a device connected to the COM port access to the A or B port. The switch may be controlled locally by manually operating the front-panel pushbutton or remotely from the RJ45 Remote Control port located on the rear of the unit. The RJ45 Remote port provides control through Telnet commands and allows the user to both control and monitor the switch position remotely. The graphical user interface is also accessible through the RJ45 Remote port. The front panel LED display indicates the switch position for each channel. FEATURES:
SPECIFICATIONS: Port Connectors: (3) LC duplex female connectors labeled A, B, and COMMON for each of four channels. Front Panel Control: (4) Manual pushbuttons allow local switching. Display: (8) Front panel LED's display switch position and power status. Remote: (1) RJ45 female connector on rear panel accepts 10/100 Base-T LAN access Ethernet for Remote Control operation. Power: Wide Range CE and UL listed table mount power module (Cat.No. 517277R) 100VAC/240VAC, 50Hz/60Hz supplies 12VDC to the unit. Ideal for international applications. RoHS Compliant. Dimensions: 19.0" W x 3.5" H x 10.0" D. (48.3 x 8.9 x 25.4 cm) Weight: Approximately 7.5 lbs. (3.4 Kg) Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2135 | |||||||||
QuickSwitch® 6299 Single Channel All Fiber Optic LC Duplex A/B Switch The QuickSwitch® 6299 Single Channel All Fiber Optic LC Duplex A/B Switch allows a device connected to the COM port access to the A or B port. The QuickSwitch® 6299 dimensions are 19"W x 1.75"H X 8"D. The switch may be controlled locally by manually operating the front-panel pushbutton. The front-panel LED display indicates the switch position and unit power status. FEATURES:
SPECIFICATIONS: Port Connectors: (3) LC duplex female connectors labeled A, B, and COMMON. Fiber: 50/125 micron, 850 nm. Front Panel Control: (1) Manual pushbutton allows local switching (No remote control). Display: (2) Front panel LED's display switch position and power status. Power: UL Approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit. Dimensions: 19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm) Weight: Approximately 4.5 lbs. (2.0 Kg) Wide Range Power Option Available: (Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2134 | |||||||||
QuickSwitch® Model 6197 Single Channel All Fiber Optic LC Duplex A/B/C/D Switch, with RS232 Remote The QuickSwitch® 6197 Single Channel LC Duplex A/B/C/D Switch with RS232 Remote allows the user the capability of sharing a single port interface device connected to the COM port among four other devices connected to the A, B, C, and D ports with remote access functionality. The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9 Remote Control port located on the rear of the unit. The Remote port provides control through RS232 serial commands and allows the user to both control and monitor the switch position. The front panel LED display indicates the switch position and unit power status. FEATURES:
SPECIFICATIONS:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2197 | |||||||||
QuickSwitch 6277 Single Channel SC Duplex Online/Offline Switch
The QuickSwitch 6277 is a Single Channel SC Duplex Online/Offline Switch allows the user the capability of connecting or disconnecting two separate devices connected to ports IN and OUT. All switch position control is via the front panel pushbutton. FEATURES:
QuickSwitch® Specifications: PORT CONNECTORS: (2) SC duplex female connectors, labeled IN and OUT. FIBER: 62.5/125 micron, 850 nm. FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching. DISPLAY: (2) Front-panel LED's display switch position, and power status. NO REMOTE CONTROL. POWER: UL Approved 120/240 VAC, 50Hz/60 Hz wall mount power module supplies 12VDC, 500 mA to the unit. DIMENSIONS: 19.0" W X 1.75" H X 8.0" D. WEIGHT: Approximately 4.5 lbs. (2.0 Kg) Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2228 | |||||||||
QuickSwitch 6262 Single Channel All Fiber Optic LC Duplex 8-to-1 Switch, with RS232 Remote The QuickSwitch 6262 Single Channel LC Duplex 8-to-1 Switch with RS232 Remote allows the user the capability of sharing a single port interface device connected to the COMMON port among eight other devices connected to the A, B, C, D, E, F, G, and H ports, with remote access functionality. Remote Control access can be accomplished using ASCII RS-232 commands. The QuickSwitch 6262 dimensions are 19"W x 1.75"H x 10"D. FEATURES:
SPECIFICATIONS:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2257 | |||||||||
QuickSwitch® 4292 Single Channel LC Duplex A/B/C/D/Off-Line Switch, with RS232 Remote Specifications:
The QuickSwitch® 4292 Single Channel LC Duplex A/B/C/D/Off-Line Switch with RS232 Remote allows the user the capability of sharing a single port interface device connected to the COMMON port among four other devices connected to the A, B, C, and D ports, or to isolate all ports in the OFFLINE position. Remote access can be accomplished using a DB9 RS232 connection and ASCII serial commands. The QuickSwitch® 4292 is enclosed in a 1U, full rack size, black anodized chassis designed to provide EMI/RFI shielding and fit in a standard 19" rack. Features:
Wide Range Power Option Available: (Cat No 517277)CE, RoHS, and UL listed table mount power module, 100 VAC/240 VAC, 50Hz/60Hz in place of standard power module. Has IEC 60320 C14 inlet. Ideal for international applications. QuickSwitch® ® is a registered trademark of Electro Standards Laboratories. QuickSwitch® Fiber Optic Switches are available in many configurations: auto fallback, switch/converters, multimode & single mode, and secure off-line positions. Check out our complete line of QuickSwitch® fiber optic switches. For custom fiber optic network switches contact our friendly sales support staff at 401-943-1164; or email: eslab@electrostandards.com, or complete our On-Line Custom Fiber Optic Switch Form: http://www.electrostandards.com/Products-Custom/Fiber-Switch/ Electro Standards can supply all of your Fiber Optic Cable requirements. Please click here to reach our Fiber Optic Cable Categories Webpage:http://www.electrostandards.com/Products-By-Category/?catid=33&category=Cables%2C+Fiber+Optic+Network&filter= All data switch boxes, data communication products, and data acquisition products are subject to a one year warranty against manufacturing defects. The limit of ESL liability is limited to the cost of the ESL product provided. *Prices online are subject to change and verification.All ESL products are available for export. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2272 | |||||||||
QuickSwitch® 6267 Dual Channel LC Duplex A/B SwitchTwo channels of "all fiber optic switching" supports Gigabit data rates! SPECIFICATIONS:
The QuickSwitch® Model 6267 Dual Channel LC Duplex A/B Switch allows the user the capability of sharing a single port interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports, for each channel. The QuickSwitch® Model 6267 is enclosed in a 1U, full rack size, black anodized chassis designed to fit in a standard 19" rack. FEATURES:
Option: Wide Range Power Supply: (Cat No. 517277) CE, RoHS, and UL listed table mount power module, 100VAC/240VAC, 50/60Hz for use in place of the standard power module that is included in the unit. Has IEC 60320 C14 inlet. Ideal for international applications. QuickSwitch® ® is a registered trademark of Electro Standards Laboratories. QuickSwitch® Fiber Optic Switches are available in many configurations: auto fallback, switch/converters, multimode & single mode, and secure off-line positions. Check out our complete line of QuickSwitch® fiber optic switches. For custom fiber optic network switches contact our friendly sales support staff at 401-943-1164; or email: eslab@electrostandards.com, or complete our On-Line Custom Fiber Optic Switch Form:http://www.electrostandards.com/Products-Custom/Fiber-Switch/ Electro Standards can supply all of your Fiber Optic Cable requirements. Please click here to reach our Fiber Optic Cable Categories Webpage: http://www.electrostandards.com/Products-By-Category/?catid=33&category=Cables%2C+Fiber+Optic+Network&filter= All data switch boxes, data communication products, and data acquisition products are subject to a one year warranty against manufacturing defects. The limit of ESL liability is limited to the cost of the ESL product provided. All ESL products are available for export. Electro Standards welcomes International inquiries: commutateurs ą fibres optiques, interruptores de fibra óptica, switch in fibra ottica, switches de fibra óptica, fiberoptiska switcher. *Prices online are subject to change and verification. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2314 | |||||||||
QuickSwitch 6331 Dual Channel LC Duplex Online/Offline Switch The QuickSwitch® Model 6331 Dual Channel LC Duplex Online/Offline Switch allows the user the capability of connecting or disconnecting two separate devices, ports "IN" and "OUT", via an Online or Offline connection for each channel. The QuickSwitch® Model 6331 fits in a standard 19" rack, taking 1U of rack space. The switch may be controlled manually via the front panel only. Switch position state may be attained via the front panel LED's. Features:
Specifications:
Option: Wide Range Power Supply: (Cat No. 517277) CE, RoHS and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of the standard power module. Has IEC 60320 C14 inlet. Ideal for international applications. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2277 | |||||||||
QuickSwitch® Model 6330 Single Channel LC Duplex Online/Offline Switch The QuickSwitch® Model 6330 Single Channel LC Duplex Online/Offline Switch allows the user the capability of connecting or disconnecting two separate devices, ports "IN" and "OUT", via an Online or Offline connection. The QuickSwitch® Model 6330 fits in a standard 19" rack, taking 1U of rack space. The switch may be controlled manually via the front panel only. Switch position state may be attained via the front panel LED's. Features:
Specifications:
Option: Wide Range Power Supply: (Cat No. 517277) CE, RoHS and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of the standard power module. Has IEC 60320 C14 inlet. Ideal for international applications. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2276 | |||||||||
QuickSwitch 6266 6-Channel, All Optic, A/B Switch, LC Duplex with 10/100 BASE-T LAN TELNET Access, IP Addressable QuickSwitch® 6266 Six-Channel Fiber Optic LC Duplex AB Switch with Telnet allows the user the capability of sharing a single port Fiber Optic LC Duplex interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with local and remote access functionality for all 6 channels. All channels are switched simultaneously. Remote Access can be accomplished using an Ethernet 10/100 Base-T connection and Telnet commands. The QuickSwitch® 6266 is enclosed in a 2U, full rack size, all metal black chassis designed to fit in a standard 19" rack. Model 6264 QuickSwitch Fiber Optic Network Switch Features:
QuickSwitch® Specifications:
Option:Wide Range Power Supply: (Cat No. 517277) CE, RoHS, and UL listed wall mount power module, 100VAC/240VAC, 50/60Hz for use in place of the standard power module that is included with the unit. Has IEC 60320 C14 inlet. Ideal for international applications. Electro Standards can supply all of your Fiber Optic Cable requirements. Please click here to reach our Fiber Optic Cable Categories Webpage: http://www.electrostandards.com/Products-By-Category/?catid=33&category=Cables%2C+Fiber+Optic+Network&filter= Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2442 |