Network Switches from Electro Standards Laboratories

Products / Services:

	Click on a category to see this company's sample pictures for the chosen category.
	Cable Mil-Spec Cable Assemblies Data Electronic Fiber Optic Cable Connectors Clamps Flat Pneumatic Converters: Media Ethernet Fiber Optic Interface RS232 to RS485 Data Acquisition Systems Fiber Optic Connectors Indicators Load Cell Strain Gage Network Testers Repeaters Network Signal Conditioners Switches: Ethernet Copper Fiber KVM Network USB Testing Equipment Network

Electro Standards Laboratories

Cranston, RI

E-mail Company

Visit Website

Phone: 401-943-1164

Fax: 401-946-5790

* Click on an image to enlarge it in a new window *

Model 8076 Two-Channel RJ45/110-Block, Cat5e 100 Base-T Network Access Keylock Switch

The Model 8076 Network Access Keylock Switch accepts two 8-conductor Cat 5e cables INPUT via two RJ45 / 110-Block punchdown connectors, and allows the user to switch-through or break-from two OUTPUT RJ45 exit ports. The user can remove the top cover of the switch and punch down the connections inside the unit.

Features:
- Compact Size: 2" x 5" X 7"
- Supports (2) RJ45 100 Base-T Cat 5 drops
- "Normal" and "Break" positions via key access switch labeled "ON" and "OFF".
- Key shaped cutouts on bottom cover to facilitate wallmounting.
- 1/2 inch diameter conduit access for input cables.
- Internal to box, 110 punchdown of incoming lines.
- 100 Base-T, RJ45 female exit ports, external panel access.
- Cat 5e 100 Base-T Compliant

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1811

Model 9457 2-Channel, RJ45 A/B/C Cat 5e and 1-Channel, RJ45 A/B Cat 5e Switch, Manual Control, Rackmount

The Model 9457 is a unique device comprised of a 2-Channel RJ45 A/B/C, Cat5e Switch and a 1-Channel RJ45 A/B Cat5e Switch, all packaged in a slim 1U (1.75") high, 19-inch wide rackmount unit. The switches are manually controlled via two front panel rotary knobs. The two A/B/C switches are operated simultaneously by knob 1, and the single A/B switch is operated by knob 2.

Features:
- Manually switch 2 channels of A/B/C ports simultaneously via one knob, and 1-Channel of A/B ports on another knob, with both located on the front panel.
- No power required.
- Rated for 10/100/1000 networks (Up to Cat5e)
- Each channel switches all (8) leads.
- All (11) RJ45 female ports located on the rear panel: (3) A ports, (3) B ports, (2) C ports and (3) Common ports.
- All aluminum case provides EMI/RFI shielding.
- Dimensions: 19" W x 1.75" (1U) H x 8" D
- Weight is approximately 3 lbs.
- Tested for Cat5e compliance.
- Custom length RJ45 Cat5e cables are available in a wide variety of colors.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1865

Model 7211-RU Remote Unit, Rackmount

The Model 7211-RU Remote Unit, is designed to control the PathWay Model 7211 Dual Channel DB9 A/B Switch by providing the required contact closure control signals.

Features:
- Two toggle switches control the two DB9 interface A/B switch channels of the Model 7211.
- LED indicators display the current position of each switch channel.
- A transition from contact CLOSE (down) to OPEN (up) of the toggle switch will cause the channel to switch to "A". A transition from contact OPEN (up) to CLOSE (down) of the toggle switch will cause the channel to switch to "B".
- Upon power up, the unit looks for transitions.
- A single DB9 female Remote port accepts a straight through DB9 cable.
- Dimensions: 1.75" H x 8" D x 19" W.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1864

Model 7288SS DB25 4-Port Code Operated Switch, Desktop Case
- Utilizes Solid State Switches

The Model 7288SS DB25 4-Port Code Operated Switch allows the user the capability of accessing four separate devices, ports 1, 2, 3, and 4, via connection through a device connected to the Common port of the switch. There are no local controls for switch operation.

The switch position and lockout status can be changed through the data stream on the common port. Switch position states and lockout status may be attained via the front panel LED display.

Features:
- Pins 1-8 and 20 of the DB25 interfaces are switched.
- All DB-25 ports function as DCE ports.
- Remote commands switch the unit and change lock state.
- Front panel LEDs display the position and lock status.
- The unit utilizes solid state switches, maintains last set position on power loss and returns to this position upon restoration of power.
- Unit preset for customer specifications; no jumpers or dipswitches to set.
- There are no local, front panel, switch controls.
- Custom length DB25 cables available.

OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed wall mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Specifications:
Port Connectors: (5) DB25 (F) connectors labeled 1, 2, 3, 4, and Common.
Front Panel Control: None
Display: (4) Red Front panel LED's display switch position and power status. (1) Green front panel LED displays the unit's lockout status. (1) Yellow LED displays OFFLINE status.
Remote Control: Remote Control operation is accomplished via coded commands in the data stream of the Common port.
Power: UL approved 120VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: Desktop, 8.0"W x 7.25" D x 2.0" H.
Weight: Approximately 2.8 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1866

Model 8081 RJ45 A/B/C Switch, Manual Control, Cat 5 Compliant

Model 8081 RJ45 A/B/C Switch enables access to three 10/100 Base-T Cat5 networks from one Common RJ45 device. The Model 8081 Category 5 A/B/C Switch allows the user to reroute data between the three networks with a simple flip of a switch. The unit supports all 8 pins of the RJ45 Cat5 interface. No need to plug and unplug cables thereby eliminating connector wear.

Features:
- Allows access to three networks from one computer or workstation.
- Certified for Category 5 Compliance
- High quality sealed switch with self wiping contacts.
- Eliminates the need to plug and unplug cables.
- No external power required.
- Transparent to data format.
- Manual control via knob located on front panel.
- Rated for 10/100 Base-T networks (Up to Cat 5).
- (4) RJ45 Connections, ports A, B, C, and Common, located on rear panel.
- Aluminum case provides EMI/RFI shielding.
- Chassis size 5.25" Wide x 2.6" High x 7.25" Deep.
- Switching mechanism is sealed precious metal contact switch.
- Standard & custom category 5 cables available in multiple colors and any length! Call Electro Standards, 401-943-1164.

Specifications:
Connectors: (4) RJ45 female, category 5 ports on rear panel
Controls: (1) Rotary Switch on front panel selects A, B, C.
Pins Switched: All 8 Pins Switched.
Power: No power required.
Enclosure: Shielded Aluminum Enclosure.
Dimensions: 5.3"W x 7.3"D x 2.6"H (including feet)
Weight: 1 lb

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1954

Model 4441 4-Channel DB9 RS232 Serial Data Port Sharer, with Data Activity Enabled Port Contention

- Automatic Channel Sequencing allows 4 data channels to access one port!

The PathWay Model 4441 is a four channel, port sharing device. It allows a single destination port, the Common port, to automatically connect through to any of four source channels, A, B, C, or D, based on data activity. Each of these respective four DB9 RS232 serial interface source channels contend for connection. Channels A, B, C, and D are sequentially scanned or monitored for data activity.

Once data is detected on a single channel, the remaining three channels are locked out until the data traffic stops and is absent for a preset timout period. At that point, the Model 4441 resumes monitoring of all four channels for data activity. There are status LED's that indicate the unit is scanning, or whether the unit has established a dedicated connection to a single channel.

OPERATION:
The devices connected to channels A, B, C, and D of the Model 4441 contend for connection to the Common port device. Once activity is initiated on a source port A, B, C, or D, that channel is serviced. Connection is maintained while data activity is detected between pin 3, TD, of the DB9 source channel and pin 2, RD, of the DB9 destination / Common port. The signals supported by the Model 4441 are TD, RD, and SG.

While connected and data activity is present, the scanning is suspended. The channel is released and scanning is resumed only after data activity has been absent for a programmed timeout period, or if the channel is disabled via the front panel pushbutton switch.

The timeout period is selectable via a dipswitch located on the top circuit board inside the unit. The program switch is accessible by removing the four screws that fasten the top cover to unit. The Model 4441 is factory set for a one minute timeout period. To change the period, please refer to the Operation Manual.

If a connected device is streaming erroneous data, the user can use the front panel pushbutton switch to disable the channel and remove it from the scanning/monitoring function. Disabling the channel will allow the unit to continue to function as a port sharer among the remaining channels and connected devices.

Features:
- Allows four data channels, A/B/C/D, to contend for access to one Common port.
- Front panel LED's display channel scanning status and power status.
- Signals supported: TD, RD, and SG.
- Selectable timeout period.
- Front panel control allows disabling of any erroneous streaming data channel.

Specifications:
Port & Channel Connectors: (5) DB9 Female connectors labeled A, B, C, D and Common.
Front Panel Control: (1) Manual pushbutton allows local channel selection control.
Display: (5) Front panel LED's display sharer scanning and power status.
Power: UL approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC to the unit.
Dimensions: Desktop, 8.0" W x 8.0" D x 2.5" H
Weight: Approximately 3.5 lbs.

Custom Length DB9 Cables Available!

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1955

Model 7747 RS530 DB25 A/B Switch with Cut-Off and Remote Control Port

The PathWay Model 7747 RS530 A/B Switch with Cutoff and Remote Control provides switching in a low profile, 19-inch 1U rack unit. Enclosure dimensions are 19"W x 1.75"H x 8"D.

The Model 7747 allows the user the capability of sharing a single DB25 interface device connected to the "Common" port among two other DB25 devices connected to the A and B DB25 ports. The Model 7747 also allows the user to set the switch to the CUTOFF position, which stops any and all data throughput via the switch.

OPERATION:
The switch may be controlled locally by manually operating the front panel push button or remotely from the DB9 Control port located on the rear of the unit using either contact closures or an RS232 command interface. The front panel LED display indicates the switch position and power status.

All ports (A, B, and Common) of the switch are transparent to all data going through the switch. If power to the Model 7747 is removed, the switch will be automatically moved to the CUT-OFF position. When it is restored, the switch will move to the programmed default position.

Features:
- Switch one RS530 interface channel to either A, B, or full CUT-OFF for secure isolation.
- The DB25 connectors for A/B/COMMON ports are M/M/F.
- Switches all 25 pins of the DB25 interface.
- Switch locally via front panel pushbutton.
- Switch remotely via RS232 serial or contact closure signaling.
- If power is lost, the switch will safely move to Cutoff position until power is restored. Then it will recover to the programmed default position.
- Custom length cables available.

Specifications:
Port Connectors: (2) DB25 Male connectors labeled A and B, and (1) DB25 Female connector labeled Common.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (3) Front panel LED's display switch position and power status.
Remote Control: (1) DB9 Female connector on rear panel accepts Contact Closure or RS232 Serial Data for remote control operation.
Power: Power to the Model 7747 is supplied by way of rear panel Type 1 power connector. A power cord is supplied with the unit and plugs into a standard 115 VAC, 60 Hz receptacle.
Dimensions: Rackmount, 19.0" W x 8.0" D x 1.75" H.
Weight: Approximately 4.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1956

Model 8443 Dual-Channel RJ45 & BNC A/B Switch, Manual Operation

- Simultaneously Switches 1 Channel RJ45 (Cat 5) & 1 Channel BNC (RG59, 75 ohm)

The Model 8443 Dual-Channel RJ45/BNC A/B Switch Enables access to two devices per each of its two channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B. All channels are switched simultaneously The unit supports 8 pins for the RJ45 Cat5 interface, and supports both the center conductor and shield of the BNC interface.

Features:
- Simultaneously switches one RJ45 channel and one BNC channel locally via a knob located on the front panel.
- RJ45 channel tested for Cat5 compliance.
- Leads switched: All (8) RJ45 pins, plus BNC center conductor and shield.
- All ports located on the rear panel: (3) RJ45 female and (3) BNC female.
- Packaged in a rugged aluminum enclosure for EMI/RFI protection.
- Chassis size approximately 5.25" W x 2.0 H x 7.25" D.
- Switching is manually operated. Requires no power.
- Custom length cables are available.

Specifications:
Port Connectors:
(3) RJ45 (F), Category 5 connectors on rear panel
(3) BNC (F) connectors on rear panel.
Controls:
(1) Rotary Switch on front panel selects A or B.
Pins Switched:
RJ45: All 8 Pins Switched.
BNC: Center Conductor and Shield.
Power: No power required.
Enclosure: Shielded Aluminum Enclosure.
Dimensions: 5.25"W x 7.25" D x 2.0" H.
Weight: Approximately 2.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1958

Model 9225 Manual, Duplex, N-Type Coaxial, A/B Switch, Rackmount

Introduction:
The Model 9225 N-Type Coaxial A/B Switch allows the user the capability of sharing a single N-Type coaxial interface device connected to the Common port between two N-Type coaxial interface devices connected to ports A and B. The switch position is manually controllable via a highly reliable rotary selector switch located on the front panel.

Features:
- A manual rotary switch mounted on front panel allows for the A or B port to be switched to the Common port.
- The center pin and shell of each coaxial connector are switched.
- The switch ports are transparent to all data.
- Six N-Type Bulkhead Coaxial connectors mounted in a Duplex configuration (RX, TX) for the A, B, and Common ports.
- LMR-400 Coaxial cable is used for the internal wiring.
- Rugged aluminum package provides EMI/RFI shielding.
- No power is required.
- 19" rackmount enclosure that is a slim 1U (1.75") in height.
- Custom length N-Type coaxial cables available.

Specifications:
Port Connectors: (6) N-Type Coaxial Female connectors labeled A-TX, A-RX, B-TX, B-RX, and COMMON-TX, COMMON-RX.
Front Panel Control: (1) Rotary Switch allows local switching to position A or B.
Dimensions: Rackmount, 19.0" W x 1.75" H x 8.0"D.
Weight: Approximately 3.5 lbs.

Don't forget the cables!

Suggested Cables for Use with Model 9225 Switch:LMR-400 N-Type Coaxial Cables

#988186-006 6FT N-Male to N-Male LMR-400 Coaxial, Single Cable: $45.00
#988186-010 10FT N-Male to N-Male LMR-400 Coaxial, Single Cable: $50.00
#988186-015 15FT N-Male to N-Male LMR-400 Coaxial, Single Cable: $56.25
#988186-025 25FT N-Male to N-Male LMR-400 Coaxial, Single Cable: $68.75
#988186-XXX:
XXXFT N-Male to N-Male LMR-400 Coaxial, Single Cable: $37.50 + $1.25/FT

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1959

Model 9501 Quad Channel A/B Switch with Serial Remote Control
- Switch position can be manually controlled in the event of power loss.

The PathWay® Model 9501 Quad Channel A/B Switch with Serial Remote Control allows the user the capability of sharing a single port interface device connected to the COM port among two other devices connected to the A and B ports for each channel.

The switch may be controlled locally using the front panel rotary switches or remotely from a DB9/F port located on the rear of the unit using Serial ASCII Commands when the rotary switch is set to the REMOTE position. Switch position states may be attained locally via the front panel LED display or remotely using Serial Commands.

Features:
- The switch ports are transparent to all data.
- 17 Pins of the V.35 interface are switched. (Three V.35 channels)
- All pins of the DB25 interface are switched. (One DB25 channel)
- Local position control using the front panel rotary switches.
- Serial Remote Control to query the status of the Model 9501 and change its position only when rotary switch is set to REMOTE.
- Independent control of each channel.
- The front panel rotary switches allow manual switching of the Model 9501 at all times, including during power loss.
- The Model 9501 maintains position and continues to pass data during power loss while in the REMOTE position.
- Front panel LED's display the current switch position and the switch power status.
- Custom length DB25 and V.35 cable assemblies are available. Order your cables along with the switches for quick, plug & play, installation!

Specifications:
Port Connections: (9) V.35 female connectors labeled A, B, and Common provide input/output for the three V.35 channels. (3) DB25 female connectors labeled A, B and COMMON provide input/output for the DB25 channel.
Front Panel Controls: (4) Rotary switches allow local control.
Display: (8) Front panel LED's display switch position and power status.
Remote: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500 mA to the unit.
Dimensions: Rackmount configuration 19.0" W x 3.5" H x 10.0" D.
Weight: Approximately 8.0 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1975

Model 7281 RJ45 Cat5 Video Feed Controller Switch with Contact Control Remote Port

The PathWay Model 7281 Video Feed Controller Switch allows three video sources to be switched among two video monitors with the option of all sources being put in a cutoff position. The Model 7281 dimensions are 19"W x 1.75 "H x 8" D allowing the unit to occupy only 1U rack height.

The switch may be controlled remotely using a DB9 Contact Control Remote port located on the rear of the unit. The DB9 Remote port provides control by dry contact open/closure logic. The front panel LED display indicates the switch position and unit power status.

Features:
- all video source and monitor connectors are RJ45 Cat5/100mbps.
- All 8 pins of the port connectors are switched.
- Two video monitor connectors, A and B.
- Three video source connectors, 1, 2, and 3.
- One Remote DB9/Female port for two control commands:
Contact Controls, 1 and 2.
- Contact Control 1 and 2 are independent contact closures.
- Contact Control 1 controls switching of both monitor ports simultaneously between the Cutoff position and data flow. If the selection is to allow data to flow to the Monitors, then Monitor B can be switched between a Video Source 2 or 3.
- Contact Control 2 controls switching of the video source for Monitor B. The source can be either Video Source 2 or 3.
- Front panel LED indicators show the position of each switch. The LEDs show red when in position for data transmission, and blink when the switches are in cutoff position.
- All switches are remotely controlled. There is no local control.
- RJ45 connector pins for Ports A, B, and Common are divided up into groups of pins used for data transfer between Monitors and Video Sources.
- If the Model 7281 loses power, both monitors are switched to the Cutoff position.
- On power up, the switch positions are set based on the remote contact closures.

Specifications:
Port Connectors:
(2) RJ45 female connectors labeled Monitor A and B
(3) RJ45 female connectors labeled Video Source 1, 2, and 3.
Front Panel Control: There is no front panel control.
Remote: (1) DB9 female connector on rear panel accepts contact closure switch commands for Remote Control operation.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: Rackmount 19.0" W x 1.75" H x 8.0"D.
Weight: Approximately 4.5 lbs.

OPTION: WIDE RANGE POWER MODULE:
(Cat No 517277) CE and UL listed wall mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1984

Model 7355 Dual Cat5e RJ45 A/B/OFF-LINE Switch with 10/100 Base-T Remote Access and GUI

IP Addressable! Communicate with Switch via Internet Explorer running a PC.

The Model 7355 Dual Cat5E RJ45 A/B/OFFLINE Switch with 10/100 Base-T LAN Telnet Access and GUI, allows the user the capability of sharing a single port interface device connected to the Common port among two other devices connected to the A and B ports for each channel. Remote access can be accomplished using an Ethernet 10/100-Base-T connection and either Telnet commands or Graphical User Interface.

Proper authentication is required for remote access via the 10-Base-T connection. User can monitor status and control switch functions.

Features:
- The switch ports are transparent to all data.
- All pins of the RJ45 interface are switched.
- Interface meets Cat5e performance.
- All switched signals are passed via latching copper contact relays that maintain their position and continuity even in the event of a power loss.
- Local control of switch position from front panel pushbuttons.
- Remote Control of the switch position from a 10/100Base-T LAN Ethernet environment.
- Remote Telnet command interface or Graphical User Interface that allow the user to control switch position, lockout front panel access, and obtain switch status.
- Front panel LEDs display switch position for each channel as well as power status.

Software Features:
- Access User Interface via standard web browser.
- Login password authentication required.
- Easy to use, simple point and click operation.
- Remotely access to control or monitor the Model 7355 Dual RJ45 A/B/OFFLINE Switch System.
- Users can change the login password and/or the switch's IP address.
- LAN access gives users across the LAN or over the Internet access to control if user network is configured accordingly.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1988

Model 5528 Single Channel 3-State SVCN/GPCN/OFFLINE RJ45 Cat5e Switch

The PathWay 5528 allows the user the capability of accessing two separate devices, ports, SVCN and GPCN, via connection through a device connected to the ROOM port. Users can link this model to the Model 5527 SVCN/GPCN/OFF-LINE Display Indicator unit for a robust conference communications switching system. The dimensions of the unit are 1.75"H x 8"D x 19"W and the unit mounts in a standard 19" equipment rack. The unit weight is approximately 4.5 lbs.

Features:
- The switch ports are transparent to all data.
- All pins of the RJ45 interface are switched.
- Interface meets Cat5e performance.
- Unit switched via front panel keylock actuator.
- Unit permits signal to pass uninterrupted (SVCN and GPCN positions) or isolates in/out copper (OFFLINE position).
- Status Out port for linking switch system unit to the Model 5527 SVCN/GPCN/OFF-LINE Display Indicator Unit.
- Installs in a standard 19" wide equipment rack.
- The front panel indicator LED's on the Model 5528 will display the position status of the unit.
- The position of the Model 5528 will follow the keylock actuator position at all time swhen there is power to the switch.
- In the event power is lost, the switch will revert to Off-Line status regardless of the keylock position. When power is restored, the unit will automatically read and match the switch position indicated by the keylock actuator.
- The key can only be removed from the keylock actuator in the OFFLINE position.

OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Specifications:
Port Connectors: (3) RJ45 female connectors labeled SVCN, GPCN, and ROOM.
Front Panel Controls: (1) Three-position keylock actuator.
Display: (3) Front panel LED's display switch position and power status.
Status Out: (1) DB9 (F) port allows linking the Model 5528 switch to a remote large character alpha display unit, Model 5527. Contact closures indicate switch position: OFFLINE, SVCN, GPCN.
Power: UL Approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: 19" W x 1.75" H x 8.0" D.
Weight: 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1989

Model 9450 DB25 Voice/Data A/B Switch with Half Rack & Full Rackmount Enclosure

The Model 9450 DB25 Voice/Data A/B Switch allows the user to switch Common equipment to either VOICE or DATA ports with a simple flip of a switch. The unit supports all 25 pins of the DB25 interface. No need to plug and unplug cables, thereby eliminating connector wear.

Features:
- Manual, Single Channel A/B Switch in Slim Rackmount enclosure.
- DB25-Female Connectors used for the VOICE, DATA, & COMMON ports.
- Manual control means no power supply necessary.
- Switching mechanism is a sealed precious metal contact switch.
- All 25 pins supported.
- 1U Rackmount enclosure dimensions: 19" W x 1.75" H x 7.5" D
- All aluminum enclosure provides effective EMI/RFI shielding.
- Custom length cables available.

Specifications:
Connectors: (3) DB25(F) Connectors on rear panel labeled VOICE, DATA, and COMMON.
Controls: (1) Rotary Switch on front panel selects VOICE or DATA
Pins Switched: 25 pins switched.
Power: No power required.
Enclosure: Aluminum slim rackmount enclosure.
Dimensions: 19" W x 1.75" H x 8.0" D.
Weight: Approximately 2 lbs.

Private Labeling Option: ESL switches may be Custom/Private Labeled. Ask for quote.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1994

Model 9503 Tri-Channel Switch, DB25 A/B/C/D/E/F, DB25 A/B and BNC A/B, Manual, Rackmount

The Model 9503 Switch system is comprised of three independent sharing switches efficiently packaged in a 19-inch wide 2U high (3.5") rackmount unit. The switch functions are described and illustrated below.

Features:
- Independently switch each of the three channels manually via three knobs located on the front panel, one knob per channel.
- Channel 1: DB25 A/B/C/D/E/F Switch with (7) DB25 female connectors for ports A, B, C, D, E, F and Common, all 25 leads switched.
- Channel 2: DB25 A/B Switch with (3) DB25 female connectors for ports A, B, and Common, all 25 leads switched.
- Channel 3: BNC A/B Switch with (3) BNC female connectors for ports A, B, and Common, center conductor and shield switched.
- All ports located on rear panel.
- Rackmount style chassis, 19" Wide x 3.5" High x 8" Deep.
- Manual operation. No power required.
- High reliability, precious metal, sealed switches.
- Custom length DB25 cables and BNC cables are available for your switch installation.

Specifications:
Channel-1 Port Connectors: (7) DB25 female connectors labeled A, B, C, D, E, F, and Common.
Channel-2 Port Connectors: (3) DB25 female connectors labeled A, B, and Common.
Channel-3 Port Connectors: (3) BNC female connectors labeled A, B, and Common.
Front Panel Controls: (3) Manual rotary switches allow local switching.
Dimensions: Rackmount 19.0" W x 3.5" H x 8.0" D.
Weight: Approximately 5.0 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1995

Model 7201 DB9 A/B/C/D Switch with Remote Control, Desktop

The PathWay Model 7201 DB9 Interface A/B/C/D Switch provides switching in a compact, desktop unit. It allows the user the capability of sharing a single DB9 interface device connected to the Common port among four other devices connected to the A, B, C, and D ports.

The Model 7201 can be switched locally by using its front panel pushbutton or remotely from the DB9/female RS232 serial interface remote port located on the rear of the unit. The front panel LED display indicates the switch position and unit power status.

Features:
- The switch ports are transparent to data format.
- All nine (9) pins of the DB9 interface are switched.
- Local control of switch position via front panel pushbutton.
- The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
- The unit maintains last set position in the event of power loss and continues to pass data.
- Front panel LED's display the current switch position and power status.
- Desktop configuration is standard.

Specifications:
Port Connectors: (5) DB9(F) connectors labeled A, B, C, D and Common.
Remote Control: (1) DB9(F) connector labeled REMOTE accepts RS232 serial data ASCII commands.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (4) LED's labeled A, B, C, and D display switch position and (1) LED labeled POWER displays power status.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500 mA to the unit.
Dimensions: Desktop configuration 2.4" H x 8.0" W x 7.25" D.
Weight: Approximately 4.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1996

Model 7234 Quad-Channel RJ45 A/B Switch with Remote Control Port

The Model 7234 4-Channel RJ45 A/B Switch provides four channel switching in a low profile, 19-inch 1U rack unit. All four channels are switched simultaneously. Front panel LED's indicate switch position and power status.

Local Switching: Simply press the front-panel pushbutton and the switch will change to the newly selected position as indicated by front-panel LED's.

Remote Switching: Accomplish the transition from open to closed or closed to open via a single set of contacts connected across pins 1 & 2 of the DB9/Female REMOTE connector port.

A transition to open contacts across pins 1 & 2 of the DB9 connector causes all four channels to switch to the A position.
A transition to closed contacts across pins 1 & 2 of the DB9 connector causes all four channels to switch to the B position.
Upon initial power to the unit, the unit will read the REMOTE port to determine the power up position state. IF there are no connections to the REMOTE port connector, pins 1 & 2 are open, thus the unit will default to all four channels in the A position.

Features:
- Switch ports are transparent to all data.
- All (8) signals of each of the four channels, (32) total signals, switched simultaneously.
- Pushbutton control override.
- Remote control via DB9/female Control Port on rear panel
TRANSITION to Open contact = all channels position A
TRANSITION to Closed contact = all channels position B
Power-up Default (no remote cable in place) = position A
- Front panel LED's display switch position and power status.
- 19" Rackmount, 1U high (1.75")

OPTION: Wide Range Power Module
(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Specifications:
Data Connectors: (12) RJ45 female connectors; labeled A, B, and Common for each channel.
Control: (1) Manual Pushbutton allows local switching.
Display: (2) Front panel LED's display switch position and power status.
Remote Control: (1) DB9 female connector on rear panel accepts contact closure switch commands for Remote Control operation.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12VDC, 500mA to the unit.
Dimensions: 19.0"W x 8.0" D x 1.75" H
Weight: Approx 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1997

Model 7292 Crossover Switch, DVI-D Dual Link and DB9 Connectors, Solid State with Contact Closure Remote Port

The PathWay Model 7292 Crossover Switch, DVI-D Dual Link and DB9 Connectors, Solid State with Contact Closure Remote Port supports connections between four sets of devices or peripherals connected to ports A, B, C, and D, in two different switch positions: Normal and Crossover. The Model 7292 is compactly enclosed in a low profile, 19-inch 1U rack unit.
The switch may be controlled locally or remotely.

Features:
- The ports are transparent to all data.
- All 18 signal pins of the DVI-D Dual Link 24-pin connectors and all 9 Pins of the DB9 connectors are switched.
- The DVI-D Dual Link signals are switched via solid state components using true DVI driver circuitry.
- The signals of the DB9 connector are switched via solid state components.
- In NORMAL mode, the A port is connected to the C port and the B port is connected to the D port.
- In CROSSOVER mode, the A port is connected to the D port and the B port is connected to the C port.
- Front panel LEDs display the current switch position and power status.
- Manual operation accomplished by the use of a front panel pushbutton.
- The DB9 REMOTE port provides access to remotely control the unit by dry contact open/closure logic.
- Remote contact closure allows for lockout of the front panel pushbutton.
- The switch will not continue to pass data in the event of power loss.
- Switch powers up in last known position on power cycle.

Specifications:
Port Connectors:
- "A" device ports of the switch:
(1) DVI-D Dual Link Female Connector, Sink, and
(1) DB9/F Connector
- "B" device ports of the switch:
(1) DVI-D Dual Link Female Connector, Sink, and
(1) DB9/F Connector
- "C" device ports of the switch:
(1) DVI-D Dual Link Female Connector, Source, and
(1) DB9/F Connector
- "D" device ports of the switch:
(1) DVI-D Dual Link Female Connector, Source and
(1) DB9/F Connector

Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (2) Red LED's display switch position and power status.
Remote Control Port: (1) DB9 female connector on rear panel accepts contact closure switch commands for Remote Control operation.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12VDC, 500 mA to the unit.
Dimensions: 19.0" W x 1.75" H x 12.0" D.
Weight: Approximately 5.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1997

Model 7350 Tri-Channel DB25 A/B Switch, with Remote Control, 1U Rackmount

The PathWay Model 7350 Tri-Channel DB25 A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's three channels. The Model 7350 dimensions are 19" W x 1.75" H x 8" D.

The switch may be controlled manually via front panel pushbuttons or remotely from an RS232 serial port located on the rear of the unit.
Switch position states may be attained via the front panel LED displays or the Remote Control RS232 serial port (DB9) located on the rear of the unit.

Features:
- The switch ports are transparent to all data.
- Pins 1-8 and 20 of the DB25 interface are switched.
- Each channel is an individual switch that is commanded separately from the other switches in the unit.
- Front panel pushbutton controls can be locked out remotely.
- Remote commands to switch each cahnnel individually or all channels simultaneously.
- Remote commands to obtain channel switch position and lockout status.
- Each channel maintains last set position on power loss and continues to pass data.
- Front panel pushbutton control or Remote ASCII Command access through the serial port.
- Front panel LEDs display the current switch position of each channel and power status.

Specifications:
Port Connectors: (9) DB25 female connectors labeled A, B, and Common (three for each channel).
Front Panel Controls: (3) Manual pushbuttons allow local switching.
Display: (6) Front panel LED's display switch position and power status.
Remote: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
Power: UL approved wall mount 120VAC, 60Hz power module supplies 12 VDC, 500mA to the unit.
Dimensions: Rackmount configuration 19" W x 1.75" H x 8" D.
Weight: Approximately 4.5 lbs

Wide Range Power Option Available:
(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2001

Model 7248-ESL Dual Channel RS530 A/B Switch w/Cutoff with Remote Control Port

The PathWay Model 7248-ESL Dual Channel RS530 A/B Switch with Cutoff and Remote Control provides two channel switching in a low profile, 19-inch 1U rack unit. The unit's dimensions are 19" W x 1.75" H x 8" D.

Channel One allows the user the capability of sharing a single DB25(F) interface device connected to the COMMON port among two other DB25(M) devices connected to the "A" and "B" DB25 ports.

Channel Two allows the user the capability of sharing a single DB25(M) interface device connected to the COMMON port among two other DB25(F) devices connected to the "A" and "B" DB25 ports. Both channels allow the user to set the switches to the CUTOFF position, which stops any and all data throughput for the switch. The switch may be controlled locally by manually operating the front panel pushbuttons or remotely from the DB9 Control port located on the rear of the unit using either contact closures or an RS232 command interface. The front panel LED displays indicate the respective switch position and unit power status.
All ports (A, B, and COMMON) for each switch are transparent to all data going through that switch. If power to the Model 7248-ESL is removed, both switches automatically move to the CUTOFF position. When it is restored, each switch will move to the programmed default position.

Features:
- Both Channels offer A / B / CUTOFF switch positions with remote control.
- Channel One and Two are RS530 compatible.
- Remote switching via contact closure of specified pins of DB9 Remote port on rear panel or remotely controlled using an RS232 terminal interface.
- Local switching via two front panel pushbuttons.
- All (25) pins of the DB25 RS530 interface connector are switched simultaneously.
- Local switch change sends ASCII text over the RS232 interface to notify the user of the new switch position.
- All ports are located on the rear panel.
- Status LED's on the front panel indicate the switch position & power status.
- Either channel can be set to CUTOFF position, which stops any and all data throughput for the switch.
- Unit mounts in standard 19" equipment rack, 1U space.

Specifications:
Channel 1 Port Connectors: (3) DB25 (M/M/F) connectors labeled A, B, and COMMON, respectively.
Channel 2 Port Connectors: (3) DB25 (F/F/M) connectors labeled A, B, and COMMON, respectively.
Front Panel Controls: (2) Manual control pushbuttons on front panel: one for channel 1 and one for channel 2.
Remote Control: DB9 female connector on rear panel accepts contact closure or RS232 serial data.
Local Display: (6) LEDs on front panel display switch position and power status.
Power: UL Approved, 115 VAC, 60 Hz wall mount power supply.
Dimensions: 1.75" H x 19.0" W x 8.0" D.
Weight: 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2005

Model 7245-ESL Dual Channel RS530 Switch and Fiber Optic ST Duplex Secure/Non-Secure Switch w/Cutoff

The Model 7245-ESL Dual Channel RS-530 and ST Duplex (1300nm wavelength) Fiber Optic Secure/Non-Secure Switch with Cutoff provides two channel switching in a low profile, 19-inch 1U rack unit. The unit's dimensions are 19" W x 1.75" H x 8" D.

Channel One allows the user the capability of sharing a single DB25(F) interface device connected to the COMMON port among two other DB25(M) devices connected to the SECURE and NON-SECURE DB25 ports.

Channel Two allows the user the capability of sharing a 10/100 Base-T device connected to the COMMON port among two ST Duplex (1300nm wavelength) Fiber Optic devices connected to the SECURE and NON-SECURE Fiber Optic ports. Both channels allow the user to set the switches to the CUTOFF position, which stops any and all data throughput for the switch.

The switches may be controlled locally by manually operating the front panel pushbuttons or remotely from the DB9 Control port located on the rear of the unit using either contact closures or an RS232 command interface. The front panel LED's display switch position and power status.

All ports (SECURE, NON-SECURE, and COMMON) are transparent to all data. If power to the Model 7245-ESL is removed, both switches will automatically move to the CUTOFF position. When power is restored, each switch will move to the programmed default position.

Features:
- Both Channels offer SECURE / NON-SECURE / CUTOFF switch positions with remote control.
- Channel One is RS530 compatible. All 25 pins are switched.
- Channel Two is Fiber Optic ST Duplex, multimode. Wavelength 1300 nm, fiber size 62.5/125 micron, 100 Meg data rate.
- Remote switching via DB9 Remote port on rear panel.
- Local switching via two front panel pushbuttons.
- Local switch change sends ASCII text over the RS232 interface to notify the user of the new switch position.
- All ports are located on the rear panel.
- Status LED's on the front panel indicate the switch position & power status.
- Either channel can be set to CUTOFF position, which stops and and all data throughput for the switch.

Specifications:
Channel 1 Port Connectors: (3) DB25 (M/M/F) connectors labeled SECURE, NON-SECURE and COMMON, respectively.
Channel 2 Port Connectors: (2) Fiber Optic ST Duplex connectors labeled SECURE and NON-SECURE, (1) RJ45 (F) connector labeled COMMON.
Front Panel Controls: (2) Manual pushbuttons allow local switch of channels 1 and 2.
Remote Control: DB9 female connector on rear panel accepts contact closure or RS232 serial data.
Local Display: (6) LEDs on front panel display switch position and power presence.
Power: 115 VAC, 60 Hz wall mount supply.
Dimensions: 1.75" H x 19.0" W x 8.0"D.
Weight: 4.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2003

Model 7249-ESL Dual Channel RS530 Secure/Non-Secure Switch and RJ45 A/B Switch with Cutoff

The Model 7249-ESL Dual Channel RS530 SECURE/NON-SECURE and RJ45 AB Switch provides two channel switching in a low profile, 19-inch 1U rack unit.

Channel One allows the user the capability of sharing a single DB25(F) interface device connected to the Common port among two other DB25(M) devices connected to the SECURE and NON-SECURE DB25 ports. All 25 pins are switched.

Channel Two allows the user the capability of sharing a single RJ45 device connected to the Common port with two other RJ45 devices connected to the "A" and "B" RJ45 ports. Both channels allow the user to set the switches to the CUTOFF position, which stops any and all data throughput for the switch. All 8 pins are switched.

Features:
- Two independent switch channels.
- Local control via manually operated front panel pushbuttons.
- Remote Control via CONTROL port that accepts ASCII, RS232 serial data commands or contact closure signaling.
- LED's indicate switch position and power status.
- If power is lost, both channels automatically switch to CUTOFF position.
- When power is restored, each channel will switch back to its programmed default position.
- Custom length interconnection DB25 and RJ45 cables are available.

Specifications:
Channel 1 Port Connectors: (3) DB25 (M/M/F) connectors labeled SECURE, NON-SECURE, and COMMON respectively.
Channel 2 Port Connectors: (3) RJ45(F) shielded connectors labeled A, B, and COMMON.
Front Panel Control: (2) Manual pushbuttons allow switching of channels 1 and 2.
Display: (6) Front panel LED's display switch position and power status.
Remote Control: (1) DB9 Female connector on rear panel accepts Contact Closure or RS232 Serial Data for remote control operation.
Power: Internal power supply accepts 115 VAC, 60 Hz. A power cable is supplied with the unit.
Dimensions: Rackmount, 19.0" W x 8.0" D x 1.75" H.
Weight: Approximately 4.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2004

Model 7246-ESL Dual Channel RS530 Switch and RJ45 Secure/Non-Secure Switch w/Cutoff

The Model 7246-ESL Dual Channel RS530 and RJ45 Secure/Non-Secure Switch with Cutoff provides two channel switching in a low profile, 19-inch 1U rack unit. The unit's dimensions are 19" W x 1.75" H x 8" D.

Channel One allows the user the capability of sharing a single DB25(M) interface device connected to the Common port among two other DB25(F) devices connected to the SECURE and NON-SECURE DB25 ports.

Channel Two allows the user the capability of sharing an RJ45 device connected to the Common port among two other RJ45 devices connected to the SECURE and NONSECURE RJ45 ports. Both channels allow the user to set the switches to the CUTOFF position, which stops any and all data throughput for the switch.

The switch may be controlled locally by manually operating the front panel pushbuttons or remotely from the DB9 Control port located on the rear of the unit using either contact closures or an RS232 command interface. The front panel LED displays indicate the respective switch position and unit power status.

All ports (SECURE, NON-SECURE, and COMMON) for each switch are transparent to all data going through that switch. If power to the Model 7246-ESL is removed, both switches will automatically move to the CUTOFF position. When it is restored, each switch will move to the programmed default position.

Features:
- Both Channels offer SECURE/NON-SECURE/CUTOFF switch positions with remote control.
- Channel One is RS530 compatible. All 25 pins switched.
- Channel Two is RJ45 compatible. All 8 pins switched.
- Remote switching via contact closure of specified pins of DB9 Remote port on rear panel or remotely controlled using an RS232 terminal interface.
- Local switching via two front panel pushbuttons.
- Local switch change sends ASCII text over the RS232 interface to notify the user of the new switch position.
- All ports are located on the rear panel.
- Status LED's on the front panel indicate the switch position & power status.
- Either channel can be set to CUTOFF position, which stops any and all data throughput for the switch.
- Unit mounts in a standard 19" equipment rack, 1U space.

Specifications:
Channel 1 Port Connectors: (3) DB25 (F/F/M) connectors labeled SECURE, NON-SECURE and COMMON, respectively.
Channel 2 Port Connectors: (2) RJ45(F) connectors labeled SECURE, NON-SECURE and COMMON.
Front Panel Controls: (2) Manual pushbuttons on front panel.
Remote Control: DB9 female connector on rear panel accepts contact closure or RS232 serial data.
Local Display: (6) LEDs on front panel display switch position and power presence.
Power: 115 VAC, 60 Hz wall mount power supply.
Dimensions: 1.75" H x 19.0" W x 8.0" D.
Weight: 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2002

Model 5534 Single Channel 4-State OFF/SVCN/JSIS/GPCN RJ45 Cat5e Switch
- Ideal for secure conference room communication applications.

The Model 5534 allows the user the capability of accessing three separate devices ports SVCN, JSIS, and GPCN via connection through a device connected to the ROOM port. Users can link this model to the Model 5533 OFF/SVCN/JSIS/GPCN Display Indicator unit for a robust conference communications switching system. The dimensions of the unit are 1.75"H x 8"D x 19"W and the unit mounts in a standard 19" equipment rack.

Features
- Manually operated by the keylock. No power is required to operate unit.
- The position of the Model 5534 will follow the keylock actuator position at all times.
- The key can only be removed from the keylock actuator in the OFF position.
- The switch ports are transparent to all data.
- All pins of the RJ45 interface are switched.
- Interface meets Cat5e performance.
- The front panel indicator LED's on the Model 5534 will display the position status of the unit when linked to a power Model 5533 unit.
- Unit permits signal to pass uninterrupted (SVCN, JSIS, and GPCN positions) or isolates in/out copper (OFFLINE position).
- Status ports for linking switch system unit to the Model 5533 OFF/SVCN/JSIS/GPCN Display Indicator unit.
- Installs in a standard 19" wide equipment rack.

Specifications:
Port Connectors: (4) RJ45 female connectors labeled GPCN, JSIS, SVCN, and ROOM.
Front Panel Controls: (1) Four-position keylock actuator.
Display: (4) Front panel LED's display switch position and power status.
Status Ports: (2) DB9 (F) ports allow linking the Model 5534 switch to a remote large character alpha display unit, Model 5533. Custom port contact closures indicate switch position: OFF, SVCN, JSIS, and GPCN.
Power: No power required to operate the switch. Power for LED's provided from connection to the Model 5533 Display Unit.
Dimensions: 19" W x 1.75" H x 8.0" D.
Weight: 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2006

Model 5533 OFF/SVCN/JSIS/GPCN Display Indicator Unit

Introduction
The Model 5533 is designed to display the isolation/connection status of communications equipment. This equipment comprises a switching system that includes the Model 5534 Single Channel 4-State Cat5e switch. Users can link these units to create a robust conference communications switching system. The dimensions of the Model 5533 are 1.75"H x 8"D x 19"W and the unit mounts in a standard 1U equipment rack. The unit weight is approximately 2.0 lbs.

Features
- Large display of important isolation/connection status of secure communication networks.
- The front panel LED Display on the Model 5533 will display the OFF/SVCN/JSIS/GPCN status of the switch system.
- Has a DB9(F) Control port for linking the Model 5533 Display Unit to the Model 5534 Switch that it is monitoring.
- This unit also supplies power to the LED's of the companion Model 5534 Switch.
- UL and CE approved wall mount power module supplies 12VDC, 500mA to the Display Indicator Unit.
- Installs in a standard 19" wide equipment rack.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2007

Model 9716 16-Channel RJ45 Cat5e Compliant A/B Switch, Manual, Individual Channel Control, Rackmount

With each of its sixteen channels, the Model 9716 RJ45 A/B switch allows the user to access two RJ45 devices connected to its A and B ports with one RJ45 device connected to its COMMON port. Each of the sixteen channels is switched individually via its respective knob located on the front panel.

Features:
- 16 Front panel knobs provide individual control of each channel.
- Manually operated, no power required.
- Rated for 10/100/1000 networks (Up to Cat5e).
- All 8 pins switched. Allows compatibility with all RJ45 interfaces.
- All RJ45 ports are loated on the rear panel.
- Rackmount enclosure, (2U high).
- Custom length Cat5e RJ45 cables available.

Specifications:
Port Connectors: (48) RJ45 (F) connectors. Each of the 16 channels has a set of three connectors labeled A, B, and Common.
Front Panel Control: (16) Knobs allow local switching.
Power: No power required. Manually operated.
Dimensions: Rackmount 19.0" W x 3.5" H x 8.0" D.
Weight: Approximately 7.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2008

Model 8275 RJ45 A/B Switch, Manual, Cat5e Compliant, Shielded RJ45 Ports, 6-32 Mounting Screw Holes

The Model 8275 RJ45 A/B Switch allows the user to access two RJ45 devices connected to its A and B ports with one RJ45 device connected to its COMMON port. The unit is a manually operated switch, requiring no power. Port selection is quick and easy via a front panel rotary selector switch.

Features:
- Designed to accomodate secure fastening to a flat surface, the unit has four mounting holes (6-32 threaded) on the chassis bottom.
- Manual control of switch position via a knob located on front panel.
- Switches all 8 leads of the RJ45 interface.
- Rated for 10/100/1000 networks (Up to Cat5e).
- All (3) shielded RJ45 female ports A, B, and Common are located on rear panel.
- All port shields are grounded to the chassis.
- Aluminum case provides EMI/RFI shielding.
- Maximum mounting screw length from bottom of chassis is 0.35".
- Custom length Cat5e RJ45 cables available.

Specifications:
Port Connectors: (3) Shielded RJ45 female connectors labeled A, B, and Common.
Front Panel Control: (1) Rotary selector switch allows local switching.
Power: No power required. Manually operated.
Dimensions: Desktop, 5.25" W x 2.0" H x 7.25" D.
Weight: Approximately 1.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2013

Model 7242DT DB25 A/B Switch, Desktop with 10-BASE-T Remote Interface
- IP Addressable

The PathWay 7242DT Single Channel RS232/RS530 DB25 A/B Switch provides one channel switching in a desktop unit. The user has the capability of sharing a single DB25 interface device connected to the Common port among two other devices connected to the A and B ports.

The switch may be controlled locally by manually operating the front panel pushbutton or remotely over the 10-Base-T RJ45 remote port located on the rear of the unit. The front panel LED display indicates the switch position, unit power status and network status.

LOCAL SWITCHING is achieved by simply pressing the front panel pushbutton. The switch will change to the newly selected position as indicated by the front panel position LED's, A and B. The LINK and STATUS LED's indicate the status when the 10-Base-T Control port is connected to a network.

REMOTE SWITCHING of the unit is done through the 10-Base-T Control port on the rear panel. This Control interface has an addressable IP address and listens on the standard TELNET port (23) for incoming connection. When connected, the unit responds to the Remote Command Set.

FEATURES:
- DB25(F) ports are transparent to all data.
- Switch from front panel pushbutton, or remotely via IP addressable 10-BASE-T port.
- All 25 pins of the DB25 interface are switched.
- LED's display switch position, unit power and network status.
- Switch maintains position and continues to pass data during power loss.
- Remote command for lock out of front panel pushbutton.
- Remote command for query of current switch state.
- Custom length DB25 data cables available.

Specifications:
- Port Connectors: (3) DB25 female connectors labeled A, B, and COMMON.
- Front Panel Control: (1) Manual pushbutton allows local switching.
- Display: (4) Front panel LED's display switch position, power status, and network status.
- Remote: (1) RJ45 female connector on rear panel accepts 10-Base-T LAN access Ethernet or Remote Control operation.
- Power: WIDE RANGE CE and UL listed table mount power module (Cat.No. 518438) 100VAC/240VAC, 50Hz/60Hz. Ideal for international applications.
- Dimensions: Desktop, 17.0" W x 1.75" H x 8.0" D.
- Weight: 4.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2009

Model 9453 Dual-Channel RJ45 Cat5e Compliant A/B/C Switch, Manual, Simultaneous Switching, Rackmount

With each of its two channels, the Model 9453 RJ45 A/B/C Switch allows the user to access three RJ45 devices connected to its A, B, and C ports with one RJ45 device connected to its COMMON port. The two channels are switched simultaneously via a knob located on the front panel.

Features:
- Manually switch two channels simultaneously via one knob located on the front panel.
- Rated for 10/100/1000 networks (Up to Cat5e)
- Switches all (8) leads of the RJ45 interface.
- All (8) RJ45 female ports located on rear panel (2) A ports, (2) B ports, (2) C ports and (2) Common ports.
- All alluminum case provides EMI/RFI shielding.
- Chassis, 19" W x 1.75" H x 8"D.
- Custom length Cat5e RJ45 cables available.

Specifications:
Port Connectors: (4) RJ45 (F) connectors labeled A, B, C, and COMMON for Channel 1 and (4) RJ45 (F) connectors labeled A, B, C, and COMMON for Channel 2.
Front Panel Control: (1) Rotary selector switch allows local switching.
Power: No power required. Manually operated.
Dimensions: Rackmount 19.0" W x 1.75" H x 8.0" D.
Weight: Approximately 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2015

Model 9076 RJ45 A/B Switch, Manual, DIN Rail Mounted, Cat5e Compliant

- Convenient DIN rail mounting, ideal for use in process control systems.

The Model 9076 RJ45 A/B switch allows the user to access two RJ45 devices connected to its A and B ports with one RJ45 device connected to its COMMON port. The unit is a manually operated switch, requiring no power. Port selection is quick and easy via a front panel rotary selector switch. The Model 9076 switch is easily integrated as a system component by utilizing its rear panel DIN rail mounting bracket.

Features:
- Allows (1) Common RJ45 port to be shared among either of (2) RJ45 ports A and B.
- Manual operation via front panel mounted rotary switch.
- Switches all 8 leads of the RJ45 interface.
- Certified for category 5e compliance.
- Manually operated. No power required.
- Aluminum case provides EMI/RFI shielding.
- Din-rail bracket on rear panel.
- Grounding screw is mounted on the front panel.
- Custom length Cat5e RJ45 cables available.

Specifications:
Port Connectors: (3) RJ45 female connectors labeled A, B, and Common.
Front Panel Control: (1) Rotary selector switch allows local switching.
Power: No power required. Manually operated.
Enclosure: Shielded Aluminum Enclosure.
Dimensions: DIN Rail Mount Package: 1.75"W x 4.25"H x 6.0"D.
Weight: Approximately 1.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2014

Model 9074 RJ45 A/B/OFFLINE Switch, Manual, DIN Rail Mounted, Cat5e Compliant

- Convenient DIN rail mounting, ideal for use in process control systems.

Model 9074 RJ45 A/B/OFFLINE switch allows the user to access two RJ45 devices connected to its A and B ports with one RJ45 device connected to its Common port, or to isolate all ports by switching to OFFLINE position. The unit is a manually operated keylock switch, requiring no power. Port selection is quick and easy via front panel keylock switch. The Model 9074 switch is easily integrated as a system component by utilizing its rear panel DIN rail mounting bracket.

Features:
- Allows (1) Common RJ45 port to be shared among either of (2) RJ45 ports A and B, or isolate all ports by switching to OFFLINE position.
- Manual operation via front panel mounted keylock switch.
- Switches all 8 leads of the RJ45 interface.
- Certified for category 5e compliance.
- Manually operated keylock switch. No power required.
- Din-rail bracket on rear panel.
- Grounding screw is mounted on the front panel.
- Custom length Cat5e RJ45 cables available.

Specifications:
Port Connectors: (3) RJ45 female connectors labeled A, B, and Common.
Front Panel Control: (1) Keylock switch allows local switching.
Power: No power required. Manually operated.
Enclosure: Shielded Aluminum Enclosure.
Dimensions: DIN Rail Mount Package: 1.75"W x 4.25"H x 6.0"D.
Weight: Approximately 1.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2016

Model 9093 Dual-Channel DB9 A/B/C Switch, Manual, Simultaneous Switching, Rackmount

With each of its two channels, the Model 9093 DB9 A/B/C Switch allows the user to access three DB9 devices connected to its A, B, and C ports with one DB9 device connected to its Common port. The two channels are switched simultaneously via a knob located on the front panel. See the application diagram below.

Features:
- Simultaneously switches two DB9 channels via the front panel rotary switch.
- All 9 pins of the DB9 interface are switched.
- Eliminates the need to plug and unplug cables.
- Transparent to data speed and format.
- High quality sealed switch with self-wiping precious metal contacts.
- No external power required.
- Improves computer network efficiency by allowing sharing of peripherals.
- Attractive anodized black box packaging provides EMI/RFI shielding.
- Rackmount configuration, with dimensions: 19" W x 1.75" H x 8.0" D.
- Weight: 4.5 lbs (2.0 kg).
- Standard or custom length cables available for your switch installation.

Specifications:
Port Connectors: (3) DB9 (F) connectors labeled A, B, and C as well as (1) DB9 (M) for Channel 1, and (3) DB9 (F) connectors labeled A, B, and C, as well as (1) DB9 (M) for Channel 2.
Front Panel Control: (1) Rotary selector switch allows local switching.
Power: No power required. Manually operated.
Dimensions: Rackmount 19.0" W x 1.75" H x 8.0" D.
Weight: Approximately 4.5 lbs (2.0 kg).

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2026

PathWay® Model 7250 Single Channel DB37 A/B Switch

The PathWay® Model 7250 Single Channel DB37 A/B Switch allows the user the capability of sharing a single port interface device connected to the COMMON port among two other devices connected to the A and B ports.

The unit may be quickly and conveniently switched between states A and B by depressing its front-panel pushbutton.

Features:
Allows quick connection to any one of two devices from one Common device.
Switches 36 pins of the DB37 interface (Pins 2 thru 37). Pin 1 is carried through.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Local control via front-panel pushbutton.
Front panel LED's display switch position and power status.
Retains last switch position even in the event of power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB37 cables available for your switch installation.

Specifications:
Port Connectors:
(3) DB37 female connectors on rear panel are labeled A, B, and Common.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (2) Front panel LED's display switch status, and power status.
Power: UL approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: Desktop 13.5" W x 2.5" H x 7.25" D.
Weight: Approximately 4.5 lbs.

All ESL products are available for export.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2037

Model 7213 8-to-1 DB9 Switch with RS232 Serial Remote
- Outstanding DB9 Interface Switching Capability in Only 1U Height!

The PathWay Model 7213 8 to 1 DB9 Switch with RS-232 Serial Remote allows the user the capability of sharing a single port interface device connected to the COM port among eight other devices connected to the A, B, C, D, E, F, G, and H ports.

The switch may be controlled locally by the front panel pushbuttons or remotely from a DB9/F port located on the rear of the unit using Serial ASCII Commands. Switch position states may be attained locally via the front panel LED display or remotely using Serial Commands.

Features:
- Allows access to eight networks from one computer or workstation.
- Switches all 9 pins of the DB9 interface.
- Eliminates the need to plug and unplug cables.
- Transparent to data speed and format.
- Local control via front-panel pushbutton.
- Remote control port allows off-site monitoring and switch management.
- The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
- Front-panel pushbutton control can be locked out, remotely.
- Front panel LED's display switch position and power status.
- Retains last switch position even in the event of power loss and continues to pass data.
- Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB9 data cables for this switch are available.

Specifications:
- Port Connectors: (9) DB9 female connectors labeled A, B, C, D, E, F, G, H and COMMON.
- Front Panel Control: (8) Manual pushbuttons allow local switching.
- Display: (8) Front panel LED's display switch position and power status.
- Remote Control: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
- Power: UL approved 120VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
- Dimensions: Desktop, 19.0"W x 1.75" H x 10.0"D. (48.2 x 4.4 x 25.4 cm)
- Weight: Approximately 5.5 lbs. (2.5 kg).

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2049

Model 7251 Tri-Channel RJ45 A/B Switch with RS232 Serial Remote Control

The PathWay Model 7251 Tri-Channel RJ45 A/B Switch with RS232 Serial Remote Control allows the user the capability of sharing a single port interface device connected to the COMMON port among two other devices connected to the A and B ports for each channel. Remote Control access can be accomplished using RS232 serial commands through the DB9 port. The Model 7251 dimensions are 19" W x 1.75" H x 8" D.

Features:
- Each of three channels allows access to two networks from one COMMON network or device.
- Switches all 8 pins of the RJ45 interface.
- All three channels switch simultaneously.
- Local control via front-panel pushbutton.
- Remote control port allows off-site monitoring and switch management.
- The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
- Front-panel pushbutton control can be locked out, remotely.
- Front panel LED's display switch position and power status.
- Retains last switch position even in the event of power loss and continues to pass data.
- Rugged aluminum case provides EMI/RFI shielding.
- Custom length RJ45 cables available for your switch installation.

Specifications:

- Port Connectors: (3) RJ45 female connectors for each of three channels labeled A, B, and COMMON.
- Front Panel Control: (1) Manual pushbutton allows local switching.
- Display: (2) Front panel LED's display switch position and power status.
- Remote Control: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
- Power: UL approved 120VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
- Dimensions: Rackmount, 19.0" W x 1.75" H x 8.0" D (48.3 x 4.4 x 20.3 cm).
- Weight: Approximately 4.5 lbs. (2.0 kg).

Option: Wide Range Power Module (Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2058

Model 9448SH RJ45 Cat 5e A/B Switch, Manual, Rackmount
- All Ports are Shielded RJ45 Connectors

The Model 9448SH RJ45 A/B Switch enables access to two 10/100/1000 Base-T networks. The Model 9448SH Cat5e A/B Switch allows the user to reroute data between two networks with a simple flip of a switch. The unit supports all 8 pins of the RJ45 Cat5e interface. No need to plug and unplug cables thereby eliminating connector wear.

Features:
- Allows access to two networks from one computer or workstation.
- Certified for Cat5e compliance. Rated for 10/100/1000 Base-T networks.
- All ports are shielded RJ45 connectors.
- All 8 pins of the RJ45 interface are switched.
- Transparent to data speed and format.
- Manual operation via front-panel rotary switch.
- High quality sealed switch with self-wiping precious metal contacts.
- Eliminates the need to plug and unplug cables.
- No external power required.
- Rackmount configuration.
- Attractive anodized black box packaging provides EMI/RFI shielding.
- Lifetime guarantee.
- Custom length Cat5e cables available for your switch installation.

Specifications:
Port Connectors: (3) Shielded RJ45 female connectors labeled A, B, and COMMON.
Front Panel Controls: (1) Rotary switch on front panel selects A or B.
Power: No power required. Manually operated.
Dimensions: Rackmount 19" W x 1.75" H x 8" D. (48.3 x 4.4 x 20.3 cm)
Weight: Approximately 1.0 lbs. (0.5 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2061

Model 9455SH Dual Channel RJ45 Cat5e A/B Switch, Manual, Rackmount
- All Ports are Shielded RJ45 Connectors

The Model 9455SH is a dual-channel RJ45 A/B Switch. Both channels switch to A or B simultaneously. Each of the two channels reroutes data from its Common port to its A or B port, depending on switch position. The unit supports all 8 pins of the RJ45 Cat5e interface.

Features:
- Each channel allows quick connection to any one of two devices from one COMMON device.
- Rated for 10/100/1000 Base-T networks (Up to Cat 5e).
- All ports are shielded RJ45 connectors.
- All 8 pins of the RJ45 interface are switched.
- Transparent to data speed and format.
- Simultaneously switches both channels via front-panel rotary switch.
- High quality sealed switch with self-wiping precious metal contacts.
- Eliminates the need to plug and unplug cables.
- No external power required.
- Rackmount configuration.
- Attractive anodized black box packaging provides EMI/RFI shielding.
- Lifetime guarantee.
- Custom length Cat5e cables available for your switch application.

Specifications:
Port Connectors: (3) Shielded RJ45 female connectors labeled A, B, and COMMON, for Channel 1, and (3) RJ45 shielded connectors labeled A, B, and COMMON for Channel 2.
Front Panel Controls: (1) Rotary switch on front panel selects A or B for both channels, simultaneously.
Power: No power required. Manually operated.
Dimensions: Rackmount 19" W x 1.75" H x 8" D.
(48.3 x 4.4 x 20.3 cm)
Weight: Approximately 2.0 lbs. (0.9 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2063

Model 9080 RJ45 A/B/OFFLINE Switch, Manual, DIN Rail Mounted, Cat5e Compliant

- Convenient DIN rail mounting, Ideal for use in process control systems.

The Model 9080 RJ45 A/B/OFFLINE switch allows the user to access two RJ45 devices connected to its A and B ports with one RJ45 device connected to its COMMON port, or to isolate all ports by switching to OFFLINE position. The unit is a manually operated keylock switch, requiring no power. Port selection is quick and easy via a front panel keylock switch. The Model 9080 switch is easily integrated as a system component by utilizing its rear panel DIN rail mounting bracket.

Features:
- Allows (1) COMMON RJ45 port to be shared among either of (2) RJ45 ports A or B, or isolate all ports by switching to OFFLINE position.
- Key can be removed in the A, B, and OFFLINE positions.
- Manual operation via front panel mounted keylock switch.
- Switches all 8 leads of the RJ45 interface.
- Certified for category 5e compliance.
- Manually operated keylock switch. No power required.
- DIN rail bracket on rear panel.
- Grounding screw is mounted on the front panel.
- Custom length Cat5e RJ45 cables available.

Specifications:
Port Connectors: (3) RJ45 female connectors labeled A, B, and COMMON
Front Panel Control: (1) Keylock switch allows local switching.
Power: No power required. Manually operated.
Enclosure: Shielded Aluminum Enclosure.
Dimensions: DIN Rail Mount Package: 1.75"W x 4.25"H x 6.0"D.
(4.4 x 10.8 x 15.2 cm)
Weight: Approximately 1.5 lbs. (0.7 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2066

Model 7190 Double Gang, Wallbox, RJ45, Cat5e Online/Offline Manual Switch

The Model 7190 is a manually operated double gang wall box Online/Offline switch. When in the ONLINE position, the switch connects the COMMON Device to Device A. When in OFFLINE position, the switch disconnects the COMMON Device from Device A. There are two RJ45, Cat5e ports on the bracket inside the wall box. The RJ45 network cables must be run into the box and bracket before installing in the wall.

Features:
- Online/Offline switch on faceplate.
- Two RJ45, Cat 5e Ports on bracket inside box.
- RJ45 cables must be run into box and bracket before installing in the wall.
- Rated for 10/100/1000 Base-T networks (up to Cat5e).
- High quality sealed switch with self-wiping precious metal contacts.
- All 8 pins of the RJ45 interface are switched.
- Transparent to data speed and format.
- Manual operation via front-panel rotary switch.
- No external power required.
- Custom length RJ45 cables available for your switch installation.
- Lifetime guarantee.

Specifications:
Port Connectors: (2) RJ45 Cat5e female connectors color coded, A is blue and COMMON is black. They are located on bracket inside the wall box.
Front Panel Control: (1) rotary switch on front panel selects ONLINE or OFFLINE.
Power: No power required. Manually operated.
Dimensions: Double Gang Wall Box: 4.56"W x 4.5"H x 3.4"D. (11.6 x 11.4 x 8.6 cm)
Weight: Approximately 0.7 lb. (0.3 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2070

Model 7426 RJ45 Cat5 A/B/C/D Switch, with Telnet and GUI Remote Control

The PathWay Model 7426 RJ45 Cat5 A/B/C/D Switch with Telnet and GUI allows the user the capability of sharing a single port interface device connected to the COMMON port among four other devices connected to the A, B, C, and D ports with remote access functionality.

The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the RJ45 control port located on the rear of the unit. Remote Control access can be accomplished using an Ethernet 10/100BASE-T connection and either Telnet commands or graphical user interface. The front panel LED display indicates the switch position.

Features
- Shares one COMMON RJ45 port among four RJ45 ports, A, B, C, D
- Certified for Cat5 compliance.
- The switch ports are transparent to all data.
- Pins 1, 2, 3 and 6 of the RJ45 interface are switched.
- Front panel pushbutton control.
- Switch maintains position on power loss and continues to pass data.
- Control of the switch position from a 10/100 Base-T LAN Ethernet environment.
- Remote Control Telnet command interface or Graphical User Interface that allow the user to control switch position, lockout front panel operations and obtain switch status.
- Front panel LED's display switch position and power status.

SOFTWARE FEATURES
- Access User Interface via standard web browser.
- Easy to use, simple point and click operation.
- Remotely access to control or monitor the Model 7426 Switch System.
- Users can change the switch's IP address.
- LAN access gives users across the LAN or over the Internet access to control if user network is configured accordingly.

SPECIFICATIONS:
Port Connectors: (5) RJ45 female connectors labeled A, B, C, D, and COMMON.
Front Panel Control: (4) Manual pushbuttons allow local switching.
Display: (4) Front panel LED's display switch position and power status.
Remote: (1) RJ45 female connector on rear panel accepts 10/100 Base-T LAN access Ethernet for Remote control operation.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500 mA to the unit.
Dimensions: Rackmount configuration 19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm)
Weight: Approximately 4.5 lbs (2.0 kg)

OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115 VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2118

Model 8462 Nine-Channel DB15 Connect / Disconnect Switch, Manual Operation

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

The Model 8462 Network Switch is comprised of nine individually controlled, manually operated, DB15 Connect/Disconnect switches. When in CONNECT position, that individual channel input is completely connected to its respective channel output. When in DISCONNECT position, that individual channel input is completely disconnected from its respective channel output.

Model 8462 9-Channel Switch Features:

Allows quick "connect" or "disconnect" between input and output ports for each of the nine channels.
Independently switch each of nine channels via knobs on front panel.
High quality sealed switch with self-wiping low impedance contacts.
Eliminates the need to plug and unplug cables.
No external power required.
Transparent to data speed and format.
Manual operation via front panel rotary switches.
All 15 pins of the DB15 interface are switches.
Attractive anodized black box packaging provides EMI/RFI shielding.
Optional mounting brackets adapt unit for panel mounting. Model 2433, Cat. No. 512433.
Custom length DB15 cables available for your switch installation.
Lifetime guarantee against manufacturing defects.
Specifications:

PORT CONNECTORS:
(9) DB15 (M) Input connectors.
(9) DB15 (F) Output connectors.
FRONT PANEL CONTROLS: (9) rotary switches allow local switching.
POWER: No power required. Manually operated.
DIMENSIONS: Desktop Configuration: 16.73" W x 3.47" H x 6.0" D. (42.5 x 8.8 x 15.2 cm)
WEIGHT: Approximately 6 lbs. (2.7 Kg)

Optional Rackmount Brackets allow the Model 8462 DB15 manual network switch to be mounted in a 19" rack enclosure. The brackets are field installable. To order the 3.5" brackets, request: Cat. No. 512433, Model 2433

Custom Network Switches are available. Contact us by phone, email, or complete the Online Custom Products Form. http://www.electrostandards.com/Products-Custom/Copper-Switch/

All ESL Manual Data Network Switches are available for export.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2116

Model 8552 RJ45 A/B/C/D Switch, Manual Control, CAT 5e Compliant

Share RJ45 interface networks or devices, "quick & easy".

The Model 8552 enables access to four RJ45 10/100/1000 Base-T networks from one COMMON RJ45 device. The Model 8552 Category 5e A/B/C/D Switch allows the user to reroute data between four networks with a simple flip of a switch. No need to plug and unplug cables thereby eliminating connector wear with this 4-position manual switch. Since the data switch supports all eight pins, it is applicable to sharing ANY RJ45 device.

Features:

Allows access to four networks from one computer or workstation.
Certified for CAT5e compliance.
Eliminates the need to plug and unplug cables.
No external power required.
Transparent to data format.
Manual operation via front-panel rotary switch.
Rated for 10/100/1000 Base-T networks (up to CAT5e).
Attractive anodized black box packaging provides EMI/RFI shielding.
High quality sealed switch with self-wiping precious metal contacts.
All 8 pins of the RJ45 interface are switched.
Lifetime guarantee against manufacturing defects.
Custom length CAT5e cables are available for your switch installation.
Specifications:

PORT CONNECTORS: (5) RJ45 female connectors labeled A, B, C, D, and COMMON.
FRONT PANEL CONTROL: (1) Rotary switch on front panel selects A, B, C, D.
POWER: No power required. Manually operated.
DIMENSIONS: 5.3" W x 2.6" H x 7.3" D (13.5 x 6.6 x 18.5 cm).
Weight: Approximately 1.0 lb. (0.5 Kg).

All ESL Switches are available for export.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2117

Path Way® Remotely Controllable Network Switch
Model 7362 RJ45 10/100 Base-T A/B/C Switch, Cat 5, with Serial Remote Control

Provides CAT5 Performance

The PathWay® Model 7362 RJ45 10/100 Base-T A/B/C Switch allows the user the capability of sharing one RJ45 device connected to the COMMON port among three other devices connected to the "A", "B", and "C" ports. The switch may be controlled locally by manually operating the front panel pushbuttons or remotely from the DB9 REMOTE port located on the rear of the unit. The remote port provides control through RS232 serial commands and allows the user to both control and monitor the switch position.

Features:

Allows quick connection to any one of three RJ45 devices from one COMMON device.
Switches all 8 pins of the RJ45 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Rated for 10/100 Base-T networks (up to Cat5).
Local control via front-panel pushbuttons.
Remote control port allows off-site monitoring and switch management.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
Front-panel pushbutton control can be locked out, remotely.
Front panel LED's display switch position and power status.
Retains last switch position in the event of power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length RJ45 cables available for your switch installation.
Specifications:

PORT CONNECTORS: (4) RJ45 female connectors are labeled A, B, C, and COMMON.
FRONT PANEL CONTROLS: (3) Manual pushbuttons allow local switching.
DISPLAY: (3) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) DB9 female connector on rear panel accepts
ASCII RS232 Serial Data for Remote Control operation.
POWER: UL approved 120VAC, 60 Hz wall mount power module supplies
12 VDC, 500mA to the unit.
DIMENSIONS: Rackmount configuration 19.0" W x 1.75" H x 8.0" D.
(48.3 x 4.4 x 20.3 cm).
WEIGHT: Approximately 4.5 lbs. (2.0 Kg)

OPTION: Wide Range Power Module: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC 50/60Hz in place of standard 115 VAC or 120VAC power module. Ideal for international applications.

For custom network switches call our friendly customer support staff at 401-943-1164, email eslab@electrostandards.com, or complete our online form: http://www.electrostandards.com/Products-Custom/Copper-Switch/

All ESL products are available for export.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2120

Model 7298 Three-Channel XLR A/B Switch, with Contact Control Remote Port, 1U Rackmount

- Ideal for professional audio equipment switching.

Each channel of the PathWay® Model 7298 3-Channel XLR A/B Switch allows the user the capability of accessing two separate XLR interface devices connected to ports A and B with a single XLR interface device connected to the COMMON port.

The switch may be controlled locally via the front panel pushbutton or remotely from a DB9 port located on the rear of the unit. The Remote port accepts contact closure signals. The Model 7298 dimensions are 19" W x 1.75" H x 8" D.

Features
- Each of the three channels allows access to two XLR interface devices from one COMMON XLR device.
- All three channels switch simultaneously.
- Switches all three pins of the XLR interface.
- Eliminates the need to plug and unplug cables.
- Local control via front-panel pushbutton.
- Remote control port allows off-site switch management.
- Front-panel pushbutton control can be locked out, remotely.
- Front panel LED's display switch position and power status.
- Retains last switch position in the event of a power loss and continues to pass data.
- When power is restored, unit maintains last set position.
- Attractive anodized black box packaging provides EMI/RFI shielding.
- Custom length XLR cables available for your switch installation.

Specifications:
Port Connectors: (2) XLR female connectors labeled A and B for each of the three channels. (1) XLR male connector labeled COMMON for each of the three channels.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (2) Front panel LED's display switch position and power status.
Remote: (1) DB9 (F) connector on rear panel accepts Contact Closure transition signals for Remote Control operation.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500 mA to the unit.
Dimensions: Rackmount configuration
19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm)
Weight: Approximately 4.6 lbs. (2.1 Kg)

Option: Wide Range Power Module (Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2126

Model 7299 Eight-Channel XLR A/B/C Switch, with Contact Control Remote Port, 3U Rackmount

- Ideal for professional audio equipment switching.

Each channel of the PathWay® Model 7299 8-Channel XLR A/B/C Switch allows the user the capability of accessing three separate XLR interface devices conntected to port A, B and C with a single XLR interface device connected to the COMMON port.

The switch may be controlled locally via the front panel pushbutton or remotely from a DB9 port located on the rear of the unit. The Remote port accepts contact closure signals.

Features
- Each of eight channels allows access to three XLR interface devices from one COMMON XLR device.
- All eight channels switch simultaneously.
- Switches all three pins of the XLR interface.
- Eliminates the need to plug and unplug cables.
- Local control via front-panel pushbutton.
- Remote control port allows off-site switch management.
- Front-panel pushbutton control can be locked out, remotely.
- Front panel LED's display switch position and power status.
- Retains last switch position in the event of a power loss and continues to pass data.
- When power is restored, unit maintains last set position.
- Attractive anodized black box packaging provides EMI/RFI shielding.

Option: Wide Range Power Module (Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Specifications:
Port Connectors: (3) XLR female connectors labeled A, B, and C for each of the eight channels. (1) XLR male connector labeled COMMON for each of the eight channels.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (3) Front panel LED's display switch position and power status.
Remote: (1) DB9 (F) connector on rear panel accepts Contact Closure transition signals for Remote Control operation.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500 mA to the unit.
Dimensions: Rackmount configuration
19.0" W x 5.25" H x 10.0" D. (48.3 x 13.3 x 25.4 cm)
Weight: Approximately 8.5 lbs (3.9 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2125

Model 7211 Dual Channel DB9 A/B Switch with Remote Contact Control Port

The PathWay® Model 7211 Dual Channel DB9 A/B Switch with Remote Contact Control Port allows the user the capability of sharing a single port interface device connected to the COMMON port among two other devices connected to the A and B ports for each of its two channels.

The switch may be controlled locally via the front-panel pushbuttons or remotely from a DB9/F port located on the rear of the unit using contact closure. Switch position states may be attained locally via the front panel LED display or remotely through voltage output on the remote port.

Features:
Supports (2) independent channels of A/B switch function.
Switches all 9 pins of the DB9 interface.
Transparent to data speed and format.
Front panel LED's display the current position and power status for each channel.
Simultaneous switching of both channels or individual control of each channel.
Local control via front-panel pushbutton.
Remote control port accepts contact closure signals for off-site monitoring and switch management.
A single DB9 female Remote port accepts a straight through DB9 male/male cable to connect to the Model 7211 Remote unit.
Monitor pins supply the voltage to drive LED indicators at remote location with 5VDC.
All switched signals are passed via latching copper contact relays that maintain their position and continuity even the event of a power loss of failure.
Upon power restore, the unit switches based on remote contact closure state for each channel.

Model 7211-RU Remote Unit, Rackmount
The Model 7211-RU Remote Unit is designed to control the PathWay Model 7211 Dual Channel DB9 A/B Switch by providing the required contact closure control signals.

Features:
Two toggle switches control the two DB9 interface A/B switch channels of the Model 7211.
LED indicators display the current position of each switch channel.
A transition from contact CLOSE (down) to OPEN (up) of the toggle switch will cause the channel to switch to "A". A transition from contact OPEN (up) to CLOSE (down) of the toggle switch will cause the channel to switch to B.
Upon power up, the Model 7211 reads the static contact state. If OPEN, switch to position A; if CLOSED, switch to position B. After power up, the unit looks for transitions.
A single DB9 female Remote port accepts a straight through DB9 cable.
Dimensions: 19"W x 1.75" H x 8"D.

PathWay® Model 7211 Dual Channel DB9 A/B Switch with Remote Control Port

The PathWay® Model 7211 Dual Channel DB9 A/B Switch allows a device connected to either channel Common port access to its respective A or B port. The Model 7211 Dual Channel Switch is compactly enclosed in a low profile, 19-inch 1U rack unit. The unit also allows for both ports to be switched simultaneously.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1863

Model 7300 Single Channel RS232 / RS530 A/B Switch with Fallback & Remote

Control Port Automatic Switch to Backup via Data Activity and Data Carrier Monitor! Switch Position and Switch Mode Can Be Remotely Controlled

The PathWay® Model 7300 Single Channel RS232 / RS530 A/B Network Switch with Fallback and Remote Control Port allows the user the capability of sharing a single port interface device connected to the Common port among two other devices connected to the A and B ports with remote access functionality. The remote port can be used to attain switch position status by using the provided set of contact closure pins. The remote port can also be used to control the switch position and mode using a separate set of contact closure pins.

When in automatic fallback mode the unit monitors either RD activity or DCD presence on port A only. If activity or presence of the selected trigger signal (RD or DCD) is detected on Port A, the unit switches to the A Position and stays in this position while there is still activity or presence detected. If activity or presence of the selected trigger signal (RD or DCD) is detected on Port A, the unit switches to the B Position and stays in this position until activity or presence is detected on Port A. The user can override automatic fallback operation from the front panel or remote port and force the unit to operate as an A/B switch.

Features:

Switch to backup automatically via Data Activity or DCD trigger monitor. Switches back when signals restore.
The switch ports are transparent to all data.
All pins of the DB25 interface are switched.
All switched signals are passed via copper contact relays that maintain their position and continuity even in event of power loss or failure.
When power is restored, the unit loads previous position and mode of operation and checks DIP switch settings and remote port to determine the correct startup configuration.
Automatic switching based on either RD activity or DCD presence.
Automatic switching compatible with RS232 or RS530 protocols.
Remote control of the switch position and mode from a contact closure REMOTE port.
Reading of the current switch position from a contact closure remote port. Front panel LED's display position, mode and power status.

Approvals:

Certified compliant with EMC Regulations: EN 55022:2006/A1:2007 Class A ITE Emissions Requirements (EU). ICES-003 Issue 4 Class A Digital Apparatus Emissions Requirements (Canada). FCC 47 CFR Part 15 Class A Emissions Requirements (USA).
Certified compliant with Safety Regulation: EN 60950-1 including deviations to UL/CSA 60950-1 2nd edition.

OPTION: WIDE RANGE POWER MODULE:(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. For more about this product, see Accessories tab.
Specifications:

CONNECTORS: (3) DB25 (F) connectors on rear labeled A, B and COMMON.
FRONT PANEL CONTROLS: Manual pushbutton allows alternate action A/B switching when in manual mode.
REMOTE CONTROL: (1) DB15 (F) connector on rear panel accepts contact closure signals from Model 4077, Cat No. 514077 or similar device. See Related Products tab for more about Model 4077.
FRONT PANEL DISPLAY: (2) LEDs labeled A and B display switchposition and power status.
POWER: UL Approved, 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
DIMENSIONS: Rackmount, 19.0" W x 1.75"H x 8.0"D. (48.3 x 4.4 x 20.3cm) WEIGHT: Approx. 4.9 lbs. (2.2 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2143

Model 7346 Single Channel RJ45 Cat5e A/B Switch with Remote Control via Contact Closure

Provides Cat5e Performance

The PathWay® Model 7346 Single Channel RJ45 Cat 5e A/B Switch with Contact Closure Remote allows the user the capability of accessing two separate devices, ports A and B, via connection through a device connected to the Common port.

The switch may be controlled manually via the front panel pushbutton or remotely from a DB9 port located on the rear of the unit. Switch position state may be attained via the front panel LED display.

FEATURES:

Allows quick connection to any one of two devices from one COMMON device.
Switches all (8) pins of the RJ45 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Certified for Cat5e compliance.
Local control via front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
The remote control port accepts dry contact closure commands for switch position control and front panel lockout.
Front panel LED's display switch position and power status.
Ideal for fallback applications.
Retains last switch position in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.

SPECIFICATIONS:
PORT CONNECTORS: (3) RJ45(F) shielded connectors labeled A, B, and COMMON.
COMPLIANCE: Interface meets or exceeds Category 5e performance.
FRONT PANEL CONTROL: (1) Pushbutton to select port A or B.
DISPLAY: (2) Red LEDs display switch position and power status.
SUPERVISORY REMOTE: (1) DB9/female on rear panel accepts Dry Contact Closure for Remote Control operation.
POWER: UL approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
DIMENSIONS: Rackmount Configuration, 19.0" W x 1.75" H x 8.0" D (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.0 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2208

Model 7366 Tri-Channel RJ45 Cat 5e A/B Switch, with RS232 Remote

The PathWay® Model 7366 Tri-Channel RJ45 Cat5e A/B Switch with RS232 Remote allows the user the capability of sharing a single RJ45 interface device connected to the Common port among two other devices connected to the A and B ports, for each channel.

The switch may be controlled manually via front panel pushbuttons or remotely from an RS232 serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS232 seral port located on the rear of the unit.

FEATURES:

Each channel allows access to two RJ45 Cat5e networks from one COMMON network or device.
Switches all (8) pins of the RJ45 interface.
(3) Independent switch channels in a slim package!
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Certified for Cat5e compliance.
Local control via front-panel pushbuttons.
Remote control port allows off-site monitoring and switch management.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
Front-panel pushbutton control can be locked out, remotely.
Front-panel LED's display switch position and power status.
Ideal for fallback applications.
Retains last switch position in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length Cat5e cables available for your switch installation.

SPECIFICATIONS:

PORT CONNECTORS: (9) RJ45(F) connectors total (A, B, and COMMON for each of three channels).
FRONT PANEL CONTROLS: (3) Pushbuttons labeled Channel 1 through Channel 3.
DISPLAY: (6) Red LED's total indicate the A or B switch positions for each of the three channels.
SUPERVISORY REMOTE PORT: (1) DB9(F) connector accepts RS232 serial data.
POWER: ULapproved wall mount 120VAC, 60Hz power module supplies 12 VDC, 500 mA to the unit.
DIMENSIONS: Rackmount configuration 19"W x 1.75" H x 8" D (48.3 x 4.4 x 20.3 cm).
WEIGHT: Approximately 4.5 lbs. (2.0 kg)

OPTION: Wide Range Power Module: (Cat. No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

USB to DB9 Serial Converter Cable Available!
If only USB ports are available on the computer or if a USB port is chosen to be used for any reason, a USB to DB9 serial converter cable will be needed. This cable can be provided by ESL under part number 514372.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2209

PathWay Model 7365 Dual Channel RJ45/RJ48 T1 Interface A/B Switch, with Contact Closure Control, Telnet and GUI

The PathWay Model 7365 Dual Channel RJ45/RJ48 T1 Interface A/B Switch with Contact Closure, Telnet and GUI allows the user the capability of sharing a single port interface device connected to the COMMON port among two other devices connected to the A and B ports, for each channel, with remote access functionality.

Remote Control access can be accomplished using an Ethernet 10/100BASE-T connection and either Telnet commands or graphical user interface. The unit can also be controlled via dry contact closure logic through the rear panel DB9 Remote Port.

FEATURES

Each channel allows access to two RJ45/RJ48 T1 networks from one COMMON network or device.
The switch ports are transparent to all data.
All (8) pins of the RJ45/RJ48 interface are switched.
Simultaneous control of both channels.
Front panel pushbutton control.
Switch maintains position on power loss and continues to pass data.
Upon power up, unit switches based on state of contact closure.
Control of the switch position from a 10/100-Base-T LAN Ethernet environment.
Remote Control Telnet command interface or Graphical User Interface that allow the user to control switch position, lockout front panel operations and obtain switch status.
Remote Contact Closure control provides dry contact logic to allow the control of the switch position and lockout state of front panel operations.
Front panel LED's display current position and power status.

SOFTWARE FEATURES

Access User Interface via standard web browser.
Easy to use, simple point and click operation.
Remotely access to control or monitor the Model 7365.
Users can change the switch's IP address.
LAN access gives users across the LAN or over the Internet access to control if user network is configured accordingly.

SPECIFICATIONS:

PORT CONNECTORS: (3) RJ45 female connectors labeled A, B, and COMMON for each of two channels.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE CONTROLS: (1) DB9 (F) connector on rear panel accepts Contact Closure transition signals for Remote Control Operation.
(1) RJ45 (F) connector on rear panel accepts 10/100Base-T LAN Ethernet that uses both TELNET commands and a GUI Interface for Remote Control operation.
POWER: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500 mA to the unit.
DIMENSIONS: Rackmount configuration 19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.0 kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2210

Model 4078 Dual Channel Remote Control Unit for RSS-3 IOC-3-R Devices

- Controls two separate Redundancy Switching System (RSS) devices.

The PathWay Model 4078 Dual Channel Remote Control Unit for RSS-3 IOC-3-R devices. The Model 4078 dimensions are 19" W x 1.75" H x 8" D. It weighs approximately 3.5 lbs.

The connected devices may be controlled manually via the front panel toggle switches. The position of the connected RSS-3 IOC-3-R devices may be attained via the front panel LED's.

FEATURES:

Control and monitoring of two separate RSS-3 IOC-3-R switch devices.
Front panel toggle switch control allows A/B switching command of connected devices.
Front panel LED's display current position of connected devices and power status.
Toggle switches can change position of their respective RSS-3 IOC-3-R device even when the Model 4078 is not powered.
Slim packaging, occupies only 1U (1.75") panel of height of standard 19" wide rack space.
Rugged aluminum case provides EMI/RFI shielding.

SPECIFICATIONS:

PORT CONNECTORS: (2) 4-Pole Screw Terminal Strips having contacts to be wired to the RSS-3 IOC-3-R device.
FRONT PANEL CONTROLS: (2) Momentary toggle switches allow local control of connected devices.
DISPLAY: (2) Front panel LED's for each channel display switch position and power status.
POWER: UL approved 120VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
DIMENSIONS: Rackmount 19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm), (1U rack height).
WEIGHT: Approximately 3.5 lbs. (1.6 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2227

Model 8448 Quad-Channel RJ45/BNC A/B Switch, Manual Operation

Each channel of the Model 8448 Quad-Channel A/B Switch allows a device connected to the COMMON port to access devices connected to the A or B ports. Channel 1 utilizes RJ45 connectors and is certified for Cat 5e Compliance. Channels 2, 3, and 4 utilize BNC coaxial connectors. All four channels switch simultaneously.

FEATURES:
- Each channel allows quick connection to any one of two devices from one COMMON device.
- Simultaneously switches all four channels via front-panel rotary switch.
- The RJ45 channel is rated for 10/100/1000 Base-T networks. (Up to Cat 5e)
- All 8 pins of the RJ45 interface are switched.
- Channels 2, 3, and 4 switch both the shield and center conductor of the coaxial interfaces.
- High quality sealed switch with self-wiping low impedance contacts.
- Transparent to data speed and format.
- Eliminates the need to plug and unplug cables.
- No external power supply required.
- Improves computer network efficiency by allowing sharing of peripherals.
- Attractive anodized black box packaging provides EMI/RFI shielding.
- Custom length RJ45 or BNC Coax cables for your switch installation.
- Lifetime guarantee against manufacturing defects.

SPECIFICATIONS:
Channel 1 Port Connectors: (3) RJ45 female connectors labeled A, B, and COMMON.
Channels 2, 3, and 4 Port Connectors: Each of three channels has (3) BNC female connectors labeled A, B, and COMMON.
Front Panel Control: (1) Rotary Switch on front panel selects A or B.
Power: No power required.
Dimensions: Desktop 8.0"W x 7.25"D x 2.25"H. (20.3 x 18.4 x 5.7 cm)
Weight: Approximately 2.5 lbs. (1.1 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2236

Model 9082 RJ45 A/B Switch, Manual, DIN Rail Mounted, Cat5e Compliant, w/Monitor Port

Convenient DIN rail mounting, ideal for use in process control systems.

The Model 9082 RJ45 A/B switch allows the user to access tow RJ45 devices connected to its A and B ports with one RJ45 device connected to its Common port. The unit is a manually operated switch, requiring no power. Port selection is quick and easy via a front panel rotary selector switch. The Model 9082 switch is easily integrated as a system component by utilizing its rear panel DIN rail mounting bracket.

FEATURES:

Allows (1) Common RJ45 port to be shared among either of (2) RJ45 ports A and B.
Manual operation via front panel mounted rotary switch.
Switches all 8 leads of the RJ45 interface.
Certified for category 5e compliance.
DIN-Rail bracket on rear panel.
Grounding screw is mounted on the front panel.
Monitor switch position via three contacts of the mini barrier strip MONITOR port located on the rear panel.

SPECIFICATIONS:

PORT CONNECTORS: (3) RJ45 female connectors labeled A, B, and Common.
FRONT PANEL CONTROL: (1) Rotary selector switch allows local switching.
MONITOR PORT: (1) Barrier strip allows monitoring of switch position.
POWER: No power required. Manually operated.
ENCLOSURE: Shielded Aluminum Enclosure.
DIMENSIONS: DIN Rail Mount Package: 1.75"W x 4.25"H x 6.0"D. (4.4 x 10.8 x 15.2 cm)
WEIGHT: Approximately 1.5 lbs. (0.7 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2244

Model 9449 Tri-Channel DB9 RS422 A/B Switch, Manual, Simultaneous Switching, Rackmount

With each of its three channels, the Model 9449 DB9 RS422 A/B Switch allows the user to access two DB9 devices connected to its A and B ports with one DB9 device connected to its Common port. The three channels are switched simultaneously via a knob located on the front panel. See the application diagram below.

Features:

Each of three channels allows quick connection to any one of two devices from one COMMON device.
Simultaneously switches all three channels via front-panel rotary switch.
High quality sealed switch with self-wiping low impedance contacts.
All 9 pins of the DB9 interface are switched.
Ideal for RS422 applications that have a DB9 connector interface.
Transparent to data speed and format.
Improves computer network efficiency by allowing sharing of peripherals.
Eliminates the need to plug and unplug cables.
Attractive anodized black box packaging provides EMI/RFI shielding.
Rackmount configuration is standard, height 1U (1.75")
Lifetime guarantee against manufacturing defects.

Specifications:
PORT CONNECTORS: (3) DB9 female connectors labeled A, B, and COMMON, for each of the 3 channels.
FRONT PANEL CONTROL: (1) Rotary switch on front panel selects A or B for all 3 channels.
POWER: No power required. Manually operated.
DIMENSIONS: Rackmount configuration, 19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 2.0 lbs. (0.9 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2245

High Speed Fiber-to-USB Converter/Extender, Host & 4-Port Hub

Simultaneously connect up to four USB Interface Devices to your desktop PC or notebook.
High speed connection to distant USB devices over multimode fiber optic cable.

The Desktop Units, Models 5162 and 5169, or the DIN Rail Mounted units, Models 5162-DIN and 5169-DIN, comprise, a Host and a Four Port USB Wired Hub that extend USB connections up to 500 meters via a high speed Fiber interface.

FEATURES:

Convert USB 2.0 compliant data from a standard PC Host interface, Model 5162, over fiber to a remote 4-port powered Hub, Model 5169.
Ideal for applications involving PC communication that require high speed, secure communication, and optical isolation.
Extend USB communication in environments that are subject to high EM or RF interference that might corrupt communication over a copper interface.
Typical applications include industrial control, KVM extension, remote desktop USB connections, and remote USB device sharing such as printers, scanners and storage devices.
Units offer true plug and play operability with support for Windows®, Mac OS®, Linux®, and support all USB device types: Control, Interrupt, Bulk and Isochronous up to 480 Mbps.
Designed to operate from -0 degree C to +50 degree C (component ratings meet or exceed 0° C to 70° C).
Units feature ESD protection circuitry on all copper USB I/O interfaces.
Power inputs are protected from transients and the 4-port Hub provides the USB standard of 500mA per port.
LEDs display Power, Fiber Link Active, Host Active (Model 5162, 5162-DIN) and Port Active (Model 5169, 5169-DIN) indicator LEDs.

Two configurations are available for each model:

Model 5162 Host Desktop Unit, for applications requiring an enclosure. (w/external power supply)
Model 5162-DIN Host Unit for applications requiring mounting on a DIN rail. (w/external power supply)
Model 5169 4-Port Hub Desktop Unit, for applications requiring an enclosure. (w/external power supply)
Model 5169-DIN 4-Port Hub Unit for applications requiring mounting on a DIN rail. (w/external power supply)

Additional Info: http://www.electrostandards.com/Search/?keyword=5162-DIN

Model 7007 RJ45 A/B Switch Module with Contact Closure Remote Port

Each Model 7007 RJ45 A/B Switch Module allows a device connected to its Common port to quickly and easily access devices connected to its A and B ports. Up to seven of these switch modules slide into the Model 9043 Module Rack Power & Control enclosure.

The Switch Modules can be controlled locally by pushbutton or remotely by contact closure. A contact control remote port facilitates remote switching.

The Model 9043 Module Rack w/Power enclosure includes a Power/Control Module and a Power/Control Bus Cable. The Power/Control Module accepts customer supplied POWER and customer supplied REMOTE signaling. The Power/Control Bus Cable interconnects all to the switch modules in that rack. When the proper contacts are made on the Remote port, all modules will switch to the prescribed port, either A or B.

Module Features

Each module allows quick connection to any one of two devices from one COMMON device.
Switches all 8 pins of the RJ45 interface.
Individual switch control via front-panel pushbuttons.
If switched remotely, all modules switch simultaneously.
Transparent to data speed and format.
The remote control port accepts contact closure commands for switch position control.
Front panel LED's display switch position and power status for each switch module.
Retains last switch position in the event of power loss and continues to pass data.
Rugged aluminum case provides EMI/RFI shielding.
Custom length RJ45 cables available for your switch installation.

System Expands to meet your needs!This modular approach to switch system requirements allows expansion to more channels on an as-needed basis. Filler panels are available to attractively cover unused module slots (See Cat No 305983 for 2-inch filler panel)

SPECIFICATIONS: Each Model 7007 Switch Module
Port Connectors: (3) RJ45 female connectors labeled A, B, and COM.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (2) Front panel LED's display switch position and power status.
Remote/Power: (1) 4-Pin female Phoenix connector accepts 48VDC from the Power/Control module that is part of the Model 9043 rack unit.
The connector also accepts remote control signals from the Power/Control module that is part of the Model 9043 rack unit.
Dimensions: Module 2.0" W x 5.0" H x 7.0" D.(5.1 x 12.7 x 17.8 cm).
Weight: Approximately 0.6 lbs. (0.3 Kg)

SPECIFICATIONS: Model 9043 Rack w/Power
Power: (1) 2-Pin External Power Supply INPUT connector requires 48VDC be supplied to this module for distribution to the switch modules in rack.
Remote: (1) DB9 female INPUT connector on rear panel accepts contact closure switch commands for Remote Control Operation of all modules in the rack.
Control: (1) 4-Pin Phoenix connector. This port provides power and control to all modules via the Power/Control Bus Cable.
Rack w/Power Module Dimensions: 19.0" W x 5.25" H x 7.0" D. (48.3 x 13.3 x 17.8 cm).
Rack w/Power Module Weight:
Approximately 5.5 lbs. (2.5 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2254

PathWay Model 7329 8-to-1 RJ45 Cat6 Switch with RS232 Serial Remote

Outstanding Cat6 RJ45 Interface Switching Capability in Only 1U Height!

The PathWay Model 7329 Single Channel RJ45 Cat6 8-to-1 Switch with RS232 Remote allows the user the capability of sharing a single port interface device connected to the COMMON port among eight other devices connected to the A, B, C, D, E, F, G, and H ports, with remote access functionality. Remote Control access can be accomplished using ASCII RS232 commands. The Model 7329 dimensions are 19"W x 1.75"H x 8"D.

FEATURES:

Allows quick connection to any one of 8 RJ45 interface devices from one COMMON device.
Switches all eight pins of the RJ45 interface
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Certified for Cat6 compliance.
Local control via front-panel pushbuttons.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
Front panel LED's display switch position and power status.
Front panel pushbuttons control can be locked out, remotely.
Retains last switch position in the event of power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length RJ45 Cat6 cables available for your switch installation.

SPECIFICATIONS:
Port Connectors: (9) RJ45 female shielded connectors labeled A, B, C, D, E, F, G, H, and COMMON.
Compliance: Interface meets or exceeds Cat 6 performance.
Front Panel Control: (8) Manual pushbuttons allow local switching.
Display: (8) Front panel LED's display switch position and power status.
Remote Control: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
Power: UL approved 100VAC/240VAC, 50Hz/60Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: Rackmount, 19.0"W x 1.75"H x 8.0"D. (48.2 x 4.4 x 20.3 cm)
Weight: Approximately 5.5 lbs. (2.5 kg).

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2256

Model 8449 5-Channel RJ45 & BNCA/B Switch, Manual Operation with Barrier Terminal Block Position/Status Port

Each channel of the Model 8449 Five-Channel A/B network switch allows a device connected to the COMMON port to access devices connected to the A or B ports. Channels 1 and 2 utilize RJ45 connectors and are certified for Cat5e compliance. Channels 3, 4, and 5 utilize BNC coaxial connectors. All five channels switch simultaneously. A four position Barrier Terminal Block port provides switch position status via two contacts for A position and two contacts for B position.

Features:

Each channel allows quick connection to any one of two devices from one COMMON device.
Simultaneously switches all five channels via front-panel rotary switch.
The two RJ45 channels are rated for 10/100/1000 Base-T networks. (Up to Cat 5e)
All 8 pins of the RJ45 interface are switched.
The three BNC channels switch both the shield and center conductor of the coaxial interfaces.
High quality sealed switch with self-wiping low impedance contacts.
Transparent to data speed and format.
Eliminates the need to plug and unplug cables.
No external power supply required.
Four position barrier terminal block port provides switch position/status via two contacts for A position, and two contacts for B position.
Four threaded screw holes located on the bottom panel facilitate mounting to a flat surface.
Improves computer network efficiency by allowing sharing of peripherals.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length RJ45 or BNC Coax cables for your switch installation.
Lifetime guarantee against manufacturing defects.

Specifications:

Channels 1, and 2 Port Connectors: Each of two channels has (3) RJ45 female connectors labeled A, B, and COMMON.Channels 3, 4, and 5
Port Connectors: Each of three channels has (3) BNC female connectors labeled A, B, and COMMON.
Barrier Terminal Block Port: (1) Four position barrier terminal block port on rear panel allows remote monitoring of the switch position.
Front Panel Control: (1) Rotary Switch on front panel selects A or B.
Power: No power required.
Dimensions: Desktop 8.0"W x 7.25"D x 2.85"H. (20.3 x 18.4 x 7.2 cm)
Weight: Approximately 2.5 lbs. (1.1 kg)

Custom Network Switches are available. Contact us by phone, email, or complete the Online Custom Products Form. http://www.electrostandards.com/Products-Custom/Copper-Switch/

All ESL Manual Data Network Switches are available for export.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2263

Model 7296 Dual MDR/MXR A/B Switch with RS232 Serial Remote

Switches multiple MDR and MXR ports, simultaneously

The PathWay® Model 7296 Dual MDR/MXR A/B Switch with USB Serial Remote allows the user the capability of sharing 2 single port MDR interface devices and 2 single port MXR interface devices connected to the COMMON port among two other devices connected to the A and B ports, with remote access functionality. Remote Control access can be accomplished using ASCII serial commands. The Model 7296 dimensions are 19"W x 1.75"H x 8"D.

FEATURES:

Each MDR channel allows access to two MDR devices from one COMMON device.
Each MXR channel allows access to two MXR devices from one COMMON device.
Switches all 6 pins of the MXR interface.
Switches 1-20 of the MDR interface.
All 4 channels switch simultaneously.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Local control via front-panel pushbutton.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
Front-panel pushbutton control can be locked out, remotely.
Front panel LED's display switch position and power status.
Retains last switch position in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length cables available for your switch installation.

SPECIFICATIONS:

PORT CONNECTORS:
(6) MDR 26-pin, Receptacle labeled A, B, and COMMON.
(6) MXR 6-pin, Receptacle labeled A, B, and COMMON.

FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE: (1) USB Type-A female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
POWER: UL Approved 100VAC/240VAC, 50Hz/60 Hz wall mount power module supplies 12VDC, 500mA to the unit. Has 2-prong, US, non-polarized plug.
DIMENSIONS: Rackmount, 19.0" W x 1.75" H x 8.0" D.(48.2 x 4.4 x 20.3 cm).
WEIGHT: Approximately 5.0 lbs. (2.3 kg).

Option: Wide Range Power Module Available:(Cat No 517277) CE, RoHS, and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard power module. Has IEC 600320 C14 inlet. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2261

Model 7336 10-Channel (9) DB9 & (1) RJ45 A/B Switch with Contact Closure Remote

The PathWay® Model 7336 10-Channel (9) DB9 and (1) RJ45 Cat5e A/B Switch with Contact Closure Remote allows the user the capability of accessing two separate devices, ports A and B, via connection through a device connected to the Common port, for each channel.The Model 7336 features 9 channels of DB9 interface switching and a single channel of RJ45 Cat5e interface switching. The Model 7336 dimensions are 19" W x 3.5" H x 8" D.The switch may be controlled manually via the front panel pushbutton or remotely from a DB9 port located on the rear of the unit. Switch position state may be attained via the front panel LED or by a set of dry contacts on the remote DB9 port.

Features:

Each of nine DB9 channels allows access to two DB9 networks or devices from one COMMON network or device.
One RJ45 channel allows access to two RJ45 networks from one COMMON network or device.All ten channels switch simultaneously.
All (9) pins of the DB9 interface are switched, Channels 1-9.
All (8) pins of the RJ45 interface are switched, Channel 10.
Transparent to data speed and format.
The RJ45 Channel 10 is certified for Cat5e compliance.
Local control via front-panel pushbutton.
The remote control port accepts dry contact closure commands for switch position control and front panel lockout.
It also supplies contact closure signals indicating switch state.
The unit maintains last set position on power loss and continues to pass data.
Upon power up, unit maintains current position.
Remote control only operates when enabled by the front panel pushbutton.Front panel LED's display current position, mode, and power status.
Attractive anodized black box packaging provides EMI/RFI shielding.

Specifications:Port Connectors:
For each of Channel 1-9: (3) DB9 female connectors labeled A, B, and COMMON.For Channel 10: (3) RJ45 female connectors labeled A, B, and COMMON.
Front Panel Control: (1) Manual pushbutton allows local switching.
Remote Control Port: (1) DB9(F) REMOTE connector accepts contact closure signals from a remote device.
Display: (2) Front panel Red LED's display switch position and power status.
(1) Front panel Green LED displays Remote Mode enabled.
Power: UL approved 100VAC/240VAC, 50Hz/60Hz wall mount power module supplies 12 VDC, 500mA to the unit. Has 2-prong, US, non-polarized plug.
Dimensions: Rackmount 19.0" W x 3.5" H x 8.0" D. Weight: Approximately 6.5 lbs. (2.9 kg).
Option: Wide Range Power Module Available:(Cat No 517277) CE, RoHS, and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard power module. Has IEC 600320 C14 inlet. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2264

Model 7239 16-channel RJ45 CAT5 A/B Switch with Remote Access

Gang switch sixteen channels to an alternate path simultaneously
Ideal for television channel distribution

The Pathway Model 7239 16-channel RJ45 CAT5 A/B switch with remote access allows accessing, on each channel, one of two separate devices via a device connected to the channel's Common port. The Model 7239 is enclosed in a 2U, full rack size, black, anodized chassis designed to provide EMI/RFI shielding.

The switch may be controlled manually by a front-panel push-button or remotely from an RS232, RS422/485 serial port located on the rear of the unit. Switch position status may be attained via the front-panel LED display or the remote RS232, RS422/485 serial port (DB9) located on the rear of the unit.

SPECIFICATIONS:

PORT CONNECTORS: (48) RJ45 female connectors. Sixteen labeled 1 - 16 in each of the groups A, B, and COMMON. REMOTE CONTROL: (1) DB9(F) connector accepts RS232, RS422/485 serial data. LED's: (2) labeled A and B, indicate switch position and power status. FRONT PANEL CONTROL: (1) Pushbutton for local switch control. POWER: Requires customer supplied 24 VDC, 500 mA Power Input. A mating power connector is included with the Model 7239. DIMENSIONS: 19.0" W x 3.5" H x 14.0" D. (48.3 x 8.9 x 35.6 cm)WEIGHT: Approximately 9.0 lbs. (4.0 Kg)

Features

Each channel allows access to two RJ45 Cat5 networks from one COMMON network or device.
Switches all (8) pins of the RJ45 interface. All 16 channels switch simultaneously.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Certified for Cat5 compliance.
Local control via front-panel pushbutton.
Front-panel pushbutton control can be locked out, remotely.
The REMOTE port accepts RS232, RS422/485 Serial Data ASCII commands that allow the user to control switch position, lockout front panel operations and obtain switch status.
Front panel LED's display switch position and power status.
Retains last switch position in the event of power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Rackmount configuration is standard.
Requires customer supplied 24 VDC, 500 mA power input.
Municipalities, schools, government: The Model 7239 is on the GSA Schedule!
Custom length RJ45 Cat5 cables available for your installation.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1778

Model 9746 High Density A/B Switch System, Manual Control, with Monitor Ports

The Model 9746 Serices of High Density A/B Switch Systems is comprised of five models:

No. of Channels	Catalog No.	Model No.	Description
8	526812	9746/8	8-Channel RJ45 A/B Switch, with Monitor Ports
16	526813	9746/16	16-Channel RJ45 A/B Switch, with Monitor Ports
24	526814	9746/24	24-Channel RJ45 A/B Switch, with Monitor Ports
32	526815	9746/32	32-Channel RJ45 A/B Switch, with Monitor Ports
40	309746	9746	40-Channel RJ45 A/B Switch, with Monitor Ports

The rack can accommodate up to 40 channels in only 8.75" of panel height.

Manually control all channels separately via knobs located on the front panel, one knob per channel.
Each switch channel has a monitor port located on the top panel, one monitor port per channel. Monitor port wires are soldered to the rotary switches at the same points as the common port wires.
Internal wiring T586B utilizes CAT5e rated material and CAT5e rated connectors, however, the switches have not been tested for an overall Category rating.
Switches all 8 pins of the RJ45 interface.
Manually operated. No power required.
Rackmount Chassis: 19" W x 8.75" H x 13" D (48.3 x 22.2 x 33.0 cm)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2392

Model 9247 DB9 A/B Switch Module (MMM), Rackmount Configuration

The Model 9247 allows the user to access two DB9 devices connected to the A and B ports from one DB9 device connected to the COMMON port. Switching between devices A and B is quick and easy via the front panel rotary selector.

Features:

All 9 pins of the DB9 interface are switched
Manual operation via front-panel rotary knob
High-quality sealed switch with self-wiping low impedance contacts
Transparent to data speed and format
No external power supply required
Attractive anodized aluminum packaging provides EMI/RFI shielding
Slides into Model 9025 Module Rack or attaches to suface-mounted Vertical Mounting Plate (Cat. No. 500417).
Lifetime guarantee against manufacturing defects
Municipalities, schools, and government agencies: The Model 9247 is on GSA Schedule GS-35F-0286V.

Model 9025 Rackmount Chassis for Switch Modules (Cat. No. 305972)

Rack can accommodate up to eight Model 9247 A/B modules (2.0" W)
Rackmount chassis supports multiple switch module chassis of various widths
Rack size 19" W x 5.25" H x 7" D (48.3 x 13.3 x 17.8 cm)
Full opening for modules is 16.8" W (42.7 cm)

Model 9417 Vertical Mounting Plate for Switch Modules (Cat. No. 500417)

Dimensions 5.0" H x 5.5" W (12.5 x 13.8 cm)
1/6" aluminum with four Pem fasteners, aligned for easy mounting of any 5.0" H module

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=139

Model 9445 Five-Channel DB9 A/B Switch, Manual, Independent Switching, Rackmount

With each of its five channels, the Model 9445 DB9 A/B switch allows the user to access two DB9 interface devices connected to its A and B ports with one DB9 interface device connected to its COMMON port. The five channels are switched via the five knobs located on the front panel.

FEATURES
Independently switches each of the five channels via five front-panel rotary switches.
High-quality sealed switch with self-wiping low impedance contacts.
All 9 pins of the DB9 interface are switched.
Ideal for RS232, RS422, RS485 or any application that has a DB9 connector interface.
Transparent to data speed and format.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2287

Model 4720 Remotely Controllable DB25 A/B Switch, Monitor A & B for Control, Custom Protocol

The Model 4720 remotely controllable DB25 A/B switch monitors the data on its A and B ports and responds to custom protocol ASCII character "Switch to A" or "Switch to B" command sequences. Local control is also available via front-panel control.

FEATURES:

Allows quick connection to any one of two DB25 interface devices from one COMMON device.
Switches pins 1-8 and 20 of the DB25 interface.
Local control via front-panel pushbutton.
Data on both ports A nd B monitored for ASCII character command sequences.
ASCII commands are identified, stripped from data stream, and not allowed to pass through the A/B switch unit.
Each received command is responded to for positive receipt of command acknowledgement.
Custom command protocol designed to enable the A/B Switch Unit to respond per command, acknowledge receipt of command and provide status information per command request.
RS232 multi-drop configuration for monitored data on ports A and B.
Each switch has a programmable dip switch to create its unique address/identity.
Commands include Change Switch Position, Query Switch Position Status, and Lockout/Unlock front panel control.
Front panel LED's display switch position and power status.
Retains last switch position in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2293

Model 8067 2-Terminal Barrier Strip A/B/C/D Switch, Manual, Desktop

SPECIFICATIONS:

PORT CONNECTORS: (5) Two-Terminal Barrier Strips labeled A, B, C, D and COMMON.
FRONT PANEL CONTROL: (1) Rotary switch on front panel selects A, B, C, or D.
POWER: No power required. Manually operated.
ENCLOSURE: Shielded Aluminum Enclosure.
DIMENSIONS: 5.25" W x 2.0" H x 7.25" D. (13.3 x 5.1 x 18.4 cm)
WEIGHT: Approximately 1.2 lbs (0.5 Kg)

FEATURES:

Allows quick connection to any one of four 2-Terminal Barrier Strip interface devices from one COMMON device.Manual operation via front-panel rotary switch. Both pins of the 2-Terminal Barrier Strip are switched. High quality sealed switch with self-wiping low impedance contacts. Eliminates the need to connect and disconnect cables.No external power required. Attractive anodized black box packaging provides EMI/RFI shielding. Lifetime guarantee against manufacturing defects. Custom length spade lug cables available for your switch installation.

The Model 8067 allows the user to access four devices connected to the A, B, C, and D, 2-Terminal Barrier Strip ports from one device connected to the COMMON 2-Terminal Barrier Strip port. Switching connection between devices is quickly and easily accomplished via the front panel rotary selector - No need to plug and unplug cables. The Model 8067 is packaged in slim desktop style enclosure.

Custom Network Switches are available. Contact us by phone, email, or complete the Online Custom Products Form. http://www.electrostandards.com/Products-Custom/Copper-Switch/

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2360

Model 7369 Dual Channel DB9 A/B Switch with RS232, Telnet and GUI

The Pathway Model 7369 Dual Channel DB9 A/B Switch with RS232, Telnet and GUI allows the user to share a single port interface device connected to the A and B ports for each channel. Remote Control access can be accomplished using an Ethernet 10/100BASE-T connection and either Telnet commands or grapnical user interface. The unit can also be controlled via RS232 ASCII commands through the Rear Panel DB9 Remote Port. The Model 7369 is enclosed in a 1U, full rack size, black anodized chassis designed to provide EMI/RFI shielding and fit into a standard 19" rack.

Allows quick connection to any one of two DB9 interface devices from one COMMON port for each channel.
The switch ports are transparent to all data.
All (9) pins of the DB9 interface are switched.
Indepdendent control of each channel with gang controls.
Front-panel pushbutton control.
Switch maintains position on power loss and continues to pass data.
Control of the switch position from a 10/100-Base-T LAN Ethernet environment.
Remote Control RS232, Telnet command interface or Graphical User Interface that allow the user to control the switch position, lockout the front-panel operation and obtain switch status.
Remote control of the switch is password protected, where the password protection can be disabled.
Front-panel LED's display present position and power status.
Attractive anodized black box packaging provides EMI/RFI sheilding.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2311

Model 7305 Single Channel RJ45 CAT5e A/B Switch with Exclusive Remote control

Convenient DIN rail mounting. Ideal for use in process control systems

SPECIFICATIONS:

PORT CONNECTORS: (3) RJ45 female connectors labeled A, B, and COMMON.
REMOTE VOLTAGE CONTROL: (1) DB9 female port accepts low power dry contact logic to allow the control of the switch position.
DISPLAY: (2) Front panel LED's display switch position.
POWER: 24 VDC required to be supplied to the unit.
DIMENSIONS: DIN Rail Mount Package: 1.75"W x 4.25"H x 8.0"D. (4.4 x 10.8 x 20.3 cm)
WEIGHT: Approximately 1.4 lbs. (0.7 Kg)

FEATURES:

Allows quick connection to any one of two RJ45 devices from one COMMON device.
The switch ports are transparent to all data.
All (8) pins of the RJ45 interface are switched.
Certified for Cat5e compliance.No front panel control.
Exclusive Remote Control.
Remote voltage control provides low power dry contact logic to allow the control of the switch position.
Switch reverts to A position on power loss and continues to pass data.
Upon power up, unit switches based on state of remote port.
Front panel LED's display switch position and power status.
Eliminates the need to plug and unplug cables.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length RJ45 cables available for your switch installation,

The PathWay® Model 7305 Single Channel RJ45 Cat5e A/B switch with Voltage Control Remote allows the user the capability of accessing two separate devices, ports A and B, via connection through a device connected to the Common port. The Model 7305 is enclosed in a slim black anodized chassis designed to provide EMI/RFI shielding and mount on a standard DIN Rail.

There is no "local" or front panel switch control on the unit. The Model 7305 can ONLY be switched remotely from the DB9 Remote port located on the bottom of the unit.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2284

Model 9451 DB25 A/B/C Switch, Manual, Rackmount

The Model 9451 allows the user to access three DB25 devices connected to its A, B and C ports with one DB25 device connected to its Common port. Switching between devices A, B and C is quick and easy via the front panel rotary selector. No need to plug and unplug cables; no chance for network reconfiguration errors. The Model 9451 is manually operated, requiring no power.

Features:

Allows quick connection to any one of three DB25 devices from one COMMON device.
Manual operation via front-panel rotary switch.
High reliability sealed switch with self-wiping low impedance contacts.
Transparent to data speed and format.
All 25 pins of the DB25 interface are switched.
Eliminated the need to plug and unplug cables.No external power required.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB25 cables available for your switch installation.
Lifetime guarantee against manufacturing defects.
Electro Standards manufactures a wide range of RS-232 network switches.

Specifications:

PORT CONNECTORS: (4) DB25 female connectors labeled A, B, C and Common.
FRONT PANEL CONTROLS: (1) Rotary Switch on front panel selects A, B, C.
POWER: Manually operated. No power required.
DIMENSIONS: Rackmount 19.0"W x 1.75"H x 8.0"D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 2.0 lbs. (0.9 kg.)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2280

Model 7470 Single Channel RJ45, CAT5e, A/B Switch with SSH and HTTPS GUI Remote Control

SSH: Secure SHell protocol
HTTPS: Hypertext Transfer Protocol Secure

SPECIFICATIONS:

PORT CONNECTORS: (3) RJ45 (F) connectors labeled A, B and COMMON.
DISPLAY: (2) Front Panel red LED's indicate switch position and power status.
FRONT PANEL CONTROL: (1) Front panel pushbutton allows local switching.
REMOTE: (1) RJ45(F) connector on rear panel accepts 10/100 Base-T LAN Ethernet, SSH and Secure Graphical User Interface.
POWER: UL approved 100 VAC/240VAC, 50HZ/60Hz wall mount power module supplies 12 VDC, 500mA to the unit. Has 2-prong, US, non-polarized plug.
DIMENSIONS: Rackmount configuration 19.0"W x 1.75"H x 8.0"D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.2 lbs (1.0 Kg)

CAT5e A/B SWITCH WITH SSH AND HTTPS GUI REMOTE APPLICATION: The drawing shows a NETWORK or COMMON device connected to the RJ45 COMMON port with access to two other NETWORKS or devices connected to the RJ45 A and B ports. The RJ45 port is 10/100Base-T LAN Connection with Password Protection, TLS/SSL, and Secure GUI Remote.

FEATURES:

Allows quick connection to any one of two RJ45 devices from one COMMON device.
Eliminates the need to plug and unplug cables.
The switch ports are transparent to all data.
Switches all eight pins of the RJ45 interface.
All (8) pins of the RJ45 interface are switched.
Front panel pushbutton control.
Front panel LED's display present position and power status.
Certified for CAT 5e compliance.
Control of the switch position from a 10/100Base-T LAN Ethernet environment.
Remote Control SSH Command Interface or Graphical User Interface that allows the user to control switch position, lockout front panel operations, and obtain switch status.
Remote control of the switch is secured by user login with password protection and TLS/SSL security cryptographic protocols.
IP addressable.
Switch maintains last set position on power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length RJ45 cables available for your switch installation.

The PathWay® Model 7470 Single Channel RJ45 Cat5e A/B Switch with SSH and HTTPS GUI allows the user the capability of sharing a single port interface device, connected to the COMMON port, among two other devices, connected to the A and B ports. Remote Control access can be accomplished using an Ethernet 10/100 BASE-T connection and either SSH commands or a secure Graphical User Interface. The Model 7470 is enclosed in a 1U, full rack size, black anodized chassis designed to provide EMI/RFI shielding and fit in a standard 19" rack.

Option: Wide Range Power Module: (Cat No. 517277) CE, RoHs, and UL listed table mount power module, 100VAC/240VAC, 50/60Hz for use in place of the standard power module that is included with the unit. Has IEC 60320 C14 inlet. Ideal for international applications.

Ethernet Remote Port, I.P. Addressable, with HTTPS GUI

UTILIZING THE USER FRIENDLY REMOTE GRAPHICAL USER INTERFACE SOFTWARE
To connect to the switch from a workstation or computer having access to the LAN that the switch's LAN port is connected to, simply launch a standard web browser and type in the url: https:// Note that the "s" in "https" is required. The Java Applet will automatically be uploaded from the switch upon connection. The environment requirement for the GUI is Java 1.7 and above.

LOGGING INTO THE REMOTE CONTROL GUI
The default username and password to login to the switch is "admin" and "ESL02921", respectively. Any SSH username/password changes made via the Remote Configuration GUI will be accepted here.

CHANGING POSITION AND LOCK STATUS
To change the switch position, click on the radio button "A" or "B" as desired. Locking and unlocking the front panel pushbutton can be done by clicking on the "Locked" or "Unlocked" radio button.

QUERYING THE STATUS OF THE UNIT
Once connected, the GUI will stay up-to-date on the current position and status of the unit. Any changes that are made outside of the GUI, such as by pushbutton, will be reflected in the GUI. These changes will cause the radio buttons of the GUI to automatically change to show the new status. The GUI will report the source of the most recent change in the bottom left of the panel.

INFORMATION AND IP CONFIGURATION
The Remote Control GUI also provides access to unit information such as the firmware/software version and the serial number. It also provides a link to the Remote Configuration GUI. Note that the Remote Configuration GUI link works regardless of whether the user is logged into the Remote Control GUI or whether the applet loads at all.

RJ45 Patchcords, All Lengths, All Colors, In Stock!

For custom network switches call our friendly customer support staff at 401-943-1164, email eslab@electrostandards.com, or complete our online form: http://www.electrostandards.com/Products-Custom/Copper-Switch/

PathWay® is a registered trademark of Electro Standards Laboratories.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2431

Path Way® Remotely Controllable Network Switch
Model 9501 Quad Channel A/B Switch with Serial Remote ControlSwitch position can be manually controlled in the event of power loss.

The PathWay® Model 9501 Quad Channel A/B Switch with Serial Remote Control allows the user the capability of sharing a single port interface device connected to the COM port among two other devices connected to the A and B ports for each channel.

The network switch may be controlled locally using the front panel rotary switches or remotely from a DB9/F port located on the rear of the unit using Serial ASCII Commands when the rotary switch is set to the REMOTE position. Switch position states may be attained locally via the front panel LED display or remotely using Serial Commands.

Features:

The switch ports are transparent to all data.
17 Pins of the V.35 interface are switched. (Three V.35 channels)
All pins of the DB25 interface are switched. (One DB25 channel)
Local position control using the front panel rotary switches.
Serial Remote Control to query the status of the Model 9501 and change its position only when rotary switch is set to REMOTE.
Independent control of each channel.
The front panel rotary switches allow manual switching of the Model 9501 at all times, including during power loss.
The Model 9501 maintains position and continues to pass data during power loss while in the REMOTE position.
Front panel LED's display the current switch position and the switch power status.
Custom length DB25 and V.35 cable assemblies are available. Order your cables along with the switches for quick, plug & play, installation!

Specifications:

Port Connectors: (9) V.35 female connectors labeled A, B, and Common provide input/output for the three V.35 channels. (3) DB25 female connectors labeled A, B and Common provide input/output for the DB25 channel.

Front Panel Controls: (4) Rotary switches allow local control.
Display: (8) Front panel LED's display switch position and power status.
Remote: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: Rackmount configuration 19.0" W x 3.5" H x 10.0" D.
Weight: Approximately 8.0 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1975

Model 8086 RJ45 A/B Switch, Manual, CAT6 Compliant

The Model 8086 enables access to two 100 Base-T networks up to 1000 Mbps. The Model 8086 Category 6 A/B Switch allows the user to reroute data between two networks with a simple flip of a switch. The unit supports all 8 pins of the RJ45 Cat6 interface. No need to plug and unplug cables thereby eliminating connector wear.

SPECIFICATIONS:

PORT CONNECTORS: (3) RJ45 female connectors labeled A, B, and COMMON.
FRONT PANEL CONTROL: (1) Rotary Switch on front panel selects A or B.
PINS SWITCHED: All 8 pins are switched.
POWER: Manually operated. No power required.
ENCLOSURE: Shielded aluminum enclosure.
DIMENSIONS: 5.3"W x 2.6"H x 7.3"D (13.5 x 6.6 x 18.5 cm)
WEIGHT: Approximately 1.0 lb (0.5 kg)

FEATURES:

Allows access to two networks from one computer or workstation.
Certified for Cat6 compliance.
High quality sealed switch with self wiping contacts.
Eliminates the need to plug and unplug cables.
Transparent to data format.
No external power required.
Manual control via knob located on front panel.Rated for 10/100/1000 networks (Up to Cat6).
(3) RJ45 Connections, ports A, B, and Common, located on rear panel.
Aluminum case provides EMI shielding.
Switching mechanism is sealed precious metal contact switch.
Custom length CAT6 cables available for your switch installation.

Custom Network Switches are available. Contact us by phone, email, or complete the Online Custom Products Form. http://www.electrostandards.com/Products-Custom/Copper-Switch/

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2281

Model 7316 16-Channel RJ45/CAT5e A/B Switch, Telnet Remote Access & Control, IP Addressable, Rackmount Englosure with Gang Operation of Multiple Units

The PathWay® Model 7316 16-Channel RJ45 CAT5e A/B Switch with Remote Access allows the user the capability of accessing, on each channel, one of two separate devices via a device connected into the channel's Common port. The Model 7316 is enclosed in a 2U, full rack size, all metal black chassis designed to provide EMI/RFI shielding.

The switch may be controlled manually via the front panel pushbuttons, or remotely using an Ethernet connection and Telnet commands. Gang operation, when enabled, allows all units in the gang to stay synchronized in the same position. Switch position, operating mode, and power status are displayed by front panel LED indicators, and can be queried remotely.

SPECIFICATIONS:

PORT CONNECTORS:

(48) RJ45 female connectors. Sixteen labeled 1-16 in each of the groups, A, B, and COMMON.
GANG IN/OUT CONNECTORS: (1) RJ45 female IN connector (gang control cabled in from previous unit); and (1) RJ45 female OUT connector (gang control cabled out to next unit).
FRONT PANEL CONTROLS: (2) Manual pushbuttons allow local A/B switching. (1) Gang pushbutton allows the gang of the unit to be changed - include/exclude the unit from Gang control
.DISPLAY: (2) Red LED's indicate the position, (1) Yellow LED indicates the gang mode, (1) Green LED indicates the present power status.
REMOTE CONTROL: (1) RJ45 connector accepts Ethernet connection to support remote operation via TELNET command protocol.
POWER: UL approved 100VAC/240VAC, 50Hz/60Hz wall mount power module supplies 12 VDC, 500 mA to the unit. Has 2-prong, US, non-polarized plug.
DIMENSIONS: 19.0" W x 3.5" H x 14" D. (48.3 x 8.9 x 35.6 cm)
WEIGHT: 9.0 lbs. (4.0 Kg)

FEATURES:

Each channel allows access to two RJ45 CAT5e compliant networks from one COMMON port.Switches all 8 pins of the RJ45 interface.
All 16 channels switch simultaneously.Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Certified for Cat5e compliance.
Local control via front-panel pushbutton.
Front panel LED's display switch position, mode of control, and power status.
Retains last switch position in the event of power loss and continues to pass data.
Gang operation mode allows all connected units (via rear panel IN/OUT RJ45 ports) to stay synchronized in same position.
Gang operation of multiple units to simultaneously control 32 channels, 48 channel, 64 channels, etc.
The RJ45 Ethernet REMOTE port accepts Telnet commands to control switch position, lockout front panel operation, and obtain switch status.
Attractive all metal black box packaging provides EMI/RFI shielding.
Rackmount configuration is standard.
Power Supply included.
Custom length RJ45 CAT5e cables available for your installation.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2443

The PathWay® Model 7463 8-Channel RJ45 A/B Switch allows the user the capability of sharing a single port interface device connected to the Common port among two other devices connected to the A and B ports for each channel. The Model 7463 is enclosed in a 1U, full rack size, all metal black chassis designed to provide EMI/RFI shielding and fit in a standard 19" rack.

The switch may be controlled manually via front panel pushbuttons only. Switch position status may be attained via the front panel LED display.

Features:

Each channel allows access to two RJ45 Cat5e networks from one COMMON network or device.
The switch ports are transparent to all data.
All (8) pins of the RJ45 interface are switched via break-before-make electromechanical relays.
The unit maintains last set position on power loss and continues to pass data.
Front panel pushbutton control.Independent control of channels, with gang commands.
Front panel LED's display present position and power status.
Certified for Cat5e compliance.
Attractive all metal black box packaging provides EMI/RFI shielding.
Custom length RJ45 Cat5e cables available for your switch installation.

Specifications:

PORT CONNECTORS: (24) RJ45(F) connectors total. (8) A ports (8) B ports (8) Common ports
FRONT PANEL CONTROLS: (8) Pushbuttons labeled Channel 1 through Channel 8.
DISPLAY: (16) Red LED's total indicate the A or B switch positions for each of the eight channels.
POWER: UL Approved 100VAC/240VAC, 50Hz/60Hz wall mount power module supplies 12VDC, 500 mA to the unit. Has 2-prong, US, non-polarized plug.
DIMENSIONS: 19" W x 1.75" H x 10.0" D. (48.3 x 4.4 x 25.4 cm)
WEIGHT: 6.2 lbs. (2.9 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2467

Home \| Log In List Company	Search:
Newsroom \| Newsletters \| Blog Contact Us
Marketing Solutions