 | Products / Services: |  |
| Click on a category to see this company's sample pictures for the chosen category. | ||
 |  |
| Electro Standards Laboratories | Cranston, RI | |
| |||||||||
| * Click on an image to enlarge it in a new window * | |||||||||
.jpg) | CellMite® Model 4325B Intelligent Digital Signal Conditioner with TEDS-Tag Auto Identification. CellMite M4325B is a compact digital signal conditioner that connects directly to a standard strain-gage-based load cell, extensometer, or pressure sensor and simulataneously generates a serial output for connection to a PC as well as a +/-10V analog output. CellMite® M4325B compensates for transducer nonlinearities using its integrated 6-point calibration capability not found in standard signal conditioners. Its multi-drop RS232 serial port, unit addressing capabilities, and simple command set allow for connection of multiple units in a serial network configuration. The TEDS-Tag® auto identification feature with integrated electronic tags allows the CellMite® to automatically select the correct sensor calibration and analog output for scaling for the connected transducer. CellMite® features a nonvolatile memory for parameter and calibration storage, the ability to select between three transducers, multi-point and mV/V calibration, remote sense excitation, and a 24-bit internal resolution with 16-bit analog output.   | ||||||||
.jpg) | CellMite® Model 4326B Embedded Digital Signal Conditioner with TEDS-Tag Auto Identification. Model 4326B Transforms Standard Transducer into a Smart Cell! CellMite® Model 4326B is a compact digital signal conditioner unit that can be directly integrated into a standard stain gage transducer such as a load cell or extensometer. CellMite® simultaneously generates a serial digital output for connection to a PC as well as a +/- 10V analog output. CellMite® compensates for transducer nonlinearities using its integrated 6-point calibration capability not found in standard signal conditioners. Its multi-drop RS232 serial port, unit addressing capabilities, and simple command set allow for connection of multiple units in a serial network configuration. The TEDS-Tag® auto identification feature with integrated electronic tags allows the CellMite® to automatically select the correct sensor calibration and analog output for scaling for the connected transducer. CellMite® features a nonvolatile memory for parameter and calibration storage, the ability to select between three transducers, multi-point and mV/V calibration, remote sense excitation, and a 24-bit internal resolution with 16-bit analog output. | ||||||||
.jpg) | CellMite® Model 4327 Embedded Digital Signal Conditioner Board for Strain Gage Sensors CellMite Model 4327 Board with auto identifying display is an embedded digital signal conditioner board that connects directly to a standard strain gage transducer and simultaneously generates a serial output for direct connection to a PC, a scalable +/-10V analog output for interface to data acquisition systems, and a 16 character auto identifying display for direct readout viewing. The Model 4327 has on board storage for three calibrated sensors, each with integrated 6-point calibration and independent user specified dispay setup parameters. When a TEDS-Tag® capable sensor is connected to the unit, that sensor is immediately identified by the Model 4327 and its stored calibration data and display configuration are automatically loaded. If that sensor is removed and another TEDS-Tag® sensor is connected, then its calibration data and display data are automatically loaded. Unlike other units in its class, auto sensor identification and auto display identification require no user intervention and prevent field personnel from making costly mistakes due to incorrect sensor calibration or display setup. The CellMite® Model 4327 can be fully operated with a computer or simply setup by a computer and then used as a stand alone intelligent digital signal conditioner with auto indentifying analog and alphanumeric display outputs. The CellMite® Model 4327 integrates an intelligent 16 character backlit alphanumeric display with a CellMite® Model 4325A. | ||||||||
.jpg) | CellMite Model 4329 Wireless Intelligent Digital Signal Conditioner. CellMite Model 4329 connects directly to a standard strain gage, load cell, extensometer, or pressure transducer. CellMite® Model 4329 features a nonvolatile memory for parameter and calibration storage, the ability to select between three transducers, multi-point and mV/V calibration, remote sense excitation, and a 24-bit internal resolution with 16-bit analog output. CellMite® compensates for transducer nonlinearities using its integrated 6-point calibration. Its wireless communication port and simple command set allow connection of up to 8 units in a wireless serial network configuration. | ||||||||
.jpg) | CellMite LVDT AC Excitation Dual Channel Embedded Digital Signal Conditioner Board. The Model 4331-200 CellMite® LVDT embedded digital signal conditioner board connects directly to two standard AC LVDT (Linear Variable Differential Transformer) transducers and simultaneously generates a serial output for connection to a PC and a +/-10V analog output. The CellMite® LVDT embedded conditioning board can be operated with a computer or simply setup by a computer and then used as a stand-alone intelligent LVDT digital signal conditioner with analog output. The Model 4331-200 CellMIte® LVDT has on board storage for up to three calibrated LVDTs, each with integrated 6-point calibration that can be used to linearize the LVDT outputs. Its multidrop RS232/RS485 serial port allows for connection of multiple units in a serial network configuration. This compact unit is ideally suited for in-situ transducer conditioning and distributed process measurements. It provides OEM users and system integrators with an affordable and complete LVDT-to-PC solution. The CellMite Model 4331-200 features include nonvolatile memory for parameter and calibration storage, ability to select between 3 stored LVDT calibrations, automatic LVDT indentification using TEDS-Tag® technology, solid state relay switches, multi-point and mV/V calibration, ability to locate LVDT core null position, internal generation of precise sine wave AC excitation voltages, remote sense excitation, and 24-bit internal resolution with 16-bit analog output. | ||||||||
.jpg) | CellMite Quad AC/DC Mixed LVDT and Force Measurement Digital Signal Conditioner. The CellMite Model 4336 CellMite® Quad AC/DC is a 4-channel intelligent digital signal conditioner that connects directly to two AC LVDT transducers and two DC strain gage force transducers and provides direct digital data input into the serial port of a standard PC. Precision AC sine wave excitation voltages to power the LVDTs and precision DC excitation voltages to power the force strain gage bridges are generated by the unit. Internal signal conditioning with filtering is applied to all channels and the digitized data is sent in serial form to a standard PC. The Model 4336 also simultaneously generates two +/-10V analog outputs; one that tracks a user selected LVDT channel and one that tracks a user specified force channel. When used in combination with the CellView Multi-Unit GUI software, a complete data acquisition system is formed with synchronized data storage of all channels in an Excel compatible file, and real-time simultaneous viewing of all channels utilizing up to 8 user specified software displays. The Model 4336 CellMIte® Quad AC/DC independently compensates each channel's transducer nonlinearities using its integrated 6-point calibration capability not found in standard signal conditioners. The unit has full range tare capability for the LVDT and strain gage force channels, and dual internal precision shunt resistors for the force channels. The Model 4336 features include nonvolatile memory for parameter and calibration storage, the ability to select between 3 stored LVDT calibrations for two LVDT channels, and the ability to select between 3 stored force transducers for the two strain gage force channels. Also featured are multi-point and mV/V calibration, remote sense excitation, 24-bit internal resolution with 16-bit analog output, and RS232 serial data output that is compatible with off-the-shelf serial to USB converter cables. | ||||||||
.jpg) | CellMite Model 4337 Digital Signal Conditioner with Auto Identifying Display for Strain Gage Sensors. The Model 4337 CellMite® with Auto Identifying Display is a digital signal conditioner from Electro Standards Laboratories that connects directly to a standard strain gage transducer and simultaneously generates a serial output for direct connection to a PC, a scalable +/-10V analog output for interface to data acquisition systems, and a 16-character auto identifying display for direct readout viewing. The Model 4337 has on board storage for three calibrated sensors, each with integrated 6-point calibration and independent user specified display setup parameters. When a TEDS-Tag® capable sensor is connected to the unit, that sensor is immediately identified by the Model 4337 and its stored calibration data and display configuration are atuomatically loaded. If that sensor is removed and another TEDS-Tag® sensor is connected, then its calibration data and display are automatically loaded. Unlike other units in its class, auto sensor identification and auto display identification require no user intervention and prevent field personnel from making costly mistakes due to incorrect sensor calibration or display setup. The CellMIte® Model 4337 can be fully operated with a computer or simply setup by a computer and then used as a stand-alone intelligent digital signal conditioner with auto identifying analog and alphanumeric display outputs. | ||||||||
.jpg) | CellMite Model 4338 LVDT AC Excitation Single Channel Intelligent Digital Signal Conditioner. The Model 4338 CellMite® LVDT digital signal conditioner connects directly to a standard AC LVDT (Linear Variable Differential Transformer) transducer and simultaneously generates a serial output for connection to a PC and a +/-10V analog output. The CellMite® LVDT can be operated with a computer or simply setup by a computer and then used as a stand-alone intelligent LVDT digital signal conditioner with analog output. The Model 4338 CellMIte® LVDT compensates for transducer nonlinearities using its integrated 6-point calibration capability not found in standard signal conditioners. Its multi-drop RS232 serial port and simple command set allow for connection of mulitple units in a serial network configuration. This compact unit is ideally suited for in-situ transducer conditioning and distributed process measurements. The Model 4338 features include nonvolatile memory for parameter and calibration storage, ability to select between 3 stored LVDT calibrations, automatic LVDT indentification using TEDS-Tag® technology, multi-point and mV/V calibration, internal generation on precision sine wave AC excitation voltage, remote sense excitation, and 24-bit internal resolution with 16-bit analog output. | ||||||||
| CellMite Model 4338-200 LVDT AC Excitation Dual Channel Intelligent Digital Signal Conditioner. The Model 4338-200 Dual Channel CellMite® LVDT digital signal conditioner connects directly to two standard AC LVDT (Linear Variable Differential Transformer) transducers and simultaneously generates a serial output for connection to a PC and a +/-10V analog output. The CellMite® LVDT can be operated with a computer or simply setup by a computer and then used as a stand-alone intelligent LVDT digital signal conditioner with analog output. The Model 4338-200 CellMite® LVDT has on board storage for up to three calibrated LVDT's, each with integrated 6-point calibration that can be used to linearize the LVDT outputs. Its multidrop RS232/RS485 serial port and simple command set allows for connection of multiple units in a serial network configuration. This compact unit is ideally suited for in-situ transducer conditioning and distributed process measurement. The Model 4338-200 features include nonvolatile memory for parameter and calibration storage, ability to select between 3 stored LVDT calibrations, automatic LVDT indentification using TEDS-Tag® technology. Solid state relay switches, multi-point and mV/V calibration, and the ability to located LVDT core null position are incorporated into the unit. Internal generation of precision sine wave AC excitation voltages, remote sense excitation, and 24-bit internal resolution with 16-bit analog output are also standard. | ||||||||
.jpg) | CellView Software with Graphing For CellMite® and CellMite® LVDT Digital Signal Conditioners - Real-time graph display of signal conditioner data! The CellView Graphical User Interface is designed to communicate with a precision CellMite® or CellMite LVDT® digitizing signal conditioner that is, itself designed to amplify, filter, and linearize the output of either a strain gauge sensor or an AC LVDT sensor. CellView presents the user with a graphical user interface designed to monitor incoming data from the CellMite® and to visualize and refine the data in a way that is useful to the user. Features: CellView Software with Graphing - User interface connects to either a CellMite® or a CellMite LVDT®. - User interface guides user through adding and removing CellMites®. - CellMites® can hold calibration data for up to three separate sensors. - Sensors may be load cells, extensometers, pressure sensors, LVDT sensors (if attached unit is a CellMite® LVDT), or torque sensors. - User interface guides user through sensor calibrations including MilliVolt per Volt, 2 Point Mass, 6 Point Mass and Shunt Calibrations. - User interface allows user to name CellMites®. - User can tare and reset peak and valley for the sensor. - User can set filter level of the sensor. - User can save and load CellMite® setup and sensor/graph setup information. - Real-Time graph displays incoming test data. - User has the option of setting up a test to start and/or stop automatically. - LEDs inform user of the operational status of CellView - Graph parameters are editable by user. - Graph can be zoomed and panned. - Graph Cursor allows user to get accurate data for a single data point. - User can refine data as it comes into the CellMite® by applying a 5th order polynomial to the data and creating a name of the resulting new unit of measure. - User may export data and/or test information to MS Excel and other spreadsheet programs. - User may save and print reports of tests with user-entered comments. - User may load older tests for viewing and printing. - User can control output using two relay switches set in the main panel as well as analog output of voltage. - User can select the data sampling rate from among four options: 1 Hz, 5 Hz, 20 Hz, and 60 Hz. CellView with Graphing - Real-Time Graphs! Sensor Calibration: CellMites® can internally store up to three sensors' worth of calibration data. When the user selects the active sensor, the CellMite® uses that sensor's calibration data to translate the incoming signal from the sensor into load, extension, pressure or torque data. Main Panel: The graph can be zoomed and panned to show the data the way the user wants it. Then the user can export and save the data, print the main panel, or view and print a report of the test. User Refined Data: Cellview allows the user to apply a conversion factor to incoming data, so that the user can create their own unit of measure with which to run a test. The conversion factor is in the form of a polynomial equation that the user can manipulate by entering various values. Edit Graph: The graph parameters may be edited by using the Edit Graph panel selected from the menu. Auto scaling of axes is allowed from both the Edit Graph panel AND the Main panel. Test Report: The report will appear with all currently visible test data graphed and all header information and comments in their places. System Requirements - Recommended Processor: Pentium 1V 1GHz Memory: 1G Disk Space: 100 MB Video: SVGA Screen Resolution: 1024 x 768 Large Fonts Windows Version: Windows XP Pro Drive: CD-ROM Printer: Windows Compatible | ||||||||
.jpg) | CellMite® ProD Ruggedized High Performance Embedded Data Acquisition and Sensor Monitoring Node Powerful load cell electronics! Ideal for high traffic network applications. Has extended buffering. Model 4349 CellMite ProD Ruggedized High Performance Embedded Data Acquisition and Sensor Monitoring Node The CellMite® ProD Model 4349 is a high performance data acquisition and sensor monitoring module from Electro Standards Laboratories that is suitable for embedded applications that require a ruggedized high speed analog and digital data acquisition unit that is accessible via an Ethernet network. The Model 4349 creates both a low speed monitoring data stream and a high speed transient event data stream that are designed to measure and report both static and pulsed sensor events. Typical sensors can include load cells, temperature sensors, strain gages, general analog outputs, voltages, currents, pulse counting, and digital contacts. Complex systems can be monitored by using a multitude of CellMite® ProD Model 4349 boards as Ethernet monitoring nodes within an Ethernet network. The CellMite® ProD features 11 channels of 12-bit analog inputs that can be sampled up to 10,000 samples/second. Digital data acquisition is also supported with 64-bits of simultaneously sampled digital inputs, 4-bits of isolated digital inputs, and 3 digital counter inputs that are also sampled at up to 10,000 samples/second. The high sampling rates make the Model 4349 perfect for recording important sensor data from transient applications such as pulsed power systems. Direct PC or network communication is supported by a 10/100 BaseT Ethernet data channel with user selectable event and monitor data packet size in order to minimize network congestion. The communication channels are optically isolated in order to minimize system ground loops. For applications requiring on-board data storage, the CellMite® ProD features 750K Words of onboard memory that can be used to buffer transient event data. The CellMite® ProD features a wide input voltage range of 19VDC-36VDC, along with 3kVDC isolation. The CellMite® ProD is designed for ruggedized applications and is designed to operate from -40C to +85C. Applications include: High speed data logging Recording pulsed sensor events Multiple data stream monitoring Multi-rate & mixed signal data recording Recording transient data triggered by events Specifications: Analog Signal Inputs: Analog Input: Very high impedance differential Input Range: +/-10V Resolution: 12-bits Number of Channels: 11 Max. Sampling Rate: 10,000 samples/second, all channels Digital Signal Inputs: Input Type: Logic, TTL, and HC compatible with hysteresis Number of Channels: 64 bits, simultaneously sampled Max. Sampling Rate: 10,000 samples/second Digital Counter Inputs: Excitation: 5 VDC Interface: Single ended TTL, compatible Type: Pulse Channels: 3 Resolution: 8 bits Digital Isolated Inputs: Type: Optically Isolated Channels: 4 Digital Trigger Input: Type: Digital Trigger Source: Any digital input Input Power: Range: 19VDC-36VDC, std, 4.5VDC-9VDC, Others Power: 8.5W (Ex. 300 mA at 28 VDC) Indicators: Discrete: Dual LEDs Mechanical: Size: 7.5" x 5.5" x 1" Mounting: 7 mounting holes Signal Connectors: 2mm ribbon Environment: Operating -40şC to +85şC Communication Interface: Interface Type: 10/100 Base-T Ethernet with flow control Isolation: Optical Monitor Data Format (Continuous Monitoring) Data Packet: Selectable to 20 bytes Data Packet Rate: 0.1 Hz to 10 Hz Data Stream Type: Data Push (continuous monitoring) Data Content: User Specified Analog, Digital, Counter data Event Data Format (Transient Event Monitoring): Data Packet: Selectable to 20 bytes Data Sample Rate: 10 Hz to 10,000 Hz Transmit Packet Size: Selectable Data Stream Type: Triggered Data Push/ Data Pull Data Content: User Specified Analog, Digital, Counter data Buffered Data Storage: 750K Words Ordering: Model/Catalog No. 4349/304349 This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Click here or on GSA icon for details. * Ideal for Commercial Off-the-Shelf (COTS) Application! Municipalities, schools, government: On GSA Schedule! Check out our complete line of CellMite® Intelligent Digital Signal Conditioners! Additional Info: https://www.electrostandards.com/ProductDetail/?productid=2121 | ||||||||
| |
