Electro Standards LaboratoriesCranston, RI
 
E-mailE-mail CompanyComputer and GlobeVisit WebsitePhone
Phone: 401-943-1164
Fax: 401-946-5790
 
* Click on an image to enlarge it in a new window *
 Model 6765 Four Channel Logic-to-Fiber Interface Converter
 
The Model 6765 Fiber to Logic media converter is a high speed digital logic level to fiber interface converter from Electro Standards Laboratories.  It translates four input/output logic pairs into four fiber optic pairs, resulting in a total of eight fiber optic connections.  Typical operating speeds are up to 5 Mbps.  Features of these Logic to Fiber Converters include user selectable fiber light ON polarity, convenient ST fiber connectors, and logic test points available for signal monitoring.  The Model 6765 Logic to Fiber Converter features ESD protection on the copper I/O signals.  It is powered by 5 VDC which is filtered and has over voltage and polarity protection.  The Model 6765 Logic to Fiber Interface Converter circuit board is convenient for embedded applications. This fibre optic converter is also available as a desktop unit (Model 6766) has screw terminal strips for easy connection of the copper logic signals.
 
Specifications
 
Optical Interface: (Board and Desktop Unit)
  • TX Power: -17 dBm
  • RX Sensitivity: -27.5 dBm
  • Wavelength: 820 nm/850 nm, multimode
  • Fiber Size: Accepts 50/125 µm, 62.5/125 µm, 100/140 µm

Fiber Polarity: (Board and Desktop Unit)
  • Logical 1 = Light ON/OFF: User Selectable

Copper Interface: (Board and Desktop Unit)
  • Type: TTL Logic
  • Vih range: (1.4 - 2.1)V
  • Vil range: (0.6 - 1.4)V

Bit Rate (nom.): (Board and Desktop Unit)
  • 0 to 5 Mbps, Nominal

Operating Environment: (Board and Desktop Unit)
  • 0°C to +70°C
    • Connectors: (Board Only)
      • Copper I/O:
        • (1) 14-pin 0.1 x 0.1 Male connector

      • Fiber: (8) ST Connectors:
        • (4) for TX Model 6765 / Cat. No. 306765



Get a Quote View Literature
 
   
 Model 6766 Four Channel Logic-to-Fiber Interface Converter
Desktop Version
 
The Model 6766 is a high speed digital logic level to fiber interface converter from Electro Standards Laboratories. It translates four input/output logic pairs into four fiber optic pairs, resulting in a total of eight fiber optic connections. Typical operating speeds are up to 5 Mbps. Features include user selectable fiber light ON polarity, convenient ST fiber connectors, and logic test points available for signal monitoring. The unit features ESD protection on the copper I/O signals. It is powered by 5 VDC which is filtered and has over voltage and polarity protection. The desktop unit (Model 6766) has screw terminal strips for easy connection of the copper logic signals. The converter is also available as a circuit board (See Model 6765) convenient for embedded applications.
 
Specifications
 
Optical Interface: (Board and Desktop Unit)
 
TX Power: -17 dBm
RX Sensitivity: -27.5 dBm
Wavelength: 820 nm/850 nm, multimode
Fiber Size: Accepts 50/125 µm, 62.5/125 µm, 100/140 µm
Fiber Polarity: (Board and Desktop Unit)
Logical 1 = Light ON/OFF: User Selectable
Copper Interface: (Board and Desktop Unit)
Type: TTL Logic
Vih range: (1.4 - 2.1)V
Vil range: (0.6 - 1.4)V
Bit Rate (nom.): (Board and Desktop Unit)
0 to 5 Mbps, Nominal
Operating Environment: (Board and Desktop Unit)
0°C to +70°C
Model 6766 / Cat. No. 306766
 
Connectors: (Desktop Unit)
Copper:
(1) 4 Position Terminal Strip (TXA - TXD)
(1) 4 Position Terminal Strip (RXA - RXD)
(2) 4 Position Terminal Strip (GND)
Fiber: (8) ST Connectors
(4) TX
(4) RX
Power: (Desktop Unit)
UL approved 120VAC, 60Hz wall mount power module supplies 12VDC, 500mA to the unit.
Option: (Desktop Unit)
Wide Range Power Module (Cat. No. 517277) CE and UL listed wall mount power module, 100VAC / 240VAC, 50Hz/60Hz in place of standard 120 VAC power module. Ideal for international applications.
Mechanical: (Desktop Unit)
Size: 8.37" W x 1.73" H x 8" D
Weight: 2.2 lbs (1.04 kg)
Optional DIN Rail Mounting Kit: ESL PN: 520418 for the Model 6766, Desktop Unit.
 
Custom length Fiber Optic Cables. Fast Delivery!
Get a Quote View Literature
 
   
 Model 4172 Very High Speed Ruggedized ST Duplex Fiber-to-Multi-Point RS485/422 Interface Converter
 
- Ideal for RS485 Multi-Point Applications
 
The Model 4172 is a high speed ruggedized ST Duplex Fiber to RS485/422 interface converter from Electro Standards Laboratories. Typical operating speeds are up to 5 Mbps for RS485/422 to fiber conversion. When operating in RS485/422 mode, the converter can be configured for 2-wire half duplex or 4-wire full duplex operation.
 
This converter provides an industrial solution for applications requiring a single point-to-point or a multi-point communications link over short and long distances. Typical applications include PC to PC long distance communications, factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, ATMs and serial communications in harsh environments.
 
The Model 4172 is designed to operate from -40C to +85C and is a member of Electro Standards Laboratories rugged community media converter family. The unit features ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. The unit's power input is protected from transients and features 3kVDC isolation to prevent system ground loops.
 
It can be powered from a wide input range of 10VDC-36VDC, with models also available for other voltage ranges such as 4.5VDC-9VDC and 19VDC-72VDC. Other features include user selectable fiber polarity, and also TX, RX and Power indicator LEDs. Accessories include DIN rail mounting hardware and various AC input voltage power supplies.
 
Specifications:
Fiber Interface:
Connectors: Fiber Optic ST Duplex
TX Power: -12.5 dBm
RX Sensitivity: -27.5 dBm
Optical Budget: 15 dB
Max. Link Distance with 62.5/125 µm fiber:
5.35 kM at up to 5 Mbps, 25C
3.75 KM at up to 5 Mbps, -40C to +85C
Wavelength: 820 nm/850 nm, multimode
Fiber Size: 50/125 µm, 62.5/125 µm, 100/140 µm
Fiber Polarity:
Logical 1 = Light ON/OFF: Jumper Selectable
Copper Interface:
Connectors: DB9, Female
Type: RS485 (2-wire/4-wire)
Terminations: RS485 120 Ohm jumber selectable
Bit Rate (nom.)
RS485/422, 0 to 5 Mbps
Network Configurations:
RS485/422 Point-to-Point
Multi-Point (Default ~280 uSec TX disable time)
(User configurable TX disable time via a single thru-hole resistor)
Indicators:
LEDs: TXD, RXD, PWR
Power:
Input Power: 10VDC-36VDC std, 4.5VDC-9VDC, 19VDC-72VDC, Others at
1.5W.
Isolation: 3 kVDC
Operating Environment:
-40C to +85C
Model 4172 Mechanical (Desktop Unit):
Model / Cat No: 4172 / 304172
Size: 5" x 4.25" x 1.4"
Weight: 10.1 oz (286g)
Mounting: 4 Threaded Holes Std, DIN Rail Optional
Get a Quote View Literature
 
   
 Model 4162 High Speed Fiber-to-USB Converter/Extender, Host, Desktop Configuration
 
The Model 4162 is a Host that works with Model 4169 4-Port Hub to extend USB connections via a high speed Fiber interface. The units convert USB 2.0 compliant data from a standard PC Host interface over fiber to a remote 4-Port powered Hub.
 
The Models 4162 and 4169 are ideal for applications involving PC communications that require high speed, secure communications, and optical isolation. They are ideal for extending USB communications in environments that are subject to high EM or RF Interference that might corrupt communications over a copper interface. Typical applications include industrial control, KVM extension, remote desktop USB connections, remote USB device sharing (printer, scanner, storage, etc.). The units offer true plug and play operability with support for Windows®, Mac OS®, Linux®, and support all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480 Mbps.
 
The units are designed to operate from -0°C to +50°C and the set is a member of Electro Standards Laboratories' rugged media converter family. The units feature ESD protection circuitry on all copper USB I/O interfaces. Both units' power inputs are protected from transients and the 4-Port Hub (Model 4169) provides the USB standard of 500mA per port. The units feature; Power, Link, Host (Model 4162) and Port Active (Model 4169) indicator LEDs. The converters are available in a desktop package with optional DIN rail mounting hardware.
 
Specifications:
 
USB Interface
Connectors: Model 4162 - 1x USB Type B, High Retention
Model 4169 - 4x USB Type A,
(5V @500mA/port)
 
USB Data Format:
Type: USB 2.0 Compliant (Backwards compatible USB 1.1)
Rate: Supports Low Speed (1.5 Mbps),
Full Speed (12 Mbps), and High Speed
(480 Mbps) USB Data transfer rates.
 
Fiber Interface:
Connectors: Fiber Optic LC SFP Transceiver
TX Power: -6.5 dBm (Typical)
RX Sensitivity: -21.5 dB
Optical Budget: 14.5 dB
Max. Link Distance with 62.5/125 µm fiber: 500 Meters.
Fiber Size: 50/125 µm, 62.5/125 µm, 100/140 µm
Wavelength: 820 nm, multimode
 
Indicators:
LEDs: Model 4162 - Power, Host, Link
Model 4169 - Power, Link, Port Active
 
Power:
Input Power: 5Vdc @ 2.5W (Model 4162)
5Vdc @ 15W (Model 4169)
Connectors: DC Power Jack
USB Powered (Optional for Model 4162)
 
Operating Environment:
-0°C to +50°C
 
Model 4162 Mechanical (Desktop Unit):
Model / Cat No: 4162 / 304162
Size: 5.0" x 4.25" x 1.4"
Weight: Approx. 11.5 oz (327g)
Mounting: Desktop Std, DIN rail (Optional)
 
Model 4169 Mechanical (Desktop Unit):
Model / Cat No: 4169 / 304169
Size: 5.0" x 4.25" x 1.4"
Weight: Approx. 11.5 oz (317g)
Mounting: Desktop Std, DIN rail (Optional)
Get a Quote View Literature
 
   
 Model 4169 High Speed Fiber-to-USB Converter/Extender, 4-Port Hub, Desktop Configuration
 
The Model 4169 is a 4-Port Hub that works with Model 4162 Host to extend USB connections via a high speed Fiber interface. The units convert USB 2.0 compliant data from a standard PC Host interface over fiber to a remote 4-Port powered Hub.
 
The Models 4162 and 4169 are ideal for applications involving PC communications that require high speed, secure communications, and optical isolation. They are ideal for extending USB communications in environments that are subject to high EM or RF Interference that might corrupt communications over a copper interface. Typical applications include industrial control, KVM extension, remote desktop USB connections, remote USB device sharing (printer, scanner, storage, etc.). The units offer true plug and play operability with support for Windows®, Mac OS®, Linux®, and support all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480 Mbps.
 
The units are designed to operate from -0°C to +50°C and the set is a member of Electro Standards Laboratories' rugged media converter family. The units feature ESD protection circuitry on all copper USB I/O interfaces. Both units' power inputs are protected from transients and the 4-Port Hub (Model 4169) provides the USB standard of 500mA per port. The units feature; Power, Link, Host (Model 4162) and Port Active (Model 4169) indicator LEDs. The converters are available in a desktop package with optional DIN rail mounting hardware.
 
Specifications:
 
USB Interface
Connectors: Model 4162 - 1x USB Type B, High Retention
Model 4169 - 4x USB Type A,
(5V @500mA/port)
 
USB Data Format:
Type: USB 2.0 Compliant (Backwards compatible USB 1.1)
Rate: Supports Low Speed (1.5 Mbps),
Full Speed (12 Mbps), and High Speed
(480 Mbps) USB Data transfer rates.
 
Fiber Interface:
Connectors: Fiber Optic LC SFP Transceiver
TX Power: -6.5 dBm (Typical)
RX Sensitivity: -21.5 dB
Optical Budget: 14.5 dB
Max. Link Distance with 62.5/125 µm fiber: 500 Meters.
Fiber Size: 50/125 µm, 62.5/125 µm, 100/140 µm
Wavelength: 820 nm, multimode
 
Indicators:
LEDs: Model 4162 - Power, Host, Link
Model 4169 - Power, Link, Port Active
 
Power:
Input Power: 5Vdc @ 2.5W (Model 4162)
5Vdc @ 15W (Model 4169)
Connectors: DC Power Jack
USB Powered (Optional for Model 4162)
 
Operating Environment:
-0°C to +50°C
 
Model 4162 Mechanical (Desktop Unit):
Model / Cat No: 4162 / 304162
Size: 5.0" x 4.25" x 1.4"
Weight: Approx. 11.5 oz (327g)
Mounting: Desktop Std, DIN rail (Optional)
 
Model 4169 Mechanical (Desktop Unit):
Model / Cat No: 4169 / 304169
Size: 5.0" x 4.25" x 1.4"
Weight: Approx. 11.5 oz (317g)
Mounting: Desktop Std, DIN rail (Optional)
Get a Quote View Literature
 
   
 The Model 4162-DIN is a Host that works with Model 4169-DIN 4-Port Hub to extend USB connections up to 500 meters via a high speed Fiber interface. The units convert USB 2.0 compliant data from a standard PC Host interface over fiber to a remote 4-Port powered Hub.
 
Two configurations are available for each model:
(1) Model 4162 Host Desktop Unit, for applications requiring an enclosure.
(2) Model 4162-DIN Host Unit for applications requiring mounting on a DIN rail.
(3) Model 4169 4-Port Hub Desktop Unit, for applications requiring an enclosure.
(4) Model 4169-DIN 4-Port Hub Unit for applications requiring mounting on a DIN rail.
 
The Models 4162-DIN, 4162 and 4169-DIN, 4169 are ideal for applications involving PC communications that require high speed, secure communications, and optical isolation. They are ideal for extending USB communications in environments that are subject to high EM or RF Interference that might corrupt communications over a copper interface. Typical applications include industrial control, KVM extension, remote desktop USB connections, remote USB device sharing (printer, scanner, storage, etc.). The units offer true plug and play operability with support for Windows®, Mac OS®, Linux®, and support all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480 Mbps.
 
The units have been tested to operate from 0°C to +50°C (component ratings meet or exceed 0°C to 70°C) and the set is a member of Electro Standards Laboratories' rugged media converter family. The units feature ESD protection circuitry on all copper USB I/O interfaces. Both units' power inputs are protected from transients and the 4-Port Hub (Model 4169, 4169-DIN) provides the USB standard of 500mA per port. The units feature; Power, Fiber Link Active, Host Active (Model 4162, 4162-DIN) and Port Active (Model 4169, 4169-DIN) indicator LEDs. The converters are available in a desktop package or DIN rail mounting hardware.
 
Specifications:
 
USB Interface
Connectors: Model 4162 - 1x USB Type B, High Retention
Model 4169 - 4x USB Type A,
(5V @500mA/port)
 
Model 4162-DIN - 1x USB Type B, High Retension
Model 4169-DIN - 4x USB Type A,
(5V @500mA/port)
 
USB Data Format:
Type: USB 2.0 Compliant (Backwards compatible USB 1.1)
Rate: Supports Low Speed (1.5 Mbps),
Full Speed (12 Mbps), and High Speed
(480 Mbps) USB Data transfer rates.
 
Fiber Interface:
Connectors: Fiber Optic LC SFP Transceiver
TX Power: -6.5 dBm (Typical)
RX Sensitivity: -21.5 dB (Typical)
Optical Budget: 14.5 dB
Max. Link Distance with 50/125 µm fiber: 500 Meters
LC/LC Duplex fiber cable - Cat. No. 986147
Max. Link Distance with 62.5/125 µm fiber: 275 Meters
LC/LC Duplex fiber cable - Cat. No. 986017
Wavelength: 850 nm, multimode
 
Indicators:
LEDs: Model 4162 - Power, Fiber Link Active, Host Active
Model 4169 - Power, Fiber Link Active, Port Active
 
Model 4162-DIN - Power, Fiber Link Active, Host Active
Model 4169-DIN - Power, Fiber Link Active, Port Active
 
Power:
Input Power: 5Vdc @ 2.5W (Model 4162)
5Vdc @ 15W (Model 4169)
 
5Vdc @ 2.5W (Model 4162-DIN)
5Vdc @ 15W (Model 4169-DIN)
 
Connectors: DC Power Jack
USB Powered (Optional for Model 4162)
USB Powered (Optional for Model 4162-DIN)
 
Operating Environment:
Tested operation, 0°C to +50°C; component ratings
meet or exceed 0°C to 70°C.
 
Model 4162 Mechanical (Desktop Unit):
Model / Cat No: 4162 / 304162
Size: 5.0" x 4.25" x 1.4"
Weight: Approx. 11.5 oz (327g)
Mounting: Desktop Std, DIN rail (Optional)
 
Model 4169 Mechanical (Desktop Unit):
Get a Quote View Literature
 
   
 The Model 4169-DIN is a 4-Port Hub that works with Model 4162-DIN Host extend USB connections up to 500 meters via a high speed Fiber interface. The units convert USB 2.0 compliant data from a standard PC Host interface over fiber to a remote 4-Port powered Hub.
 
Two configurations are available for each model:
(1) Model 4162 Host Desktop Unit, for applications requiring an enclosure.
(2) Model 4162-DIN Host Unit for applications requiring mounting on a DIN rail.
(3) Model 4169 4-Port Hub Desktop Unit, for applications requiring an enclosure.
(4) Model 4169-DIN 4-Port Hub Unit for applications requiring mounting on a DIN rail.
 
The Models 4162-DIN, 4162 and 4169-DIN, 4169 are ideal for applications involving PC communications that require high speed, secure communications, and optical isolation. They are ideal for extending USB communications in environments that are subject to high EM or RF Interference that might corrupt communications over a copper interface. Typical applications include industrial control, KVM extension, remote desktop USB connections, remote USB device sharing (printer, scanner, storage, etc.). The units offer true plug and play operability with support for Windows®, Mac OS®, Linux®, and support all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480 Mbps.
 
The units have been tested to operate from 0°C to +50°C (component ratings meet or exceed 0°C to 70°C) and the set is a member of Electro Standards Laboratories' rugged media converter family. The units feature ESD protection circuitry on all copper USB I/O interfaces. Both units' power inputs are protected from transients and the 4-Port Hub (Model 4169, 4169-DIN) provides the USB standard of 500mA per port. The units feature; Power, Fiber Link Active, Host Active (Model 4162, 4162-DIN) and Port Active (Model 4169, 4169-DIN) indicator LEDs. The converters are available in a desktop package or DIN rail mounting hardware.
 
Specifications:
 
USB Interface
Connectors: Model 4162 - 1x USB Type B, High Retention
Model 4169 - 4x USB Type A,
(5V @500mA/port)
 
Model 4162-DIN - 1x USB Type B, High Retension
Model 4169-DIN - 4x USB Type A,
(5V @500mA/port)
 
USB Data Format:
Type: USB 2.0 Compliant (Backwards compatible USB 1.1)
Rate: Supports Low Speed (1.5 Mbps),
Full Speed (12 Mbps), and High Speed
(480 Mbps) USB Data transfer rates.
 
Fiber Interface:
Connectors: Fiber Optic LC SFP Transceiver
TX Power: -6.5 dBm (Typical)
RX Sensitivity: -21.5 dB (Typical)
Optical Budget: 14.5 dB
Max. Link Distance with 50/125 µm fiber: 500 Meters
LC/LC Duplex fiber cable - Cat. No. 986147
Max. Link Distance with 62.5/125 µm fiber: 275 Meters
LC/LC Duplex fiber cable - Cat. No. 986017
Wavelength: 850 nm, multimode
 
Indicators:
LEDs: Model 4162 - Power, Fiber Link Active, Host Active
Model 4169 - Power, Fiber Link Active, Port Active
 
Model 4162-DIN - Power, Fiber Link Active, Host Active
Model 4169-DIN - Power, Fiber Link Active, Port Active
 
Power:
Input Power: 5Vdc @ 2.5W (Model 4162)
5Vdc @ 15W (Model 4169)
 
5Vdc @ 2.5W (Model 4162-DIN)
5Vdc @ 15W (Model 4169-DIN)
 
Connectors: DC Power Jack
USB Powered (Optional for Model 4162)
USB Powered (Optional for Model 4162-DIN)
 
Operating Environment:
Tested operation, 0°C to +50°C; component ratings
meet or exceed 0°C to 70°C.
 
Model 4162 Mechanical (Desktop Unit):
Model / Cat No: 4162 / 304162
Size: 5.0" x 4.25" x 1.4"
Weight: Approx. 11.5 oz (327g)
Mounting: Desktop Std, DIN rail (Optional)
 
Model 4169 Mechanical (Desktop Unit):
Model / Cat No: 4169 / 304169
Size: 5.0" x 4.25" x 1.4"
Weight: Approx. 11.5
Get a Quote View Literature